• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.161-161
• /
• 2011

지진, 산사태, 액상화 등의 지질재해 예측을 위한 지역적 지반특성을 규명하기 위해서 지질도 또는 지형도를 이용하여 간접적인 방법이 사용되기도 한다. DEM에서 추출한 경사도는 지반분류 시 하나의 기준으로 사용되어질 수 있고, 이때 DEM의 해상력에 따라 그 결과가 다르게 산출될 수도 있다. 이번 연구에서는 DEM의 해상력에 따라 우리나라 일부지역의 지반분류 결과에 어떤 영향을 미치는지 살펴보았다. 각기 다른 해상도의 DEM을 적용하여 우리나라 동남부 지형을 경사도 기준으로 지반분류한 후 그 면적차이를 해상도별로 비교한 결과, 지반분류 C 지역의 면적 변화가 가장 뚜렷하였다. $V_s30$ 범위로 분류한 결과에서는 180 m/sec 이하의 지역에서 해상도별로 가장 큰 변화가 있었다. 고해상도에서는 지반분류 B와 E의 지역에서 면적이 저해상도 보다 크게 산출되는 경향이 있었고, 저해상도에서는 지반분류 C와 D 지역의 면적이 고해상도 보다 크게 산출되는 경향이 있었다. 이는 DEM의 해상도가 낮아질수록 각기 다른 지반정보를 함유한 작은 셀이 큰 셀로 만들어지는 과정에서 평균화되는 지반정보가 과대평가 또는 저평가되었기 때문이다. 연구지역 내 시추지역의 지반과 지반분류 결과를 비교하면 해상도별로 78%~52%까지 일치하였고, 고해상도에서 일치율이 더 높았다. 지형의 변화가 심하고 인구나 산업시설이 밀집된 재해 고위험군 지역은 고해상도의 지도를 이용하고, 지형의 변화가 없거나 단단한 지반의 지역은 재해가 상대적으로 작아서 저해상도의 사용으로 자료처리 시간의 효율성을 증대시키는 방안도 생각할 수 있다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.1 s.53
• /
• pp.59-65
• /
• 2007

Site classification of IBC and KBC is based on the ft-kips unit system and is not friendly for the linear interpolation of the site coefficients due to the implicit relationship between a site class and site coefficients, defining a site class by the range of the soil properties, not by a single soil property. Also, the site class definition of KBC has too wide range of soil properties for each soil class. making the structural engineers difficult to estimate the site coefficients for the diverse soil layers. In this study, a new site classification in SI unit system was proposed for the seismic design codes of KBC etc., and the comparison of the site coefficients of $F_{a}\;and\;F_{v}$ was also performed to investigate the possibility of the linear interpolation of the site coefficients with the proposed new site classification. According to the study results, it was more reasonable for the linear interpolation of the site coefficients to utilize the proposed new site classification considered the Sl unit system and the soil characteristics of the 30m soil layer beneath the shallow embedded foundation, and the linear interpolation of the acceleration coefficients for the design spectrum can be performed more reasonably defining the site coefficients for the representative shear wave velocities of each site class. With the study results, a new site classification, and the linear interpolation permitted acceleration coefficients fer the design spectrum were proposed for the modification of the seismic design regulations of KBC.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.21-28
• /
• 2011

Site conditions affect the magnitude of loss due to geologic hazards including, but not limited to, earthquakes, landslides and liquefaction. Reliable geologic loss estimation system requires site information which can be achieved by GIS-based method using geologic or topographic maps. Slope data derived from DEM can be an effective indicator for classifying the site conditions. We studied and discussed the effect of different DEM resolutions in the site classification. We limited the study area to the south-eastern Korea and used two different resolutions of DEMs to observe discrepancies in the site classification results. Largest discrepancy is observed in the areal coverage of site class C(very dense soil and soft rock) and E(soft soil). Comparison of results shows that more areas are classified as site class B(general rock) or E(soft soil) when we use higher resolution DEM. The comparison also shows that more areas are classified as site class C or D(stiff soil) using lower resolution DEM. The comparison of results using resampled DEMs with different resolutions shows that the areal coverage of site class B and E decreases with decreasing resolutions. On the contrary, areal coverage of site class C and D increase with decreasing resolutions. Loss estimation system can take advantage of higher-resolution DEMs in the area of rugged or populated to obtain precise local site information.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.2 s.48
• /
• pp.63-71
• /
• 2006

In the companion paper (II, Development of Site Classification System), new size classification system based on site periods $(T_G)$ was recommended for legions of shallow bedrock depth in Korea. Despite the site classification method was improved, the response spectrum would be required to be modified by adjusting the integration interval to calculate the site coefficients because the response spectra did not match well the average spectral accelerations obtained by site response analyses in the range of long periods. In this paper, new response spectra for each site categories were determined by adjusting the integration interval of long period site coefficient $F_v\;from\;0.4{\sim}2.0\;to\;0.4{\sim}1.5$ second. It matched well the average spectral accelerations and new response spectrum, and it was also improved compared to the current she classification system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.2 s.48
• /
• pp.51-62
• /
• 2006

In the companion paper (I-Problem Statements of the Current Seismic Design Code), the current Korean seismic design code is required to be modified considering site characteristics in Korea for the reliable estimation of site amplification. In this paper, three site classification methods based on the mean shear wave velocity of the top 30m $V_{S30}$, fundamental site periods $(T_G)$ and bedrock depth were investigated and compared with each other to determine the best classification system. Not enough of a difference in the standard deviation of site coefficients $(F_a\;and\;F_v)$ to determine the best system, and neither is the difference between the average spectral accelerations and the design response spectrum of each system. However, the amplification range of RRS values based on $T_G$ were definitely concentrated on a narrow band than other classification system. It means that sites which have a similar behavior during earthquake will be classified as the same site category at the site classification system based on $T_G$. The regression curves between site coefficients and $T_G$ described the effect of soil non linearity well as the rock shaking intensity increases than the current method based on $V_{S30}$. Furthermore, it is unambiguous to determine sue category based on $T_G$ when the site investigation is performed to shallower depth less than 30m, whereas the current $V_{S30}$ is usually calculated fallaciously by extrapolating the $V_s$ of bedrock to 30m. From the results of this study, new site classification system based on $T_G$ was recommended for legions of shallow bedrock depth in Korea.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.101-115
• /
• 2005

For the site characterization at two inland areas, Gyeongju and Hongsung, which represent geomorphic and geologic characteristics of inland region in Korea, in-situ seismic tests containing borehole drilling investigations and resonant column tests were peformed and site-specific seismic response analyses were conducted using equivalent linear as well as nonlinear scheme. The soil deposits in Korea were shallower and stiffer than those in western US, from which the site coefficients and site classification system in Korea were derived. Most sites were categorized as site classes C and D based on the mean shear wave velocity $(V_s)$ of the upper 30 m $(V_s30)$, ranging between 250 and 650 m/s. According to the acceleration response spectra determined from the site response analyses, the site coefficients specified in the current Korean seismic design guide underestimate the ground motion in the short-period band and overestimate the ground motion in mid-period band. These differences can be explained by the differences in the bedrock depth and the soil stiffness profile between Korea and western US. The site coefficients, $F_a$ for short-period and $F_v$ for mid-period, were re-evaluated and the site classification system, in which sites C and D were subdivided according to $V_s20,\;V_s15,\;and\;V_s10$ together with the existing $V_s30$ was introduced accounting for the local geologic conditions at inland region of the Korean peninsula. The proposed site classification system in this paper is still rudimentary and requires modification.

• Geotechnical Engineering
• /
• v.14 no.4
• /
• pp.163-176
• /
• 1998

To apply piezocone test to soil classification, several classification charts based on correlations between its results and basic characteristics of soils have been developed. However, it is necessary to investigate their applicability to Korean soil, since they were the results obtained from the limited number of foreign sites. In this study, 41 piezocone penetration bests for various sixtes spreading widely over Korean territory were carried out. Correlations between piezocone teat results and basic characteristics and the applicability of existing classification charts were investigated. Conclusively, new classification charts based, on Unified Soil Classification System were developed with a local confidence.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.3
• /
• pp.25-34
• /
• 2012

In order to verify that the recently proposed two-parameters site classification system and the corresponding site coefficients are suitable for the local geological conditions in Korea, a comparison was conducted with current Korean seismic code, Eurocode-8, NYC DOT seismic code. The design spectrum of the current Korean seismic code is significantly amplified in the long-period range, whereas the other response spectra, including the proposed two-parameters approach, are significantly amplified in the short-period range, which is a typical geological condition in Korea. In addition, based on the results of site response analyses in the specific $10km{\times}10km$ area of Gyeongju, spatial distributions of site coefficients from site-specific seismic response analyses were compared with the proposed site coefficients, as well as those specified in the current Korean seismic code. The site coefficients ($F_a$ and $F_v$) from the current Korean seismic codes show significantly high spatial error distributions compared with those specified by the two-parameters site classification system. Therefore, the proposed system is suitable for regions of shallow bedrock including the Korean peninsula.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.63-74
• /
• 2008

Site response analyses were performed based on equivalent linear technique using the local geologic and dynamic site characteristics, which include soil profiles, shear wave velocity profiles and depth to bedrock for 125 sites collected in Korean Peninsula. From the results of site response analyses, 2-parameters site classification system based on the combination of mean shear wave velocity of soil and depth to bedrock was newly recommended for regions of shallow bedrock depth in Korea. First, as the borders of bedrock depth (H) for site classification were determined as 10m and 20m, the soil sites were divided into 3 classes as $H_1$, $H_2$ and $H_3$ sites. And then, the 3 site classes were subdivided into 7 classes based on the mean shear wave velocity of soil ($V_{s,soil}$). The feasibility of new site classification system was verified and the representative site coefficients ($F_a$ and $F_v$) and design response spectrum were suggested by analyzing uniform trend and dispersion of site coefficients for each site class. The suggested site coefficients and the regression curves present the nonlinear characteristics of soils according to the change of rock outcrop acceleration with uniform trend effectively. From the comparison between the mean values of response spectrum which was acquired from the site response analysis and the suggested design response spectrum, there was a little difference in some of site classes and it was verified to adjust the integration interval to make it more suitable for the site condition in Korea.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.06b
• /
• pp.51-64
• /
• 2003

Bieniawski에 의해 개발된 RMR은 암석강도 및 불연속면, 지하수 등의 6개 인자에 따라 분류되어, 이들을 합산하여 결정된다. RMR 분류법은 각 요소들에 대한 평가가 비교적 쉽고, 다양한 응용을 거쳐 여러 분야에 적용되어 국내에서도 가장 널리 사용하고 있는 암반분류 방법 중의 하나이다. RMR 분류결과는 터널의 유지시간, 최대 무지보폭의 예측, 지보량 산정, 암반의 물리적 특성값 예측 등에 적용될 수 있다. 또한 RMR 분류법을 사면안정, 댐 기초, 심부 광산 등에 적용하거나, RMR 분류법의 미비한 부분을 보완하기 위한 여러 가지 수정방법이 제시되었다.