• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.112-118
• /
• 2013

The selection of appropriate ground motions and reasonable modification are becoming increasingly critical in reliable prediction on seismic performance of structures. A widely used amplitude scaling approach is not sufficient for robust structural evaluation considering a site specific seismic hazard because only one spectral value is matched to the design spectrum typically at the structural fundamental period. Hence alternative approaches for ground motion selection and modifications have been suggested. However, there is no means to evaluate such methodologies yet. In this study, it is focused to describe the main questions resided in the amplitude scaling approach and to propose a regression model for structural damage as point of comparison. Spectrum compatible approach whose resulting spectrum matches the design spectrum at the entire range of the structural period is considered as alternative to be compared to the amplitude scaling approach. The design spectrum is generated according to ASCE7-05.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.463-472
• /
• 1994

A method of stochastic response analysis of base-isolated fluid-filled pool structures subject to random ground excitations is studied. Fluid-structure interaction effects between the flexible walls and contained fluid are taken into account in the form of added mass matrix derived by FEM modeling of the contained fluid motion. The stationary ground excitation is represented by Modified Clough-Penzien spectral model and the nonstationary one is obtained by imposing an envelope function on the stationary one. The stationary and nonstationary response statistics of the two different isolation systems are obtained by solving the governing Lyapunov covariance matrix differential equations.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.3
• /
• pp.1-10
• /
• 1997

It is recognized that the dynamic of a structure is affected by the characteristics of the soil layer and foundation. However the design codes for the seismic design of structures are partially reflecting the caharcteristics of the soil layers due to the inherent complexity of them and the lack of systematic study results for the foundation-soil system, and leading to unconservative or too conservative results. In this study, the kinematic interaction effects of foundation-soil system was investigated for the seismic analyses of structures estimating the effects of the shear wave velocity, the depth of the soil layer, the embedment of a foundation and pile foundation, and the modified classification criteria of soil layers are proposed for the reasonable seismic analyses of structures considering the characteristics of soil layers and foundations. For the embedded medium or large foundations (including pile foundations), at least 60m soil layer below the foundation should be considered for the seismic analyses of structures to tate into account the kinematic interaction effects of the foundation-soil system, and also the rocking motion of foundation-soil system with or without piles should be included in the seismic analyses of structures.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.1
• /
• pp.55-62
• /
• 2010

Dynamic soil resistances were simulated by modified Ramberg-Osgood model in order to predict penetration rate of sheet pile installed by vibratory pile driver. Various factors which characterize modified Ramberg-Osgood model were determined considering the shapes of dynamic soil resistance curves obtained from field test and standard penetration value (N value) was used as parameter that relates field test results to the suggested model. Penetration rates calculated by analytical model were smaller than those of field test and penetration times were vice versa. Therefore, predicted penetration rate and penetration time by analytical model are more conservative than those of filed test.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.1
• /
• pp.13-34
• /
• 2000

본 연구에서는 서기 2년부터 1977년까지 남.북한 역사지진(A.D 2-1904)과 초기 계기 지진(1905-1977) 목록을 이용하여 남한 지진 규모로 재조정된 지진목록을 작성하였다 역사 지진은 과거의 협소한 인구분포로 인해 지진 기록의 누락이 많앗다 지진 위험도를 작성하기 위해 지진 발생분포와 지체구조의 특성을 고려하여 4개의 지진구(seismic province)를 설정하였다. 각 지진구에서 최대 잠재 지진결정은 Gumbel의 최대치 이론을 이용하였다 제 1수정 점근 함수 분포에서 유한 상한 값(finte upper boundary) 의 존재는 각 지진구에서 발생할 최대 잠재 지진의 진원(source)이 유한하다는 사실과 잘 일치한다. 따라서 이를 근거로 각 지진구에서 10년 , 20년, 30년, 50년 이내에 2% 5% 10% 초과 확률을 갖는 최대 규모지진을 추정하였다 또한 각 지진구에서 유한 지진원은 과거에 발생했던 큰 규모의 특정 지진과 지진 지체구조 정보에 근거하여 결정하였다. 연구결과 조선시대(1392-1904) 의 지진위험도에서는 경주 울산지역과 서울과 평양지역을 따라 높은지반 가속도 값을 보이며 경주지역에서 0.24g의 최대 지반 가속도 값으로 나타났다 계기 지진목록(1905-1998)을 이용한 한반도의 지진 위험도에서는 경주, 울산, 대구 지역에서 0.10-0.12g 의 최대 지반가속도 값을 보였다. 그리고 계기 지진 목록(1905-1998) 만을 이용하여 작성한 서울.경기 지역의 지진 위험도에서는 김포, 잠실 , 성남 지역의 한강을 따라 분포하는 충적층과 강남지역의 지반 운동이 한강 이북의 대보 화강암 지역에 비해 비교적 높은 0.09-0.10g의 지반 가속도를 보이는 것이 특징이다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.5
• /
• pp.585-596
• /
• 2006

This study focuses on the seismic behavior of 3-, 9-, and 20-story steel moment resisting frame (MRF) structures designed in accordance with the 2000 International Building Code using different Response Modification factors (R factors), i.e., 8, 9, 10, 11, and 12. For a detailed case study, 30 different structures were evaluated for 20 ground motions representing the hazard level, which is equal to a 2% probability in 50 years (2% in 50 years). The results showed that the current R factors provide conservative designs for the 3- and 9-story buildings for the Collapse Prevention performance objective. the 20-story buildings, which were designed without using the minimum requirement of spectral acceleration CS prescribed in IBC 2000, did not satisfy the seismic performance for Collapse Prevention performance.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.5
• /
• pp.47-56
• /
• 2008

This study was performed to evaluate the effect of Response modification factors (R-factor) in 3-, 9- and 20- story steel Moment Resisting Frame (MRF) buildings. Each structure was designed using a R-factor of 8, as tabulated in the 2000 International Building Code provision (IBC 2000) and Korea Building Code (KBC) 2008. In order to evaluate the maximum and minimum performance expected for such structures, an upper bound and lower bound design were adopted for each model. Next, each analytical model was designed using different R-factors (8, 9, 10, 11, 12) and four different structural periods with the original fundamental period. For a detailed case study, a total of 150 analytical models were subjected to 20 ground motions representing a hazard level with a 2% probability of being exceeded in 50 years. In order to evaluate the performance of the structures, static push-over and non-linear time history analysis (NTHA) were performed, and displacement ductility demand was investigated to consider the ductility capacity of the structures. The results show that the dynamic behaviors for the 3- and 9-story buildings are relatively stable and conservative, while the 20-story buildings show a large displacement ductility demand due to dynamic instability factors. (e.g. P-delta effect and high mode effect)

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.19-27
• /
• 2001

Seismic parameters fur computation of ground motions in Southern Korea are obtained from recently recorded data, and site-independent regional and site-dependent local strong ground motions are predicted using efficient computational techniques. For the computation of ground motions, we devised an efficient procedure to compute site-independent $x_{q}$ and dependent $x_{s}$ values separately. The first step of this procedure is to use the coda normalization method far computation of site independent Q or corresponding $x_{q}$ value. The next step is the computation of $x_{s}$, values fur each site separately using the given $x_{q}$ value. For computation of ground motions the empirical Green's function (EGF) is modified to account fur the depth and distance variations of subevents on a finite fault plane using the theoritical Green's function. It is computed using wavenumber integration technique in layered media. The site dependent ground motions at seismic stations in southeastern local area were properly simulated using the modified empirical Green's function method in layered medium. The proposed method and procedures fur estimation of site dependent seismic parameters and ground motions could be efficiently used in the low and moderate seismicity regions.ons.s.ons.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.4
• /
• pp.23-29
• /
• 2019

Heavy rainfall is in causing debris flow by recent climate change and causes much damage in the downstream. The debris flow from the mountainous area runs to the downstream, repeating sedimentation and erosion, and appears as a fluidized soil-water mixture. Continuity equation and momentum equation were applied to analyze the debris flow with strong mobility, and the sedimentation and erosion velocity with fine particle fractions were also applied. This study is to analyze the behavior of debris flow at the downstream end for the variation of the amount of sediments can occur in the upstream of the mountain. Analysis of sediment volume concentration at the downstream end of the channel due to the variance of the length of pavement of the granulated soils resulted in the higher the supply flow discharge and the longer the length of pavement, the greater the difference in the level of sediment concentration and the earlier the point of occurrence of the inflection point. The results of this study will provide good information for determining the erosion-sedimentation velocity rate which can detect erosion and sedimentation on steep slopes.

• Journal of the Korean Geographical Society
• /
• v.43 no.3
• /
• pp.276-295
• /
• 2008

Recent disputes on mountain ranges in Korea have partially been derived from the discordance of the spatial distribution and the extent of mountain ranges presented by different researchers and school textbooks. The lack of consensus on the definition and genesis of mountain ranges adds further confusion. In order to overcome these problems, it is necessary to provide genetically classified mountain range maps for different usages, map scales and educational purposes. This paper first argues that mountain ranges and mountain ridges should separately be used as different conceptual frameworks to explain complex spatial distribution of mountains in Korea. The new mountain range map (sanmaekdo) proposed in this research puts strong emphasis on tectonic movement and denudational processes to explain the spatial distribution of mountains. The new mountain range map has 15 mountain ranges (sanmaek: in total, which are further divided into 7 primary and 8 secondary mountain ranges. The new mountain range map eliminates Jeogyuryeongsanmaek, Myohyangsanmaek, Myeoraksanmaek, and Masingnyeongsanmaek from the existing map, since these have a vague definition and obscure spatial distribution. On the contrary, few new primary mountain ranges (Gilju-Myeongcheonsanmaek, Yangsansanmaek, Jirisanmaek) and secondary mountain ranges (Wolchulsanmaek and Buksubaeksanmaek) are added to the new mountain range map. Other mountain ranges also show a large difference both in their spatial distribution and the extent of mountain ranges, compared with the previous map. This is especially the case for Nangnimsanmaek, Hamgyeongsanmaek, Taebaeksanmaek, and Sobaeksanmaek. A few new names are also assigned to Macheollyeongsanmaek (Baekdusanmaek), Gwangjusanmaek (Hwaaksanmaek), Charyeongsanmaek (Chiaksanmaek), and Horyeongsanmaek (Naejangsanmaek), even though they show similar spatial distribution patterns with the ones in the existing map.