• Journal of the Korean association of regional geographers
• /
• v.6 no.2
• /
• pp.1-19
• /
• 2000

This study is to investigate and analyze regional patterns of aging in Taejeon Metropolitan city-the overpopulated area of Choong-Cheong Province-by cohort analysis method. According to the population structure transition caused by rapid social and economic changes, Korea has made a rapid progress in population aging since 1970. This trend is so rapid that we should prepare for and cope with aging society. It is not only slow to cope with it in our society, but also there are few studies on population aging of the geographical field in Korea. The data of this study are the reports of Population and Housing Censuses in 1975 and 1985 and General Population and Housing Censuses with 10% sample survey in 1995 taken by National Statistical Office. The research method is to sample as the aging district the area with high aged population rate where the populations over 60 reside among total population during the years of 1975, 1985, 1995 and to sample the special districts of decreasing population where the population decreases very much and the special districts of increasing population in which the population increases greatly, presuming that the reason why aged population rate increases is that non-elderly population high in mobility moves out. It is then verified and ascertained whether it is true or not with cohort analysis method by age. Finally regional patterns in the city are found through the classification and modeling by type based on the aging district, the special districts of decreasing population, and the special districts of increasing population. The characteristics of the regional patterns show that there is social population transition and that non-elderly population moves out. The aging district with the high aged population rate is divided into high-level keeping-up type, relative falling type below the average of Taejeon city in aging progress, and relative rising type above the average of the city. This district can be found at both the central area of the city and the suburbs because Taejeon city has the characteristic of over-bounded city. But it cannot be found at the new built-up area with the in-migration of large population. The special districts of decreasing population where the population continues to decrease can be said to be the population doughnuts found at the CBD and its neighboring inner area. On the other hand, the special districts of increasing population where the population continues to increase are located at the new built-up area of the northern part in Taejeon city. The special districts of decreasing population are overlapping with the aging district and higher in aged population rate by the out-migration of non-elderly population. The special districts of increasing population are not overlapping with the aging district and lower in aged population rate by the in-migration of non-elderly population. To clarify the distribution map of the aging district, the special districts of decreasing and increasing population and the aging district are divided into four groups such as the special districts of decreasing population group-the same one as the aging district, the special districts of decreasing population group, the special districts of increasing population group, and the other district. With the cohort analysis method by age used to investigate the definite increase and decrease of aging population through population transition of each group, it is found that the progress of population aging is closely related to the social population fluctuation, especially that aged population rate is higher with the out-migration of non-elderly population. This is to explain each model of CBD, inner area, and the suburbs after modeling the aging district, the special districts of decreasing population, and the special districts of increasing population in Taejeon city. On the assumption that the city area is a concentric circle, it is possible to divide it into three areas such as CBD(A), the inner area(B), and the suburbs(C). The special districts of increasing and decreasing population in the city are divided into three districts-the special districts of decreasing population(a), the special districts of increasing population(b), and the others(c). The aging district of this city is divided into the aging district($\alpha$) and the others($\beta$). And then modeling these districts, it is probable to find regional patterns in the city. $Aa{\alpha}$ and $Ac{\beta}$ patterns are found in the CBD, in which $Aa{\alpha}$ is the special district of decreasing population and is higher in aged population rate because of aged population low in mobility staying behind and out-migration of non-elderly population. $Ba{\alpha}$, $Ba{\beta}$, $Bb{\beta}$, and $Bc{\beta}$ patterns are found in the inner area, in which neighboring area $Ba{\alpha}$ pattern is located. $Bb{\beta}$ pattern is located at the new developing area of newly built apartment complex. $Cb{\beta}$, $Cc{\alpha}$, and $Cc{\beta}$ patterns are found in the suburbs, among which $Cc{\alpha}$ pattern is highest in population aging. It is likely that the $Cc{\beta}$ under housing land readjustment on a large scale will be the $Cb{\beta}$ pattern. As analyzed above, marriage and out-migration of new family, non-elderly population, with house purchase are main factors in accelerating population aging in the central area of the city. Population aging is responsible for the great increase of aged population with longer life expectancy by the low death rate, the out-migration of non-elderly population, and the age group of new aged population in the suburbs. It is necessary to investigate and analyze the regional patterns of population aging at the time when population problems caused by aging as well as longer life expectancy are now on the increase. I hope that this will help the future study on population aging of the geographical field in Korea. As in the future population aging will be a major problem in our society, local autonomy should make a plan for the problem to the extent that population aging progresses by regional groups and inevitably prepare for it.

• Journal of the Korean Geographical Society
• /
• v.41 no.2 s.113
• /
• pp.150-167
• /
• 2006

This study was conducted to determine the pedogenesis of dense subsurface horizons (denoted either Bx or Bd) observed within closed depressions and in toeslope positions at loess-covered glacial tillplains in southern Wisconsin. Some of these dense subsurface horizons, especially those occurring within depressions, show a close morphological resemblance to fragipans elsewhere, even though the existence of fragipans has not been previously reported in southern Wisconsin. The spatial occurrence of fragipans was first examined over the landscape to characterize general soil-landscape relationships. Detailed physico-chemical and micromorphological analyses were followed to investigate the development of fragipans within a closed depression along a catenary sequence. The formation of fragipans at the study site is a result of sequential processes of physical ripening and accumulation of colloidal materials. A very coarse prismatic structure with a closely packed soil matrix was formed via physical ripening processes of loess deposited in small glacial lakes and floodplains that existed soon after the retreat of the last glacier. The physically formed dense horizons became hardened by the accumulation of colloidal materials, notably amorphous Si. The accumulation intensity of amorphous Si varies with mass balance relationships, which are governed by topography and local drainage conditions. Well-developed Bx horizons evolve at closed depressions where net accumulation of amorphous Si occurs, but the collapsed layers remain as Bd horizons at other locations where soluble Si has continuously been removed downslope or downvalley. Hydromorphic processes caused by the presence of fragipans are degrading upper parts of the prisms, resulting in the formation of an eluvial fragic horizon (Ex).

• Journal of Conservation Science
• /
• v.25 no.1
• /
• pp.1-16
• /
• 2009

Jeollabuk-do is bounded by the sea, and Mahan Baekje culture have been established around a wide plain. Also, in southeastern, it was closed by Gaya kingdom where iron culture was prosperous at that time, a variety of the handles of swords with round pommel is excavated at present. The handles of swords with round pommel is the best amount of excavated objects among the swords with round pommel and producted object for the time. It supposes them to become the foundation of making the decorated swords with round pommel. But, the handles of swords with round pommel that don't have a pattern in handle is indifferent to study because the production method is simple in spite of that the value of archaeological data is sufficient. Therefore, in this study, it examined changed production techniques with the change of times concerning the handles of swords with round pommel of Mahan Baekje Gaya period(before 6C) excavated from Jeollabukdo through using X-rays in order to clarify a variety of production techniques of the handles of swords with round pommel correctly in accordance with a period of production and excavated place. As a result, identified production techniques using X-rays of the handles of swords with round pommel excavated around remains of Mahan Baekje Gaya period shows that production progress improved in order of all-in-one shape, hammer welding shape of the handle of round pommel, and two in body formation in accordance with age. Especially, in two in body shape, it products the handle of round pommel separately, after that it welds the handle of swords and then links the sword blade like a riveting or bottleneck and so on. Despite of improved hammer welding technique, the reason why it didn't utilize is it regards as inlay or gilt will be damaged. And it is judged by using riveting or bottleneck. Also, it appears to techniques of metal craft such as decoration of the handle, decoration of point of sword, inlay, and silver-plating in the period of appearing two in body shape. As clarifying correctly, it provides fundamental database of scientific research about a study of production techniques of handle of swords with round pommel.

• Journal of dental hygiene science
• /
• v.7 no.4
• /
• pp.251-256
• /
• 2007

The purpose of this study was to examine what induced dental hygienists to take up another employment and whether their job satisfaction had anything to do with it in an attempt to help curtail their turnover rate. The subjects in this study were approximately 200 dental hygienists who worked in dental institutions. A survey was conducted from July 24 through September 24, 2006, by using structured, self-administered questionnaires. For data analysis, SPSS 11.5 program was employed to see if their turnover experience was linked to their general characteristics, why they took up another employment, how long they wanted to do that and how their job satisfaction was related to that. The findings of the study were as follows: 1. In regard to turnover experience by age, marital status and career, those who had ever changed their employment accounted for 36.2 percent of the age group from 24 to 26, 83.0 percent of the unmarried ones and 50.0 percent of those whose career was less than one to three years (p < 0.001). By monthly mean income, 50.0 percent of the dental hygienists whose monthly mean income ranged from 1.0 to 1.29 million won had that experience(p < 0.05). The gap between these groups and the others was statistically significant. 2. As for the reason of turnover, working environments were cited most often(28.1%), followed by possibilities(18.0%), relationship with supervisors and colleagues(12.4%), and compensation(4.5%). 3. Concerning a preferred new workplace, 66.2 percent of the dental hygienists who worked in dentist's offices hoped to be newly hired by public dental clinics(p < 0.001). By education, 64.3 percent of the college-educated dental hygienists wanted to work at public dental clinics as well(p < 0.01). 4. The change of employment was under the greatest influence of the possibilities of workplace, followed by workload, pay and relationship with colleagues. All the factors had a negative impact on their turnover. Those who were less satisfied sought new employment more often, and job satisfaction made a statistically significant difference to that. The job satisfaction factors made a prediction of their turnover intention ($R^2=.254$).

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.1
• /
• pp.33-46
• /
• 2017

In Korea, small and medium sized domestic enterprises (SMEs) play an pivotal role in the national economy, accounting for 99.8% of all enterprises, 87.9% of total employment, and 48.3% of production. and SMEs were driving a real force of the development of national economy in many respects such as innovation, job creation, industrial diversity, balanced regional development. Despite their crucial role in the national development, most of SMEs suffer from a lack of R&D capabilities and equipments as well as funding capacity. Government-Supported Research Institute (GRI) can provide SMEs with valuable supplementary technological knowledges and help them build technological capacities. so, In order to effectively support SMEs, government and GRI must be a priority to know about the factors influencing the performance related to technology transfer and technological collaborations. The paper analyzes the effects of Korean IT SMEs Venture external collaborations and technology transfer on their performances, according to their collaboration activities and technology transfer experiences. The results show that there was a significant difference between '3~5times' of technology transfer experience and 'zero technology transfer experience' in the case of technology transfer experience. In case of technological collaboration type, there was a significant difference between 'R&D manpower' and 'enhancement of technological capabilities including core technologies'. The results show that the effectiveness of technology transfer of Korean IT SMEs Venture depends on experiences, types of collaboration activities. so the results of this research will be useful for Government-Supported research institute (GRI)' policy makers when establishing technology commercialization support policies and strategic planning of small and medium sized domestic enterprises.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.551-557
• /
• 2007

This paper describes a study on the permeability reduction of the riverbed ground during urban railway tunnel construction. The research is mainly concentrated on the study of the grouting or injection methods among permeability reduction methods which can be adapted in the riverbed ground. Firstly, the various grouting methods are theoretically reviewed and compared based on the previous research papers and case study results. It is also evaluated the grouting methods in view of a safe construction of the river crossing railway tunnel. Baced on the literature review and previous construction data, the design technology of grouting methods considering the long term hydro-geological behaviour in the riverbed, is suggested. Two injection methods namely, Natural Durable Stabilizer(N.D.S) and Space-Multi Injaction Grouting(S.M.I) methods, are introduced as new approach methods which can be adopted to modify the riverbed ground. In order to evaluate the ground that grouted and modified by the N.D.S and S.M.I method, the pilot test programmes including the field and laboratory permeability tests, are carried out in the river crossing tunnel construction sites. The results obtained from pilot test programme, are also reviewed. In conclusion, the grouting efficiency of the S.M.I method using the non-alcalimeter silica sol is better than that of NDS method using cement. In addition, it hopes that the research results are contributed to develop the grouting design technology.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.5
• /
• pp.626-635
• /
• 2009

The purposes of the study were to identify a comprehensive competency list related to the jobs of nutrition teachers and to compare the competency needs for nutrition teachers and dieticians' competency levels. Job functional areas and a competency list for nutrition teachers were developed based on a review of literature and revised through expert panel reviews. A total of 53 competency statements associated with 11 job functional areas were specified. Questionnaires were distributed to 457 dieticians engaged in school food service and 148 responses were returned (response rate: 32.4%). Excluding incomplete responses, 142 questionnaires were used for data analysis. Approximately half of the respondents were enrolled in an 1-year nutrition teacher certificate program, 25% in a graduate school of nutrition education, and 19% had completed an 1-year nutrition teacher certificate program. The dieticians highly rated requirements of the competencies related to sanitation and employee safety, nutrition counseling, nutrition education, and teaching practices; in contrary, their competency levels for nutrition education, nutrition counseling, and teaching practices were low. Respondents' competency levels were significantly lower than the required competency levels of effective nutrition teachers in all functional areas. A quadratic analysis based on the requirement and self-evaluation of the competencies revealed that priorities of education programs targeting school nutrition teachers or students preparing to be nutrition teachers should be placed on improving competencies related to nutrition education, nutrition counseling, teaching practices, sanitation and employee safety, menu management, and human resource management. These results can be used to develop curriculum materials for basic and continuing professional education for nutrition teachers. It is necessary to review and update competencies regularly to reflect environmental changes in school food service programs.

• Journal of the Korean earth science society
• /
• v.38 no.7
• /
• pp.581-597
• /
• 2017

In this study, we conducted a statistical analysis to see how visitors were satisfied through experiences at the Goseong Dinosaur Museum, which is a representative natural history museum in the Republic of Korea. As a result, during the last 10 years (2005-2014) the total number of visitors to the Goseong Dinosaur Museum was more than 3,410,000 persons. The maximum- and minimum number of visitors per year was more than 440,000 and 300,000 persons, respectively. The annual average number was more than ca. 340,000 persons. Among the visitors, the number of individual visitors was more than 2,800,000 persons (82.0%) and the number of group visitors was about 610,000 persons (18.0%). As a result of the monthly visitor analysis, the maximum number of visitors was about 530,000 persons in August while the minimum number of visitors was about 140,000 persons in February. The visiting patterns of the individual and group visitors were different. There were the largest number of the individual visitors in August and the smallest number of them in December, whereas the largest number of the group visitors in October and the smallest number of them in February. The visitor's residence was generally proportional to the geographical accessibility and the number of people in their residence. The results showed that the degree of visitor's satisfaction using Likert scale was relatively high with the score of 4.1. However, the visitors recommended that some facilities should be improved. Regarding the number of visits and the intention of revisit, 102 persons (53.1%) of 192 made a visit to the museum more than two times, and 178 persons (89.9%) of 198 visitors would like to visit the museum again. It is recommended that the results of this study be used in developing a long term-plan or for the Goseong Dinosaur Museum.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.66-87
• /
• 2009

The definition of the structure of wooden chamber tomb(piled stone-type) is as follows. It is a tomb with wooden chamber, and stones were piled on top of the wooden chamber, and then a wooden structure was placed on top of the piled stones, and more stones were piled on top of the wooden structure, and sealed with clay. Of course this definition can vary according to periods, the buried, etc. Gyeongju-style piled stone type wooden chamber tombs have some distinguished characteristics compared to general definition of piled stone type wooden chamber tombs. Outside the wooden chamber, either stone embankments or filled-in stones were layed out, and pilet-in stones are positioned right above the wooden chamber, and almost every class used this type, and finally, it is exclusively found in Gyeongju area. First generations of this Gyeongju-style piled stone type wooden chamber tombs appeared in first half of 5th century. These tombs inherited characteristics like ground plan, wooden chamber, double chamber(inner chamber and outer chamber), piled stones, burial of the living with the dead, piled stones, from precedent wooden chamber tombs. However these tombs have explicit new characteristics which are not found in the precedent wooden chamber tombs such as stone embankments, wooden pillars, piled stones(above ground level), soil tumuluses. stone embankments and wooden pillars are exclusively found on great piled stone type above-ground level wooden chamber tombs such as the Hwangnamdaechong(皇南大塚). Stone embankments, wooden pillars, piled stones(above ground level) are all elements of building process of soil tumuluses. stone embankments support outer wall of above-ground level wooden chambers and disperse the weight of tumuluses. Wooden pillars functioned as auxiliary supports with wooden structures to prevent the collapse of stone embankments. Piled stones are consists of stones of regular size, placed on the wooden structure. And after the piled stones were sealed with clay, tumulus was built with soil. Piled stones are unique characteristics which reflects the environment of Gyeongju area. Piled stone type wooden chamber tombs are located on the vast and plain river basin of Hyeongsan river(兄山江). Which makes vast source of sands and pebbles. Therefore, tumulus of these tombs contains large amount of sands and are prone to collapse if soil tumulus was built directly on the wooden structure. Consequently, to maintain external shape of the tumulus and to prevent collapse of inner structure, piled stones and clay-sealing was made. In this way, they can prevent total collapse of the tombs even if the tumulus was washed away. The soil tumulus is a characteristic which emerges when a nation or political entity reaches certain growing stage. It can be said that after birth of a nation, growing stage follows and social structure will change, and a newly emerged ruling class starts building new tombs, instead of precedent wooden chamber tombs. In this process, soil tumulus was built and the size and structure of the tombs differ according to the ruling class. Ground plan, stone embankments, number of the persons buried alive with the dead, quantity and quality of artifacts reflect social status of the ruling class. In conclusion, Gyeongju-style piled stone type wooden chamber tombs emerged with different characteristics from the precedent wooden chamber tombs when Shilla reached growing stage.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.243-270
• /
• 2007

Linked pearls pattern expressed on textiles have no limited scale or shape when manufacturing, so they are free in expression. And from the design, material, and color we can analogize the social culture of that age. Oriental linked pearls pattern was started from the Sasanian Persia and introduced through the Silk Road, so it is closely connected with the East and the West culture. This study will consider from the 5th century to the 10th century; the mural costume of the West Central Asia, the ancient textiles excavated from the Sinjiang and Qinghai area of China, and the linked pearls pattern which are collected at Shosoin, Japan. And from this study, will concentrate on clarifying the linked pearls pattern's condition of the cultural exchange between the East and the West and it's structural variation process. The design of linked pearls pattern delivered to the East through the Silk Road is differed by area. For example, in the Western Pamir Plateau, where the ancient Sogdians mainly lived, the excavated linked pearls pattern's subject were deer or cassowary variated from the West Asian motif. But the ones excavated from Kucha Xingang had Chinese motifs added so they showed Chinese characters or Buddhist Bodhisattva image instead of Helios. Like this, the appearance of new patterns, which were accompanied by structural variations, gradually deviated from the standardized pattern of the Sasanian Persia. And this structural variation process has relations with the construction and arrangement method of various patterns of the after ages. The foliated floral Spray, which is placed at the lozenge space of linked pearls' space, had developed into ogival - shaped pattern (Neunghwamun). And the prevalence of geometrical structure pattern after the 10th century and the unfolding method of Tapjamun which is arranging unit pattern in order, are similar to the linked pearl pattern. In brief, linked pearls pattern accompanied by technical improvement let us understand the polished artistic code from its expression, and has importance in showing universal pattern beyond region and culture.