• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.425-434
• /
• 2008

The mean temperature equation is a key factor in calculating GPS meteorological information. A local mean temperature equation should be used to improve accuracy of GPS PWV (Precipitable Water Vapor). In this paper, four local mean temperature equations, HP, $HP_M,\;HPt_Y,\;and\;HPt_M$ from Ha & Park (2008) were used to analyze the effects of local models in determining GPS PWV. Four different sets of GPS PWVs were compared with radiosonde PWV to validate the accuracies of local models. GPS PWVs of four local models have similar trends compared against radiosonde PWV. The bias and RMS error were the same level: the bias is ${\sim}3mm$ and the RMS is ${\sim}3.6mm$ after the bias was removed. Especially, with $HPt_Y\;and\;HPt_M$ models one can obtain accurate PWVs even without surface temperature measurements. And we investigated dry bias of radiosonde measurements depending on sensor types and observation time at Sokcho weather station. After the radiosonde sensor equipment was changed from RS80-15L to GRS DFM-06, dry bias of radiosonde PWV decreased about 18.2% during daytime (KST 09:00), and 16.1% during nighttime (KST 21:00).

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.2
• /
• pp.214-227
• /
• 2018

An object oriented crop model was developed to perform crop growth simulation taking into account complex interaction between biotic and abiotic factors in an agricultural ecosystem. A set of classes including Atmosphere class, Plant class, Soil class, and Grower class were designed to represent weather, crop, soil, and crop management, respectively. Objects, which are instance of class, were linked to construct an integrated system for crop growth simulation. In a case study, yield of corn and soybean, which was obtained at an experiment farm in Rural Development Administration from 1984 to 1986, were compared with yield simulated using the integrated system. The integrated system had relatively low error rate of corn yield, e.g., <4%, under sole and intercropping conditions. In contrast, the system had a relatively large underestimation error for above ground biomass except for grain compared with those observed for corn and soybean. For example, estimates of biomass of corn leaf and stem was 31% lower than those of observed values. Although the integrated system consisted of simple models, the system was capable of simulating crop yield under an intercropping condition. This result suggested that an existing process-based model would be used to have more realistic simulation of crop growth once it is reengineered to be compatible to the integration system, which merits further studies for crop model improvement and implementation in object oriented paradigm.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.4
• /
• pp.211-217
• /
• 2004

The instrument used in this study consists of a lkg capacity loadcell and a Imm tipping bucket rain gauge. There are two signals: one is the weight of the water in the tipping bucket and the other is the pulse from the reversing mechanism of the tipping bucket. The loadcell measures the weight of water with a 0.0lmm resolution up to 1mm rainfall and the bucket reverses beyond 1mm. From this point, a pulse signal generates and the loadcell starts measuring the weight again. A field test was carried out with the range of rainfall intensity from 42mm/h to 250mm/h. The result shows an error range from -2.2% to + 2.6% in 12 measurement cases with a rainfall of l00mm or more. This result satisfies the WMO recommendation for rainfall intensity instrumentation which allows a 5% range. In a field experiment during 17 to 19 August, 2004, more than 100mm/h rainfall intensity was observed by this instrument, confirming that our instrument has a sufficient capacity of rainfall intensity measurement under extreme conditions like Jangma (Bai-u season). Compared with existing commercial models which employ a water drop measurement method, our method can give a practical solution for diagnostic check of remote rain gauges using two independent signals.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.276-276
• /
• 2015

농경지에서의 액비 수요는 최근 증가하고 있으나 적정 액비시비량에 대한 기준과 사후 관리에 대한 명확한 기준이 없어 환경문제에 대한 고찰이 필요하다. 본 연구에서는 시험포장을 선정하고 논에서의 질소 및 인의 동태를 모니터링하고, 관개수, 배출수 및 침투수 중 영양물질 및 중금속 잔류 특성을 분석하였다. 시험구는 대조구(화학비료 표준시비구, A)와 양돈분뇨액비 표준시비처리구(B)로 구성하였으며, 기상관측 측정을 위하여 자동기상관측기, 유입량은 수도미터계량기로 관측하였으며, 시험포장으로부터 유출량을 측정하기 위하여 압력식수위계를 각 처리구별로 설치하였다. 침투에 의한 영양물질의 유출부하량 평가를 위하여 침투계 1조 및 중금속 포집이 가능한 ceramic porus cup 4조를 각 처리구별로 설치하였다. 2014년 6월 9일 써래질 후, 6월 19일 $15{\times}30cm$, 1주 당 3본씩 "동진벼"를 기계이앙 실시하였고, 대조구 A는 농촌진흥청의 추천시비량, 처리구 B는 지상분무방식(액비시비 후 경운을 하는 방식 및 관개수 공급 후 액비를 시비하는 희석식)을 적용하였다. 기비 시비일은 6월 6일, 분얼비 시비일은 6월 26일, 수비 시비일은 7월 30일이었다. 강우량 대비 유출량 비인 유출률은 0.03에서 0.91까지 나타났으며, 담수의 수질조사는 평시 조사로 주 1회 실시하고 있으며, 분석결과는 SS의 경우 처리구 B가 상대적으로 높게 나타났다. 영양물질(T-N, T-P 등)의 경우는 대조구 A에서 꾸준히 높은 농도를 보여주고 있으며 이들 농도는 시비 시기에 따라 첨두값이 다르게 나타났다. 특히 $TH_3-N$의 경우 휘발성이 강하기 때문에 처리구 B에서 매우 낮은 값을 보여주었다. 유출수의 화학성분 분석결과는 완효성인 화학비료의 특징으로 전체적으로 대조구 A에서 수질농도가 높게 나타났으며, BOD의 경우는 처리구 B에서 높게 나타났다. 침투수의 T-N은 대조구 A에서 상대적으로 높은 값을 보여주고 있으며 이는 $TH_3-N$의 휘발에 영향을 받는 것으로 보이며, $NO_3-N$은 처리구 B에서 더 높게 나타나 토양중으로 침출되는 양이 많은 것으로 나타났다. 본 연구는 액비시용에 따른 농경지 위해성 평가와 관리방안 개발을 위한 1차년도의 연구 성과로서 지속적인 모니터링을 통하여, 향후 새만금 유역내 축산밀집지역에서 나타날 수 있는 축산분뇨 관리정책 개발의 기초자료로 활용될 것으로 기대한다.

• Korean Journal of Remote Sensing
• /
• v.39 no.2
• /
• pp.233-246
• /
• 2023

In terms of understanding the water cycle and efficient water resource management, the importance of soil moisture has been highlighted. However, in Korea, the lack of qualified in-situ soil moisture data results in very limited utility. Even if satellite-based data are applied, the absence of ground reference data makes objective evaluation and correction difficult. The cosmic-ray neutron probe (CRNP) can play a key role in producing data for satellite data calibration. The installation of CRNP is non-invasive, minimizing damage to the soil and vegetation environment, and has the advantage of having a spatial representative for the intermediate scale. These characteristics are advantageous to establish an observation network in Korea which has lots of mountainous areas with dense vegetation. Therefore, this study was conducted to evaluate the applicability of the CRNP soil moisture observatory in Korea as part of the establishment of a Korean cOsmic-ray Soil Moisture Observing System (KOSMOS). The CRNP observation station was installed with the Gunup-ri observation station, considering the ease of securing power and installation sites and the efficient use of other hydro-meteorological factors. In order to evaluate the CRNP soil moisture data, 12 additional in-situ soil moisture sensors were installed, and spatial representativeness was evaluated through a temporal stability analysis. The neutrons generated by CRNP were found to be about 1,087 counts per hour on average, which was lower than that of the Solmacheon observation station, indicating that the Hongcheon observation station has a more humid environment. Soil moisture was estimated through neutron correction and early-stage calibration of the observed neutron data. The CRNP soil moisture data showed a high correlation with r=0.82 and high accuracy with root mean square error=0.02 m³/m³ in validation with in-situ data, even in a short calibration period. It is expected that higher quality soil moisture data production with greater accuracy will be possible after recalibration with the accumulation of annual data reflecting seasonal patterns. These results, together with previous studies that verified the excellence of CRNP soil moisture data, suggest that high-quality soil moisture data can be produced when constructing KOSMOS.

• Journal of the Korean earth science society
• /
• v.33 no.7
• /
• pp.569-582
• /
• 2012

The heavy rainfalls caused large property damages and human casualties. For example, Changma caused 0.25 billion dollars in damages and 57 deaths and 112 missing by accompanying the torrentially convective heavy rainfall in Seoul, 2011. In addition, TY15 (Bolaven) caused a small damage by bringing a relatively small amount of rainfall and strong wind in Gwanju, 2012. The investigation and analyses of these mesoscale processes of rainfall events for different physical properties using KLAPS for weather environments of the above cases were performed. These typical and ideal meoscale systems by better and more favorable cloud systems were chosen to retrieve rain intensity from Radar and Chullian data. The quantitative rain intensities of Radar and Chullian differ greatly from the ground-based gauge values with underestimating over 50 mm/hr at the peak time of hourly maximum rain intensity about over than 85 mm/hr. However, the Radar rain intensity demonstrated approximately lower than 35 mm/hr, and the Chullian rain intensity less than 60 mm/hr for Changma in Seoul, 2011. For typhoon (TY15, Bolaven) in Gwangju, similarly, the quantitative rain intensities of Radar and Chullian differ from the ground-based gauge values. At the peak time, the hourly maximum rain intensity of ground-based gauge was more than 15 mm/hr. However, the Radar rain intensity showed lower than 5 mm/hr, and the Chullian rain intensity lower than 10 mm/hr. Regarding the above two cases of typhoon and Changma, even though Radar and Chullian rain intensities have been underestimated when compared to the ground-based rain intensity, the distributions of time scale features of both Radar and Chullian rain intensities still delineated a similar tendency of rain intensity distribution of the ground-based gauge data.

• Korean journal of applied entomology
• /
• v.51 no.3
• /
• pp.235-243
• /
• 2012

Population dynamics of the American serpentine leafminer, Liriomyza trifolii (Burgess), were observed and modeled in order to compare the effects of air and tomato leaf temperatures inside a greenhouse using DYMEX model builder and simulator (pre-programed module based simulation programs developed by CSIRO, Australia). The DYMEX model simulator consisted of a series of modules with the parameters of temperature dependent development and oviposition models of L. trifolii were incorporated from pre-published data. Leaf surface temperatures of cherry tomato leaves (cv. 'Koko') were monitored according to three tomato plant positions (top, > 1.8 m above the ground level; middle, 0.9 - 1.2 m; bottom, 0.3 - 0.5 m) using an infrared temperature gun. Air temperature was monitored at the same three positions using a self-contained temperature logger. Data sets for the observed air temperature and average leaf surface temperatures were collected (top and bottom surfaces), and incorporated into the DYMEX simulator in order to compare the effects of air and leaf surface temperature on the population dynamics of L. trifolii. The initial population consisted of 50 eggs, which were laid by five female L. trifolii in early June. The number of L. trifolii larvae was counted by visual inspection of the tomato plants in order to verify the performance of DYMEX simulation. The egg, pupa, and adult stage of L. trifolii could not be counted due to its infeasible of visual inspection. A significant positive correlation between the observed and the predicted numbers of larvae was found when the leaf surface temperatures were incorporated into the DYMEX simulation (r = 0.97, p < 0.01), but no significant positive correlation was observed with air temperatures(r = 0.40, p = 0.18). This study demonstrated that the population dynamics of L. trifolii was affected greatly by the leaf temperatures, though to little discernible degree by the air temperatures, and thus the leaf surface temperature should be for a consideration in the management of L. trifolii within cherry tomato greenhouses.

• Journal of the Korean earth science society
• /
• v.36 no.6
• /
• pp.553-566
• /
• 2015

The effects of vertical resolutions and planetary boundary layer (PBL) physics schemes in a numerical simulation with a very high resolution over the metropolitan area were investigated. The numerical experiments using the Weather Research and Forecast model were conducted from 0000 UTC 25 October to 0000 UTC 26 October 2013. We verified the numerical results against with six hourly observation data from the radiosonde at Seolleung, which was located in southern part of Seoul, and forty three auto weather systems in Seoul. In the experiments of vertical resolutions in low level atmosphere with 44, 50, and 60 layers, which are set to be subdivided particularly under 2 km height. The experiment in 60 layers, which has the highest vertical resolution in this study, showed relatively a clear diurnal variation of PBL heights. Especially, the difference of PBL heights and 10-meter wind fields were mainly seen in the area of high altitude lands for the experiments of vertical resolution. In the sensitivity experiment of PBL schemes such as asymmetric convective model-version 2 (ACM2), Yonsei University (YSU), and Mellow-Yamada-Janjic (MYJ) to the temperature, all three PBL schemes revealed lower temperature than observed profile from the radiosonde in the entire period. The experiments with YSU PBL and ACM2 PBL schemes show relatively less biased in comparison with the experiment of the MYJ PBL scheme.

• The Korean Journal of Quaternary Research
• /
• v.14 no.2
• /
• pp.117-123
• /
• 2000

This study examined the spatial distribution of precipitation in Sokcho area. The hourly, daily and monthly precipitation on the 2 stations, 5 AWS in Sokcho area were analyzed by daily, monthly, altitudinal distribution and synoptic environment. The results of the Study are as follows. The amount of Yearly precipitation, 1970~1999 in Sokcho area is gradually increasing. The amount of monthly precipitation 1970~1999 at Sorak weather observation station (altitude 148m), Compared with that in 7 Stations is greatest in spring, Summer and autumn. Because the valleys near Ssangcheon river are funnels for sea wind into Sorak weather observation station. The amount of Summerly precipitation at Mishiryong(1993~1999), the highest altitude in 7 weather observations stations is more 95.2mm than that of Sokcho airport, the lowest altitude, but the amount of winterly precipitation at Sokcho airport is more 89.6mm than that of Mishiryong. When the heavy rainfall and the heavy Snowfall occured in Sokcho area, wind systems were mainly a sea wind (north-north-eastly wind, north-westly wind) and daily mean wind speed was respectively 4.4㎧, 3.6㎧. The amount of the heavy rainfall and heavy snow fall in Sokcho area is closely associated with the north-eastly stream at the lower and the upper level toward the coast of East sea(Sokcho area).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.899-907
• /
• 2022

According to the Unmanned aircraft system Traffic Management (UTM), drones are permitted to fly up to 150m above ground, which is located in the atmospheric boundary layer where there is considerable wind fluctuation due to turbulence. Although it is difficult to predict when turbulence will occur drone aviation safety could be enhanced by having a better understanding of the characteristics of vertical profile of wind in the flight area. We used wind lidar (WIndMast 350M) to observe vertical profiles of wind at the test site for aviation meteorological observation equipment located near Incheon International Airport in July and September, 2022. In this study, we utilized the observed wind profile data to propose a technique for obtaining information that could help improve the drone aviation safety. The Fourier transform analysis is used to evaluate the temporal characteristics of the horizontal wind speed at various vertical levels up to 350m. We also examined the relative contribution of the variance of wind having scales of less than an hour, a crucial scale for drone flight, to the variance of wind having all scales at each vertical altitude for days with and without precipitation.