• Geotechnical Engineering
• /
• v.20 no.4
• /
• pp.38-49
• /
• 2004

해상 반사법탐사는 해저 지반의 지층구조를 파악하는 기술로서 해저지층에 부존하는 가스나 골재 등 해저자원 탐사와 해저의 저장시설 건설, 파이프라인 설치 등 다양한 해양 토목공사를 위한 지반조사에 사용된다. 해상 반사법탐사의 기본적인 원리는 해수면 근처에서 인공적으로 음파를 발생시켜 해저면 하부의 지층으로 침투시키면 서로 다른 물성을 갖는 지층의 경계면에서 일부 음파는 반사되는데, 이 반사파를 수신하는 것이다. 탐사과정에서 얻어진 트레이스에는 반사파 이외에도 직접파, 다중반사파와 같은 잡음이 섞여있는데 자료처리를 통해 탄성파 단면도를 작성하고, 이를 해석하여 해저지반의 지질학적 구조를 파악하는 것이 해상 반사법탐사의 목적이다.

• The Journal of Engineering Geology
• /
• v.22 no.3
• /
• pp.293-307
• /
• 2012

Shear wave velocity is commonly invoked in explaining geophysical phenomena and in solving geotechnical engineering problems. In particular, the importance of shear wave velocity in geotechnical earthquake engineering has been widely recognized for seismic design and seismic performance evaluation. In the present study, various insitu seismic tests were performed to evaluate geotechnical dynamic characteristics at 183 sites in Korea, and shear wave velocity profiles with depth were determined to be representative of the dynamic properties at the investigated sites. Subsurface soil and rock layers at the target sites were reclassified into five geotechnical layers: fill, alluvial soil, weathered soil, weathered rock, and bedrock, taking into account their general uses in geotechnical earthquake engineering practice. Average shear wave velocity profiles for the five geotechnical layers were obtained by synthesizing the shear wave velocity profiles from seismic tests in the field. Based on the profiles, a representative shear wave velocity value was determined for each layer, for use in engineering seismology and geotechnical earthquake engineering.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3C
• /
• pp.167-174
• /
• 2010

In this study, numerical analysis has been performed to compare the ground movements in a single ground layer and multiple ground layers due to nearby tunnel excavation. The numerical analysis has been conducted in the different ground layer conditions considering different construction conditions (volume loss at excavation face), and the results of the maximum surface settlement and horizontal displacement have been compared considering the ground layer and construction conditions. In addition, the maximum surface settlement from the numerical analysis has been compared with the maximum settlement at tunnel crown considering the ground layer and construction conditions, and the maximum surface settlement has been also compared with the maximum horizontal displacement with the ground layer conditions. Besides, the volume loss($V_L$) at tunnel excavation face has been compared with the total surface settlement volume($V_s$) with the variation of ground layer condition. The results from the numerical analysis have been compared with field measurements and by this comparison it is believed that the numerical results in this study can be utilized practically in analyzing the nearby ground behavior in different ground layer and construction conditions due to tunnel excavation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.425-434
• /
• 2019

It is important to ensure the seismic safety of pile-bent bridges constructed in areas with thick soft ground consisting of various soil layers against seismic motion in these layers. In this study, several synthetic seismic waves that are compatible with the seismic design spectrum for rock sites were generated, and the ground acceleration history of each soil layer was obtained based on ground analyses. Using these acceleration histories, each soil layer was modeled using equivalent linear springs, and multi-support excitation analyses were performed using the input motion obtained at each soil layer. Due to the nonlinear behavior of the soft soil layers, the intensity of the input ground motion was not amplified, which resulted in the elastic behavior of the bridge. In addition, inputting the acceleration history obtained from a particular layer simultaneously into all the ground springs reduced the response. Therefore, the seismic performance of this type of bridge might be overestimated if multi-excitation analysis is not performed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.6 s.46
• /
• pp.67-73
• /
• 2005

Precise analysis of soil-structure interaction requires a proper description of soil profile. However, such approach becomes generally nearly unpractical for soil exhibiting material discontinuity and complex geometry since meshes should match that material discontinuity line. To overcome these difficulties, a different numerical integration method is adopted in this paper, which enables to integrate easily over an element with material discontinuity without regenerating mesh fellowing the discontinuity line. As a result the mesh is highly structured, loading to very regular silliness matrix. The influence of the shape of soil profile on the response is examined and it is seen that the proposed soil-structure analysis method can be easily used on soil-structure interaction problems with complicated soil profile and produce reliable results regardless of material discontinuities.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.319-322
• /
• 2002

그라우팅으로 지반 개량된 조간대 퇴적층의 지층구조를 규명하기 위한 방법으로 전기비저항탐사, 굴절법 탄성파탐사, 지하레이더탐사를 실시하였다. 연구대상 지반의 10m 전후 심도에서 해수의 영향을 받는 수평의 저비저항대가 발달하며, 저비저항대는 모래가 우세한 지층에 해당한다. 지반의 탄성파 속도는 1~3km/sec의 범위로 조간대의 미고결 퇴적층과 비교할 때 매우 높은 속도에 보여준다. 지반의 높은 속도는 지반 개량의 효과로 판단된다. 지하레이더탐사에서 퇴적층의 구성 물질에 따라 교반 정도가 달지는데 모래층은 퇴적물과 주입제의 교반이 잘 이루어져 불규칙한 반사면으로 나타나며, 점토층은 교반이 불량하여 개량된 부분은 주상으로 관찰된다. 물리탐사의 결과와 시추조사를 대비할 때 지반 개량은 기반암까지 시행되었으며, 양호한 암반을 지시하는 고비저항대와 고속도층은 내륙으로 갈수록 깊은 심도를 보여준다. 이것은 지반 개량 이전의 기반암 심도와는 상반되는 것으로 지반 개량의 효과는 해안방면의 지층에서 잘 나타난다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5C
• /
• pp.239-250
• /
• 2009

Tunnelling-induced settlements and lateral ground movements have been investigated by numerical parametric studies considering ground condition, excavation characteristics, and ground layers. Before the numerical study the existing methods of ground movement estimation have been collected and analysed to have some information of ground movements and to improve them providing a fundamental material for the numerical study. Numerical model simulation has been performed of a physical model test of tunnel excavation in which the ground movements were measured reliably and the results have been used to determine the numerical approach and the appropriate soil constitutive mode. With this procedure done, the results of numerical parametric studies have been put together to analyze and understand tunnelling-induced settlements and lateral ground movements.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.2
• /
• pp.55-68
• /
• 2006

For the reliable prediction of spatial geotechnical data, a procedure to build the Geotechnical Information System (GTIS) based on geo-knowledge within the frame of GIS technology was developed by introducing a couple of new concepts of the extended area containing the study area and the additional site visit for acquiring surface geological data. To build the GTIS for Gyeongju as the case study of regional model application, intensive site investigations and pre-existing geotechnical data collections were performed and additional site visit was also carried out for acquiring surface geo-layer data in accordance with the developed procedure. Within the GTIS based on geo-knowledge for Gyeongiu area, the spatially distributed geo-layers across the extended area were predicted using the geostatistical kriging method and those for the study area were extracted. Furthermore, the spatial distribution maps for the thickess of geo-layers and the depth to bedrock were constructed for the practical use in geotechnical field. It was evaluated that the GTIS based on geo-knowledge developed in this study is superior to the conventional geotechnical GIS in terms of both the standard deviation and the geological expert judgment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.137-144
• /
• 2019

For the structures near the seismogenic fault, the evaluation of seismic performance against near-fault ground motions is important as well as for design ground motions. In this study, characteristics of seismic behaviors and seismic performance of the pile-bent bridge constructed on the thick soft soil site with various weak soil layers were analyzed. The input ground motions were synthesized by the directivity pulse parameters for intra-plate regions. The ground motion acceleration histories of each layer were obtained by one-dimensional site response analysis. Each soil layer was modeled by equivalent linear springs, and multi-support excitations with different input ground motions at each soil spring were applied for nonlinear seismic analyses. The analysis result by the near-fault ground motions and ground motions matched to design spectra were compared. In case of the near fault ground motion input, the bridge behaved within the elastic range but the location of the maximum moment occurred was different from the result of design ground motion input.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.49-62
• /
• 2022

Borehole Data is geotechnical information provided so that workers can safely perform construction at the field. It creates 3D data and supports viewing as a 3D image. Currently, all Korean companies that develop programs using 3D visualization use the MVS program developed by C Tech Development Corporation. However, the MVS program is a commercial program, and it is difficult to use MVS in 3D related programs developed by Korean Companies. In this paper, we propose to develop a program that can replace MVS to generate a 3D stratum model from clustered borehole information using Python's Gempy open-source. The 3D stratum model program can creates point data for each stratum and can creates a surface for each stratum through interpolation. Then, the 3D stratum model program is completed by merging the surfaces of each stratum. It was confirmed that there was no difference when a 3D model was created and compared with the MVS program and the proposed program from the borehole data of a Goyang area.