• Journal of the Korean Data and Information Science Society
• /
• v.23 no.4
• /
• pp.727-738
• /
• 2012

The purpose of the present study was to determine the effect of a 4 week course of Cox distraction manipulation (CDM) combined with therapeutic modalities on the treatment of patients with L4-5 herniated nucleus pulposus (HNP). A total of 15 patients with L4-5 HNP (mean age, 37.76 years; age range 20-50years) participated in the study. A 4 week course of CDM combined with therapeutic modalities was delivered to the patients for 6 days per week for the first two weeks, and three times per week for two additional weeks. The entire treatment consisted of 18 visits over 4 week period. Comparisons of changes in the muscle strengthening (MS), straight leg raise (SLR), and oswestry disability index (ODI) at pre-intervention, after two weeks treatment sessions, and at discharge (after 18 treatment sessions) were analyzed. Comparisons of changes in the disc herniation index (DHI) at pre-intervention and at discharge were analyzed using the paired t-test. There were significant improvements in the outcome measures of MS Ibs, SLR test, and ODI score after 2 weeks and 4 weeks sessions of CDM combined with therapeutic modalities as compared with the pre-intervention. However, no significant different pre-test and post-test DHI. CDM combined with therapeutic modalities appears to be a safe and efficacious, noninvasive treatment modality for patients with L4-5 HNP.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.551-554
• /
• 2009

최근 인터넷 게시판에서 사용자들의 토론과 논쟁이 큰 이슈가 되고 있다. 이러한 논쟁은 게시판을 읽는 사용자들에게 불필요 한 부분이거나, 혹은 관심을 보이는 부분이다. 만약 이러한 논쟁이 있는 구역을 게시판전체에서 논쟁지수를 계산하여 사용자에게 정보를 가져다준다면, 사용자가 직접 글을 파악하지 않고도 논쟁구역을 회피하거나 더 관심 있게 읽을 수 있다. 본 논문에서는 댓글 수나 조회 수 등의 개별적인 정보를 이용하여 파악하는 것이 아니라 글쓴이의 연속된 정보를 가지고 게시판의 특정 부분의 논쟁구역을 찾는 방법을 논하고자 한다. 그래서 논쟁이 있는 인터넷 웹 게시판 사용자들의 논쟁 밀도와 논쟁지수를 정의 하고, 이를 계산하는 방법에 대한 모델을 제시하고자 한다.

• Composites Research
• /
• v.14 no.3
• /
• pp.42-50
• /
• 2001

Modeling of damage initiation in singly oriented ply (SOP) Fiber Metal Laminate (FML) under concentrated loading conditions was studied. The finite element method (FEM) base on the first order shear deformation theory is used for th\ulcorner modeling of damage initiation in SOP FML. The failure indices (FI) of the fiber prepreg and the metal laminate were calculated by using the Tasi-Hill failure criterion and the Miser yield criterion, respectively. To verify the present method, the failure analysis was conducted under uniaxial loading and cylindrical bending, then the analysis under concentrated load was conducted. The results show that the analysis is reasonable. An indentation test was conducted to compare a damage initiation load with a calculated FI. The test was conducted under two side clamped conditions to study the fiber orientation effect. Indentation curve was fitted using the Hertz equation and a damage initiation load is defined that the point which deviate the fitted curve from the real indentation curve. The damage initiation loads were obtained under various fiber orientations and compared with calculated FIs. The experiment was well matched with calculated FI. This results shows that the present method is suitable for the damage initiation modeling of SOP FML.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.253-258
• /
• 1996

원자로의 가동 중지 중이나 재장전시 원자로가 설치되어 있는 수조의 냉각수가 증기발생기 안으로 유입되는 것을 막는 장비로써 노즐댐을 사용한다. 현재의 노즐댐은 알루미늄 재질로 그 무게가 무거워 노즐댐 작업자가 취급하기 어렵다. 이 노즐댐의 경량화와 동시에 구조적 강도를 증가시키기 위해서 비강성이 높은 탄소섬유 강화 복합재료와 굽힘 강성 및 전단강성을 증가시키기 위하여 벌집구조(honeycomb)의 알루미늄을 사용하여 KAERI 노즐댐-II를 설계하였다. 노즐댐에 발생하는 응력 해석을 통하여 중앙판과 측면판의 변위가 충분히 작은 값을 가지면서 파괴지수도 충분히 작은 값이 되는 탄소섬유의 적층각도를 구하였으며, 중앙판은 ［$\pm$15］로 적층하고 측면판은 ［$\pm$45 ］로 적층 하였다. 그리고 각 판의 최대 파괴지수는 중앙판의 경우 0.32, 측면판의 경우 0.27 이었고 최대변위는 각각 3.1mm, 2.7mm로 노즐댐을 사용할 때 예상되는 하중에 대하여 노즐댐의 구조적 건전성을 입증하였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.432-437
• /
• 2002

기계시각을 이용한 포장 정보 수집에서는 태양광 조도변화의 큰 영향을 받는다. 본 연구 에서는 조도변화의 영향을 최소화하기 위해 다음과 같은 방법(1) 흑백 카메라를 사용하는 경우 지수는 Index=(equation omitted)로 선정한다. 여기서 A, B는 각각 목표판과 피사체의 Pixel값 (2) 칼라 카메라를 사용하는 경우 지수는 Index=(equation omitted) 선정한다. 여기서 $A_{\upsilon}$, $B_{\upsilon}$는 각각 목표판과 피사체의 $\upsilon$=(equation omitted) 값. 목표판을 피사체와 동시에 사용하여 같은 위치에서 영상을 촬영하였다. 촬영된 영상에서 목표판과 피사체의 pixel값 혹은 R, G, B값을 선정된 지수(Index)에 대입하여 조도의 영향을 최소화하였다.조도의 영향을 최소화하였다.조도의 영향을 최소화하였다.

• Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.43-48
• /
• 2023

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.553-561
• /
• 2015

The exponential and power law functionally graded material(FGM) theory is reformulated considering the refined shear and normal deformation theory. This theory has ability to capture the both normal deformation effect and exponential and power law function in terms of the volume fraction of the constituents for material properties through the plate thickness. Navier's method has been used to solve the governing equations for all edges simply supported plates on Pasternak elastic foundation. Numerical solutions of vibration analysis of FGM plates are presented using this theory to illustrate the effects of power law index and 3-D theory of exponential and power law function on natural frequency. The relations between 3-D and 2-D higher-order shear deformation theory are discussed by numerical results. Further, effects of (i) power law index, (ii) side-to-thickness ratio, and (iii) elastic foundation parameter on nondimensional natural frequency are studied. To validate the present solutions, the reference solutions are discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.294-297
• /
• 2000

본 연구에서는 압전형 음향변환기를 제작하기 위한 금속과 세라믹스로 적층된 원형의 압전음향소자와 음향변환기 케이스를 설계하였다. 먼저 음향소자인 복합원형평판의 진동운동 방정식을 세우고 그 진동모드를 알아보았다. 음향소자의 세라믹스는 두께 1 mm, 지름 10 mm의 PZT(IV)를 사용하였고, 금속판의 지름과 두께를 다양하게 변화시키면서 음향소자의 공진주파수를 계산하고, 각각의 금속판에 따른 감도지수의 변화를 계산하였다. 설계하고자 하는 음향소자의 공진주파수를 200 KHz로 청하고, 위의 계산을 통하여 음향변환소자에 가장 적합한 금속진동판을 찾아보았다. 음향변환기의 복합원형평판으로 이루어진 음향소자의 물리적 변화에 따른 공진주파수와 감도지수를 구하고 음향변환기 케이스의 공진주파수를 계산하여 압전형 음향변환기에 알맞은 금속진동판과 음향변환기 케이스를 알아보았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.336-343
• /
• 2013

The purpose of the present study was to determine the effect of 4 weeks course of motorized spinal decompression delivered via SpineMT(mobilization & traction) combined with therapeutic modalities on the treatment of patients with lumbar radiculopathy(LRP). A total of 15 patients with LRP (mean age, 36.63 years; age range 20-50years) participated in this study. 4 weeks course of spinal decompression delivered via SpineMT combined with therapeutic modalities was delivered to the patients for 6 days per week for the first two weeks, and four times per week for two additional weeks. The entire treatment consisted of 20 visits over 4 week period. Comparisons of changes in the muscle strengthening (MS), straight leg raise (SLR), and Oswestry disability index (ODI) at pre-intervention, after 10 treatment sessions, and at discharge (after 20 treatment sessions) were analyzed. There were significant improvements in the outcome measures of MS test, SLR test, and ODI score after 10 and 20 sessions of spinal decompression treatment combined with therapeutic modalities as compared with the pre-intervention(p<0.05). Spinal decompression treatment combined with therapeutic modalities appears to be a safe and efficacious, noninvasive treatment modality for patients with LRP.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.3
• /
• pp.1-9
• /
• 2010

In this paper, we used various shear deformation functions for modelling isotropic, symmetric composite and sandwich plates discretized by a mixed finite element method based on the Lagrangian/Hermite interpolation functions. These shear deformation theories uses polynomial, trigonometric, hyperbolic and exponential functions through the thickness direction, allowing for zero transverse shear stresses at the top and bottom surfaces of the plate. All shear deformation functions are compared with other available analytical/3D elasticity solutions, are predicted the reasonable accuracy for investigated problems. Particularly, The present results show that the use of exponential shear deformation theory (Karama et al. 2003; Aydogu 2009) provides very good solutions for composite and sandwich plates.