• Composites Research
• /
• v.20 no.6
• /
• pp.21-27
• /
• 2007

Low-velocity impact damage in a composite stiffened panel was detected using built-in piezoelectric active sensor arrays. Using these piezoelectric active sensors, various diagnostic signals were generated to propagate Lamb waves through the structure and the responses were picked up to detect changes in the structure's vibration signature due to the damage. Three algorithms - ADI(Active Damage Interrogation), TD RMS (Time Domain Root Mean Square) and STFT (Short Time Fourier Transform) - were examined to express the features of the signal changes as one damage index. From damage detecting tests, two impact induced delaminations were detected and the location was estimated with the algorithms and diagnostic signals.

• Journal of the Korea Convergence Society
• /
• v.8 no.1
• /
• pp.77-87
• /
• 2017

The purpose of This study was to compare the effect of Convergence-Based russian current(RC) and transcutaneous electrical nerve stimulation(TENS) on pain, muscle strength, function of knee who had a surgical anterior cruciate ligament reconstruction(ACLR). A total of 40 Participants divided into 2 groups, with ACLR, were assigned to russian current group(RCG) or transcutaneous electrical nerve stimulation group(TENSG). Both groups were measured by varieties of tests: visual analog scale(VAS), knee flexion & extension muscle strength, knee injury and osteoarthritis outcome score(KOOS), korean lower extremity functional scale(LEFS). Both groups has shown significant changes within the measurements of VAS, Knee Flexion & Extension muscle strength, KOOS and LEFS. The RCG had more significant increase within knee extension muscle strength, LEFS compared to TENSG. By studying this research, both interventions were effective to ACLR patients, moreover, RC was more effective for knee muscle strength and lower extremity function than the TENS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.459-466
• /
• 2016

This study examined the effects of robot-assisted therapy on the motor and functional recovery of the lower limbs in 53 subacute stroke patients. Robot-assisted therapy was performed using Lokomat? (Hocoma AG, Zurich, Switzerland) for thirty minutes per day, five times a week for four weeks. The outcome measures used were the Fugl-Meyer assessment, Motricity index(MI), Functional ambulation category(FAC), Berg balance scale(BBS) for gait function and balance ability, 10m walking test, K-Modified Barthel Index(K-MBI) for the activities of daily living and Mini mental state examination (MMSE), and Beck's depression inventory(BDI) for depression. All patients recruited underwent these evaluations before and after the four week robot-assisted therapy. For the evaluation, the somatosensory evoked potentials were used to assess the functional recovery. Robot-assisted therapy on the lower limb after subacute stroke showed improvement in motor strength, gait function, and the activities of daily living. All changes in terms of MI, FAC, BBS, and K-MBI exhibited a statistically significant difference after the four weeks robot-assisted therapy. The somatosensory evoked potential result showed a correlation with the MI and K-MBI. Robot-assisted therapy is believed to facilitate the motor and functional recovery of the lower limb in subacute stroke patients.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.153-162
• /
• 2015

A descriptive research is studied to identify the physical factors affecting to cognitive function among elderly residents over 65 years old in a community. The data were collected from 352 participants as part of a health-related survey by home visits in Seoul in 2010-2012. Their cognitive function was measured using the Korean form of Hasegawa Dementia Scale(HDS-K) and the collected data were analyzed by using t-test, ANOVA, and multiple regression analysis. From the analysis, the prevalence rate of cognitive impairment was 13.6%. Elderly residents in a community showed different cognition levels by the status of age, change of weight, change of BMI, walking and flexibility exercise. Especially, the lowest cognition level was found in the normal BMI group with decreased BMI change by over 3. The factors influencing on cognition level of the elderly with normal BMI were age, change of weight, change of BMI, and walking exercise. The variance indicated 12.2% as their cognition level. Therefore, for preventing the cognitive impairment of the elderly that were rapidly decreased of BMI, we need the program to manage their nutrition and walking exercise.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.272-277
• /
• 2001

An experimental study of jet impinging the non-isothermal heating surface with linear temperature gradient is conducted with the presentation of the turbulent flow characteristics and the heat transfer rate, represented by the Nusselt number. The jet Reynolds number ranges from 15,000 to 30,000, the temperature gradient of the plate is 2~4.2$^{\circ}C$/cm and the dimensionless nozzle to plate distance (H/D) is from 2 to 10. The results show that the peak of heat transfer rate occurs at the stagnation point, and the heat transfer rate decreases as the radial distance from the stagnation point increases. A remarkable feature of the heat transfer rate is the existence of the second peak. This is due to the turbulent development of the wall jet. Maximum heat transfer rate occurs when the axial distance from the nozzle to nozzle diameter (H/D) is 6 or 8. The heat transfer rate can be correlated as a power function of Prandtl number, Reynolds number, the dimensionless nozzle to plate distance (H/D) and temperature gradient (dT/dr). It has been found that the heat transfer rate increases with increasing turbulent intensity. The wall jet is influenced by temperature gradient and the effect becomes more important at higher radii.

• Journal of the Korean earth science society
• /
• v.27 no.1
• /
• pp.73-82
• /
• 2006

Dust samples were collected from 10 middle and high schools in the Gochang-Gun, Korea. Heavy metal concentrations were determined for the dry-deposited dusts from indoor and outdoor of classroom and playground of each sampling site. Concentrations of Cd, Cu, Pb and Zn in indoor's dusts were highly concentrated. Also concentrations of Cu, Ni, Pb and Zn in outdoor's dusts were highly concentrated. Concentrations of Cd, Cu and Zn in the dusts were much higher than the world average contents in soil and environmental orientation value. These levels are similar to those of the dust samples at middle schools and high schools located in Jeonju-city, Korea. Compared with concentrations of heavy metals in soils and dusts in Korea, the environment of indoor and outdoor of classroom is highly concentrated except for Cu, Zn. The concentrations of playground is less than that of residential dust and main road dust and playground in Jeonju-city. Playground dusts in 1 school exhibited the enhanced heavy metal pollution with a pollution index (Kloke, 1979) greater than 1.0, but indoor and outdoor dusts in 7 schools exhibited the enhanced heavy metal pollution with a pollution index (by Kloke) yester than 1.0.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.735-747
• /
• 2020

Recent advanced UAV (Unmanned Aerial Vehicle) technology supply new opportunities for estimating crop condition using high resolution imagery. We analyzed the diurnal change of reflectance and NDVI (Normalized Difference Vegetation Index) in UAV imagery for crop monitoring in clear day condition. Multi-spectral images were obtained from a 5-band multi-spectral camera mounted on rotary wing UAV. Reflectance were derived by the direct method using down-welling irradiance measurement. Reflectance using UAV imagery on calibration tarp, concrete and crop experimental sites did not show stable by time and daily reproducible values. But the CV (Coefficient of Variation) of diurnal NDVI on crop experimental sites was less than 5%. As a result of comparing NDVI at the similar time for two day, the daily mean average ratio of error showed a difference of 0.62 to 3.97%. Therefore, it is considered that NDVI using UAV imagery can be used for time series crop monitoring.

• The Journal of Korean Academy of Sensory Integration
• /
• v.19 no.3
• /
• pp.22-31
• /
• 2021

Purpose : This study aimed to conduct a translation, backtranslation, and content validity test of the Sensory Processing Measure (SPM) for Korean children. Methods : The translation and content validation process involved direct and backward translation; a test of equivalence between the two versions (the original SPM and the Korean version SPM; K-SPM) was performed using content-related evidence collected by a group of experts and a group of parents. Data analysis was carried out using Excel Content validity indices (CVI), mean, and standard deviation were used for the analysis of content validity. Results : The result of the comparison between the original SPM and K-SPM in the group of experts was 3.54 ± .74, the S-CVI/Avg for semanticity was .92, and the S-CVI/Avg for structure was .86. The results for the mean of the understanding test and the S-CVI/Avg were 3.48 ± .63 and .94, respectively. Conclusion : K-SPM will considerately be used as an assessment to identify sensory processing, praxis, and social participation issues for children in Korea. Further studies are suggested to increase the age range and the sample size for a more comprehensive applicability of the K-SPM to Korean children.

• Geotechnical Engineering
• /
• v.10 no.4
• /
• pp.153-166
• /
• 1994

In this paper, the experimental study on the behavior of the dredged clay was performed by introducing the consolidation teat method using continuous loading. Also a new testing method was examined and the strength of the dredged clay using thin plate was evaluated. The rheological characteristics of the dredged clay are described by the gingham model. The static and rheologic thin plate penetration test is proposed for the shear strength testing method. It is found that both of testing methods are reasonable and have a practicability. Especially, the strength increases for a water content which is less than two times of liquid limit in case of silty soil and clayey soil. About plasticity index, the strength increases rapidly for a value less than 10 for silt, 5 for clay which a water content is normalized by plasticity index of silty soil rather than clayey soil.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.550-557
• /
• 2008

Delamination damage at a bolt hole in a composite stiffened panel was detected using a built-in piezoelectric active sensor array. Various signal processing techniques were used to detect an invisible small scale delamination around a fastener hole due to localized transverse loading. A built-in piezoelectric sensor array was used to generate diagnostic signals and to measure response signals. Then, the response signals were processed to extract damage-sensitive features. Damage indexes were calculated to estimate the severity and location of the damage from the features.