• Title/Summary/Keyword: 지연선

Search Result 669, Processing Time 0.028 seconds

X-ray Absorption Spectra Analysis for the Investigation of the Retardation Mechanism of Iodine Migration by the Silver Ion Added to Bentonite (벤토나이트에 첨가한 은 이온에 의한 아이오딘 이동 저지 메커니즘 규명을 위한 X-선 흡수 스펙트라 분석)

  • Kim, Seung-Soo;Kim, Min-Gue;Baik, Min-Hoon;Choi, Jong-Won
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.8 no.3
    • /
    • pp.201-205
    • /
    • 2010
  • Most of iodine was captured by the block when NaI solution flowed through a bentonite block sorbed silver to retard the migration of iodine released from high-level radioactive wastes. In order to understand in detail the mechanism for the retardation of the iodine by the silver ion, X-ray Absorption Near Edge Structure (XANES) and Extended X-ray Absorption Fine Structure (EXAFS) spectra of the silver sorbed bentonite before and after the contact with iodide were compared with those of AgO, $Ag_2O$ and AgI as references. This examination suggests that the silver ion sorbed on the bentonite is desorbed, and then it retards the migration of iodine by forming the cluster of AgI precipitate.

Design of the Robust Active Power Filter under the Unbalanced and Distorted Source Voltages in Three-phase Four-wire Systems (전원전압의 불평형 및 왜곡에 강인한 3상 4선식 전력용 능동 필터의 설계)

  • Min Joon-Ki;Kim HyoSung;Choi Jaeho;Kim Kyung-Hwan
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.9 no.5
    • /
    • pp.420-429
    • /
    • 2004
  • This paper proposes a novel current control strategy on active power filters using PQR instantaneous power theory which can compensate the line current harmonics and the neutral line current under the unbalanced and/or distorted source conditions in three-phase four-wire systems. The characteristics of the inverter ac filters are analyzed and a novel digital controller are proposed to overcome the inherent time delay problem in digital controllers with designed control gain in this paper. The proposed current control method is based on a sinusoidal PWM for fully-digital implementation compared with a conventional hysteresis PWM. PSiM simulation results verify the good performance of the proposed current control strategy on shunt type APFs.

Evaluating the Alternative Options for Redevelopment of Airport Idle Facilities (공항 유휴시설의 활용방안에 대한 평가)

  • 박용화
    • Journal of Korean Society of Transportation
    • /
    • v.21 no.3
    • /
    • pp.37-46
    • /
    • 2003
  • Over the last few years, the major airports in Asia have been operating at or close to their capacity. As a result, Korea, Japan, China, Hong Kong, Thailand, Malaysia, and Indonesia decided to expedite the development of new airports. Accordingly, some of the existing airports have been completely used as other functions or purposes and the others operated as a domestic airport. In the latter case, re-development plans are needed for idle facilities. This paper evaluates the alternative options for re-development of idle airport facilities of Seoul Gimpo International Airport. The proposed methodology makes it possible to provide a practical and applicable evaluation of airport re-development plan. In particular, it can take into account the qualitative aspects of different interesting groups such as airport experts. passengers and airport peripheral community. The interview was conducted in order to obtain the different groups' view. To evaluate and select the best option of the airport re-development, this study adopted a fuzzy linguistic approach.

Flammable Evaluation of Plastics for Living by Cone Calorimeter Test (콘칼로리미터 시험법에 의한 생활용 플라스틱의 가연성 평가)

  • You, Jisun;Chung, Yeong-Jin
    • Fire Science and Engineering
    • /
    • v.32 no.3
    • /
    • pp.8-13
    • /
    • 2018
  • It was conceived from the realization that there was a lack of studies on the fire risk compared to utility and importance of plastic which is widely used. In this study, the fire hazard of five types of plastic products was measured by Cone Calorimeter (ISO 5660-1). As a result, the time to ignition (TTI) of polyvinyl Chloride (PVC) plate delayed TTI (196 s), and polystyrene (PS) plate had the shortest TTI of 19 s. The total heat release (THR) of PS plate was measured at 213.07 % higher than the lowest measured PVC plate. Also, the PS plate will have 1.45 to 4.21 times higher $CO_2$ than other plastics, resulting in the highest incomplete combustion and the greatest possible damage of life. Thus, assessing the risk of fire revealed that PS plate is the most dangerous and PVC is the safest.

Quality Characteristics of Cookies with Various levels of Functional Rice Flour (기능성 쌀 쿠키의 품질 특성 연구)

  • L.Kim, Hye-Young;Lee, In-Seon;Kang, Ji-Yoon;Kim, Gee-Yeoun
    • Korean Journal of Food Science and Technology
    • /
    • v.34 no.4
    • /
    • pp.642-646
    • /
    • 2002
  • Pysicochemical and sensory characteristics of cookies with various levels of functional rice flour were investigated in this study. Dough pH of 10% substituted group and Spreadability of 20 and 30% substituted group had significantly higher values than that of control group. Density of Dough had significantly the largest value of 1.27 with 10% substituted sample group. The L value of brightness in control group had significantly the largest value of 69.31. The b value of 20% substituted sample group had significantly the largest value of 35.60. Results of sensory characteristics showed significantly higher savory aroma, savory flavor, hardness and brownness with 10% substituted sample group. Acceptance test of cookies with 20% substituted sample group showed higher overall acceptability than those of others. Quality caracteristics of 10 to 30% subsituted sample groups indicated significantly similar or higher values compared to those of control showing the possibilities of developments in health concerned funtional rice coopkies.

A study on influencing factors of AT4 experiment for the assessment of biological stability of landfilled waste (매립폐기물의 호기성 안정화 평가를 위한 AT4 실험의 영향인자에 관한 연구)

  • Yoon, Seok-Pyo;Kim, Hyung-Wook;Lee, Nam-Hoon;Kim, Kyung;Lee, Byung-Sun
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.19 no.4
    • /
    • pp.53-59
    • /
    • 2011
  • In this study, as a tool of evaluating biological stability of landfilled waste, influencing factors of $AT_4$ method was studied for standardizing the method. As influencing factors, initial lag time, exchanging period of $CO_2$ absorbing agent, and interval of pressure measurement were discussed, and also the relationship between content of dried food waste and $AT_4$ value were compared. Considering heterogeneity of landfilled waste and statistical error range of measurement, authors suggest that the criteria of stabilized landfill waste is $10mg\;O_2/g\;DM$ by $AT_4$ method.

Effect of manufacturing and dispersion of zinc crystalline glaze on crystal formation (아연 결정유약의 제조 및 분산이 결정생성에 미치는 영향)

  • Lee, Chiyoun
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.31 no.6
    • /
    • pp.240-246
    • /
    • 2021
  • In the ceramic industry, a drastic decrease in crystalline formation was found even among the glazes well known for their high crystalline productivity when the ceramic glaze was stored in wet conditions over a period. This study aimed to investigate the reason for decreasing willemite crystals during storage. As the starting materials ZnO, calcined ZnO and frit 3110 are selected; the composition for zinc crystalline glazes was set through a three-component system with the materials. The firing condition was used from previous studies. The study was observed how wet conditions affected the crystallization of zinc crystalline glazes from a day to 24 weeks. The results were obtained by particle size analysis, XRD, Raman spectroscopy and SEM analysis. The results indicated that ZnO is advantageous in terms of willemite crystalline development and growth; however, Zn(OH)2 cluster, formed by the reaction with water during the storage, caused the decrease in ZnO level in the glaze. The reduction of ZnO in the glaze eventually interfered the willemite development and growth.

Calculation of Effective Half-life of Gamma Emission Radionuclide using Bio-kinetic Model (생체역동학 모델을 이용한 감마선 방출 핵종의 유효반감기 계산)

  • Lee, Sang-Kyung;Jeong, Kyu-Hwan;Lee, Ji-Yon;Kim, Bong-Gi;Kim, Jung-Min
    • Journal of Radiation Industry
    • /
    • v.12 no.4
    • /
    • pp.277-285
    • /
    • 2018
  • Patients administered radioisotope for medical purposes are regulated by each country to quarantine them until their body's radioactivity contents decrease below release criteria. To predict the quarantine period and provide it to medical staffs and patients, it is necessary to approach the assessment of the exposure dose of persons due to patients in a realistic manner. For this purpose, a whole-body effective half-life should be applied to the dose assessment equation instead of the physical half-life. In this study, we constructed a bio-kinetic model for each nuclear species based on the ICRP publication to obtain a whole-body effective half-life of 10 unsealed gamma-ray emitting nuclei from the notification of Nuclear Safety and Security Commission, and calculated the effective half-life mathematically by simulating the distribution of the radioisotope administered in the whole body as well as each organ scale. The whole-body effective half-life of $^{198}Au$, $^{67}Ga$, $^{123}I$, $^{111}In$, $^{186}Re$, $^{99m}Tc$, and $^{201}TI$ were 1,93, 2.57, 0.295, 2.805, 1.561, 0.245, and 2.397 days respectively. However, it was found to be undesirable to offer a single value of the effective half-life of $^{125}I$, $^{131}I$, and $^{169}Yb$ because the changes in the effective half-life show no linearity. A bio-kinetic model created for the internal exposure assessment has been shown to be possible to calculate the effective half-life of radioisotopes administered in the patient's body, but subsequent studies of radiolabeled compounds are required as well.

Evaluation on the effectiveness of the activation policy for Seongsu handmade shoes industry (성수동 수제화 산업 활성화 정책의 효과 평가)

  • Kim, Ji-Yeon;Jeong, Jae-Chul;Sang, Jeong Seon;Park, Myung-Ja
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.20 no.4
    • /
    • pp.147-162
    • /
    • 2018
  • The purpose of this study is to conduct a comprehensive and objective evaluation on the effectiveness of the activation policies for the Seongsu handmade shoe industry and to suggest the direction of more effective future policies using the results. The list of the activation policies for the Seongsu handmade shoe industry was investigated and awareness, appropriateness, effectiveness, and satisfaction were measured from the representatives of the Seongsu handmade shoe companies via an off-line survey. A total of 61 usable data sets were statistically analyzed. Based on the evaluation result of the policies, a focus group interview with 6 representatives of the Seoungsu handmade shoe industry was conducted to investigate the causes and effectiveness of the policies and the problems pertaining to those policies. The awareness, effectiveness, and satisfaction of the policies were evaluated as negatives, while the appropriateness of the policies was evaluated as a positive. The manufacturers of the handmade shoes evaluated policies that improve the environment of the workplace higher and evaluated the handmade shoes education policy lower than the distributors and raw materials suppliers. The problems with the activation policies for the Seongsu handmade shoes industry were found to be structural problems, issues with the implementation of the policies, and that the fact that the policies did not reflect the reality of the industry.

Delayed Elimination After High-dose Methotrexate in Pediatric Patients with Acute Lymphoblastic Leukemia and Non-Hodgkin Lymphoma (소아 급성림프모구백혈병 및 비호지킨림프종 환자에서 고용량 methotrexate 투여 후 배설지연)

  • Yoon, Hye Won;Ree, Yoon Sun;Song, Hyo Sook;Kim, Jae Song;Son, Eun Sun
    • Korean Journal of Clinical Pharmacy
    • /
    • v.29 no.2
    • /
    • pp.101-108
    • /
    • 2019
  • Background: High doses of methotrexate (MTX) are often used in various chemotherapy protocols to treat acute lymphoblastic leukemia (ALL) and non-Hodgkin's lymphoma (NHL) in children, but its delayed elimination increases the occurrence of adverse events, such as bone marrow suppression. The aim of this study was to investigate the elimination of MTX at 24 and 48 hours. Methods: We retrospectively analyzed electronic medical records of ALL or NHL pediatric patients who received $5g/m^2$ MTX infusion over 24 hours (between June, 2012 and July, 2018) at the Yonsei University Health System, Korea. The delayed elimination of MTX concentrations was assessed with 100 or $150{\mu}M$ MTX at 24 hours, and 2 or $5{\mu}M$ at 48 hours. Results: Among the 85 MTX cycles administered, 23 cycles were classified in delayed elimination group, and 62 cycles showed normal elimination. At 24 hours, the delayed elimination group with MTX concentration > $100{\mu}M$ showed higher percentage than group with MTX concentration < $100{\mu}M$ (45.8% vs. 19.7%, p = 0.015). However, no differences were observed at $150{\mu}M$ MTX (p = 0.66). At 48 hours, the delayed elimination was higher than the normal elimination at both concentration baselines (p < 0.001 at $2{\mu}M$, p = 0.024 at $5{\mu}M$). Conclusions: MTX concentrations greater than $100{\mu}M$ show high probability of delayed elimination at 24 hours. When MTX levels are above normal, leucovorin and hydration regimens should be continued to prevent delayed elimination.