• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.151-158
• /
• 2009

This study deals with the rear-end collisions in the rural aiea. The objectives of this study are 1) to analyze the characteristics of rear-end accidents of signalized intersections, and 2) to develop the accident models for Cheongju-Cheongwon. In pursing the above, this study gives the particular attentions to comparing the characters of urban and rural area. In this study, the dependent variables are the number of accidents and value of EPDO(equivalent property damage only), and independent variables are the traffic volumes and geometric elements. The main results analyzed are the followings. First, the statistical analyses show that the Poisson accident model using the number of accident as a dependant variable are statistically significant and the negative binomial accident model using the value of EPDO are statistically significant. Second, the independent variables of Poisson model are analyzed to be the ratio of high-occupancy vehicles, total traffic volume and the sum of exit/entry, and those of negative binomial regression are the main road width, total traffic volume and the ratio of high-occupancy vehicles. Finally, the specific independent variables to the rural area are the main road width, the ratio of high occupancy vehicle, and the sum exit/entry.

• 한국도로학회:학술대회논문집
• /
• 2008.10a
• /
• pp.307-320
• /
• 2008

• Transportation Technology and Policy
• /
• v.5 no.4
• /
• pp.69-79
• /
• 2008

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.105-116
• /
• 2007

A ROUNDABOUT is more effective way to improve safety and prevent delays than signal intersection. ROUNDABOUT has been known highly safe treatment that could be used as a method to reduce conflicts between vehicles, to reduce travel speed in inner or approach of intersection, and to have no speed difference between drivers than intersection. In this study, the effective analysis on the installation of ROUNDABOUT was carried out using computer-based simulation tool VISSIM, in order to evaluate performance and safety of ROUNDABOUT and develope a warrant. In conclusion, the results indicated that there was remarkable increase of Y-intersection capacity and decrese of delay, and improvement of traffic safety. Finally, A nice feature of this study is to firstly attempt to use microscopic simulator to evaluate the effectiveness of ROUNDABOUT and suggest a passible operation boundary.

• 한국도로학회:학술대회논문집
• /
• 2010.09a
• /
• pp.245-250
• /
• 2010

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.4
• /
• pp.64-75
• /
• 2017

Previous count models using fixed parameter can not consider the unobserved heterogeneity, as the standard error of the count value is underestimated, excessive t-values are derived thereby reducing the reliability of the model. Also, the study of unsignalized intersections are inadequate because of the difficulty of collecting data and statistical limits for accurate analytical processes compared to the signalized intersections. The purpose of this study is to analyze the factors affecting traffic accidents by constructing the count model using random parameters, and it aimed to distinguish between existing studies based on the rural unsignalized intersections. As a result of the analysis, 7 variables were presented as significant variables, and 2 variables(presence of crosswalk, speed limit) were presented as random parameter.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.77-83
• /
• 2011

This study deals with the effectiveness of roundabout. The goal is to comparatively analyze the operational effectiveness related to the conversion of rotary to roundabout in Korea. In pursuing the above, this study gives particular attentions to investigating the existing 20 rotaries and developing the networks of before-and-after improvement using VISSIM, and comparatively analyzing the effectiveness. The domestic rotaries were analyzed to need many improvements of geometric structure for the effective operation of roundabout. The main results are as follow. First, when the present condition of traffic volume were applied, the operational effect of rotary were evaluated to be better than roundabout, but the difference analyzed to be small. Second, the average delay per vehicle in the rotaries of urban area were analyzed to rapidly increase according to the growth of traffic volume. Finally, the average speed of roundabout were evaluated to be less (about 10km/h) than that of rotary, because the traffic volume of rural area were less than that of urban area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.52-63
• /
• 2009

Recently in Korea, in the case of metropolis, the urban signalized intersections are controlled by traffic information center or ITS center. Cheon-an City also established traffic information center through the 1st.-$\sim$3rd. ITS public construction and has managed this center that includes bus information service, traffic information collection and providing service, parking information service, and traffic responsive control system. In the Cheon-an metropolitan traffic signal operation, traffic signal controllers were grouped by the each main traffic flow axes and performed with coordinated signal timing for the signalized arterials, and also cycle and split changed by realtime traffic demands. Cheon-an urban traffic responsive control system was evaluated by intersection delay and speed, then it was verified that the delay decreased and vehicle speed improved. However, the rural signal control system to connect adjacency town was evaluated to have lower status than urban area due to the unimproved TOD (Time of day) plan. Therefore actuated signal control was examined for substitutive control system in isolated signal intersection. The aim of this article is to compare actuated signal control with TOD mode in the rural intersection of Cheon-an and to fine superiority of these two control mode, with evaluation of vehicle delay by using HCM(2000) method and by micro-simulation CORSlM. The result of field test show that actuated signal control gave better performance in delay comparison than the existing TOD signal control. And simulation outcome verified that non-optimized TOD has higher delay than optimized TOD mode, non-optimal actuated mode, and optimal actuated signal control mode. Particularly, these three modes delays had not different values according to the paired sample t-test. This is because small traffic demands were loaded in each links. This suggested actuated signal control is expected to be more effective than TOD mode in some rural isolated intersections which frequently need to survey for traffic volume.

• Proceedings of the KOR-KST Conference
• /
• 2007.11a
• /
• pp.374-383
• /
• 2007

• Journal of Korean Society of Transportation
• /
• v.33 no.6
• /
• pp.554-563
• /
• 2015

This study dealt with developing an accident model for rural signalized intersections with random parameter negative binomial method. The limitation of previous count models(especially, Poisson/Negative Binomial model) is not to explain the integrated variations in terms of time and the distinctive characters a specific point/segment has. This drawback of the traditional count models results in the underestimation of the standard error(t-value inflation) of the derived coefficient and finally affects the low-reliability of the whole model. To solve this problem, this study improves the limitation of traditional count models by suggesting the use of random parameter which takes account of heterogeneity of each point/segment. Through the analyses, it was found that the increase of traffic flow and pedestrian facilities on minor streets had positive effects on the increase of traffic accidents. Left turning lanes and median on major streets reduced the number of accidents. The analysis results show that the random parameter modeling is an effective method for investigating the influence on traffic accident from road geometries. However, this study could not analyze the effects of sequential changes of driving conditions including geometries and safety facilities.