• Applied Biological Chemistry
• /
• v.44 no.1
• /
• pp.7-11
• /
• 2001

The distribution of procymidone in a small vinyl house containing cucumber plants or mimic plants was investigated after application of smoke generator. The deposition of procymidone on glass plate and filter paper was significantly similar to that on cucumber leaves, so that glass plate and filter paper could be substituted for cucumber leaves on deposition studies. The deposition of procymidone was proportional to the horizontally projected area of surface; the deposition on the horizontal surface was maximal, and the deposition was minimal for the perpendicular surface. The amount of deposition on the backside of leaf was less than 5% compared to that on the horizontal surface of leaf. The height of leaf from the floor was not a significant factor influencing on the deposition of procymidone whether leaves were overlapped or not. However, the deposition of procymidone on the overlapped leaves was relatively less than that on the unoverlapped leaves. And the deposition difference depending on the distance between leaves was not observable. Overall, the deposition of procymidone was proportionally increased with the application rate of smoke generator, but the deposition was inversely related to the sum of the total horizontal leaf area of mimic plants and the surface area of floor.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.194-200
• /
• 2017

This study aimed to determine the suitable of harvest time on the growth and quality of baby leafy vegetables (Agastsche rugosa O. Kuntze and Lepidium sativum L.) grown on rice seedling tray in a six-layered bench system at 30cm intervals in order to exploit the space during rice growing off-season. Seedlings were grown on the rice seedling tray for 10 days after sowing with coir substrate supplied with nutrient solution at EC $1.5dS{\cdot}m^{-1}$ every 2 days prior to placing the tray on the bench, which were at $1^{st}$ (Low) layer above 20cm and $6^{th}$ (High) layer above 170cm apart from the ground. Growth and phytochemical contents were measured at 7-day and 14-day harvest time. During the culture periods, daily average of integrated solar radiation and temperature were $9.3{\sim}9.6MJ{\cdot}m^{-2}$, $27.5^{\circ}C$ in the High layer and $5.1{\sim}6.2MJ{\cdot}m^{-2}$ in average, and $26.5{\sim}26.6^{\circ}C$ in the Low layer, respectively. For A. rugosa, the highest growth was observed in the Low layer bench at a 14-day harvest time, while their plant height in the High layer was shorter and the leaf number was lower. For L. sativum, the plant height, leaf length and width, leaf number and fresh weight were higher in the Low layer. For A. rugosa, a high yield was observed with the increase in integrated temperature and integrated solar radiation, while a higher yield of L. sativum was found with the increase in integrated temperature, but not with integrated solar radiation. For A. rugosa, both polyphenol and anthocyanin contents were higher in the High layer at a 14-day harvest time. For L. sativum, polyphenol contents were higher in the High layer, whereas no significant difference in anthocyanin and flavonoid contents was observed depending on the layer and harvest time. The highest chlorophyll content showed in Low layer at a 7-day harvest time in both A. rugose and L. sativum. All of the results suggest that in terms of growth and quality, it may be better growing in the high layer for 14 days after seedling in A. rugosa, and low layer for 7 days in L. sativum.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.286-292
• /
• 2019

This study aimed to investigate the suitable of layer on growth of six baby leaf vegetables using existing facilities and equipment in rice seedling nursery. Three kinds of Lactuca(lettuce 'Jinppallola' and 'Romain white', and indian lettuce), two of Brassica(tatsoi and red tatsoi) and amaranth were used as the materials. After sowing, the rice seedling tray was placed in multi bench system($L120{\times}W60{\times}H195cm$, 10th floor), which were low(1st) layer above 15cm, middle(4th) layer above 115cm and high(7th) layer above 175cm apart from ground. Irrigation was sprayed 2~3 times a day using a automatic irrigation system. The growth characteristics and leaf color were investigated when leaf vegetables were reached the optimum size(within 10cm of plant height). During the culture periods(29th Jun.~31th Jul. 2017), daytime average temperature was $27.4{\sim}28.3^{\circ}C$ regardless of layers but solar irradiance was higher in the high-layer than low and middle-layer of 37% and 22%, respectively. The leaf length, leaf width and number of leaves in middle and high-layer have a tendency to increase but, fresh weight was different according to the layer. When the correlation between accumulation radiation and growth was analyzed, all of growth factor of Amaranth showed a high correlation and other cultivars showed correlation with each growth factors. As a result, It is suitable that amaranth and red tatsoi for high-layer, Indian lettuce and tatsoi for middle and high-layer and 'Romain white' for middle-layer. The growth of red lettuce 'Jinppallola' was good at low layer, but leaf color expression was poor. So the high layer is suitable for 'Jinppallola'.

• Journal of Life Science
• /
• v.28 no.3
• /
• pp.357-360
• /
• 2018

This study developed a method to minimize rice damages and enhance timely control by accurately classifying Whitebacked Planthopper (WBPH). The body size of the 1st-3rd instar was 1.5-2 mm, and the body size of the 4-5 instar was 2.5-3.5 mm. In the third instar, the ratio of the front wing bud and the back wing-bud was 1:1. The fourth instar occupied 3/4 of the front wing-bud, and the 5th instar showed that the front wing-bud covers the back wing-bud. It was confirmed that the 1st instar does not have a sensory plate, the 2nd instar has 2-3, the 3rd instar has 4-5, the 4th instar has 6-9, the 5th instar has 10-15, and the adult instar has 15-20 sensory plates. The female spawning organs were reddish when the spawning horn was inserted. WBPH showed that the larvae of 2-3 larvae most actively feed on rice, and the damaged area was the stem of rice near the ground. In addition, a partial black wound was observed after the feeding. WBPH-susceptible 'Chucheong' was yellowish, and early growth was slower than that of 'Cheongcheong', which was resistant; moreover, a difference between susceptibility and resistance was observed. The identification of the number of such wounds in the bioassay will be a better basis for understanding the difference in susceptibility between WBPH strains and cultivars. These results will be used as basic data for cultivating the WBPH-resistant varieties of rice.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.1
• /
• pp.4011-4020
• /
• 1976

본논문은 북해도대학심사학위논문으로 총면수 143면인 영문으로 되어 있고 도 48, 표 7, 문묵 66부도, 부표 20면이있음. Plow는 옛부터 발달한 농구이기 때문에 많은 연구가 행하여졌지만 복잡한 물리성을 가준 토양을 대상으로 하는 기계이기 때문에 미해결의 문제도 적지않다. 이견인저항에 대하여 토양의 종류 및 조건을 변경하면서 실제의 포장에서 조직적으로 행한 실험은 극히 적고, 하물며 우리나라의 쟁기에 관한 연구는 거의없다. 본논문은 쟁기의 특징을 구명하고, 그의 개량, 발달에 기여하기 위한 기기자료를 획득코저 실시한 것이다. 1. 쟁기와 플라우의 구조 및 그의 차이 특징을 명백히하고 이체에 걸리는 각종의 저항의 내용 또는 그 비율등에 대하여 과거의 연구성과를 소개하였다. 2. 발달사 ; 플라우는 B.C. 2000년경에 녹각, 목지의 인력용의 경운용구에서 발달하고, 동양이도 기원은 대체로 같고 발달과정이 다를 뿐이다. 쟁기는 양자강연안에 기원을 가진 지나이가 신라와 백제에 도입되여 차차 발달하고, 지역적인 특징을 가지게 되었다. 3. 본장은 쟁기의 견인력에 관한 이론적해석을하고, 쟁기의 진행에 의해 층상으로 전단되는 전단저항을 구하고 쟁기의 표면 및 지측판과 토양과의 마찰력, 그리고 토양의 이동의 관성력을 쟁기의 견인저항에 관련되는 주요한 "힘"으로 생각하고 진행방면, 수직방면의 힘의 성분의 평형을 고려하여 식 10. 12를 유도 하였다. 4. 본장에서는 실험계획, 방법 공시기, 공시포장등을 기록하고, 축력용의 쟁기와 플라우를 사용하여 전지 4종 답 2종의 포장에서 실험하는데 견인력계와 자동경심측정기를 사용하였다. 5. 실험결과 및 고찰; 경심과 견인저항 Dp와의 관계는 식 10. 12와 갈이 표시되고, 실제의 제치를 대입하여 이론식을 유도하였으니 직선에 가까운 관계가 있고, 실험결과는 조금 곡선에 가까워졌다. 그리고, 토양의 물리성이 견인력Dp에의 영향을 세밀히 검토하였다. 쟁기의 견인비저항에 있어서도 식 12에서 {{{{K=AT+ { B} over {T } +C}}}}로 표시할수 있기 때문에 최소치를 표시하는 경심이 존재하고 이값은 쟁기나 플라우폭의{{{{ { 1} over {2 } }}}} 즉 10m정도이고 쟁기는 비저항이 0.llkg/$\textrm{cm}^2$에서 0.39kg/$\textrm{cm}^2$이였다. 그러나 이 비저항도 토양의 물리성이 많은 영향을 미치고 있다. 6. 요약 및 결론 ; 이상의 장에서 검토 고찰한 결과만을 기재하고 플라우는 쟁기에 비해 견인저항 및 비저항이 논에서나 밭에서 대로 나타난 것이 특이하다. 이상의 내용을 지면관계로 3회에 거쳐 요약 발표합니다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.4
• /
• pp.33-37
• /
• 2009

Purpose: To examine the coloring condition of titanium spectacle frames with various colors by using anodization method. Methods: We made an anodization coater. Platinum plate with $3{\times}3cm^2$ was used for a cathode and titanium spectacle frame specimens was mounted on an anode in an electrolyte. An electric source device were designed to supply steady state current. The color of the coated spectacle frame specimens were measured by a spectrophotometer equipped with an integrating sphere. We use CIE $L^*a^*b$ color system as chromaticity coordinates. Results: The thickness of $TiO_2$ of titanium spectacle frame specimens was varied as controlling current flow time for electrodes. The specimens with various kinds of color as a walnut, a yellow brown, a navy blue, a blue, a light blue, a mung bean, a yellowish green, a light purple, a purple, a flower pink, a bluish green, an emerald, and a green color etc. were obtained. The values of CIE $L^*a^*b^*$ for these specimens were measured and analyzed to be changed clockwise in chromaticity coordinates as the thickness of $TiO_2$ increases. Conclusions: We identified the coloring mechanism by anodization method in titanium spectacle frame specimens.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.4
• /
• pp.15-28
• /
• 2013

This paper was made on the basis of geotourism to explain morphological characteristics of Patagonia and Atacama region in the Andes through 10-day fieldwork. The Patagonian landscape was focused on the Torres del Paine National Park, Chile and the Los Glacier National Park, Argentina; on the other hand, the Atacama morphological landscape was investigated around the San Pedro de Atacama. Many geomorphological features such as uplift, semiarid and glacier landscapes can be found in Patagonia, so it is strongly recommended to have an opportunity to enjoy these landforms by geotourism. Massive intrusive rock bodies of granite can be shown in those two National Parks declared a Biosphere Reserve by UNESCO. And, the Atacama Desert located on the forearc depression in the Andes, Chile has also many geomorphological destinations of arid and volcanic landforms; badland, pediplain, pediment, salt lake and geyser. Especially, huge pediplain is one of the greatest view points in the Atacama Desert. Patagonia and Atacama are the best geographical tourism sites to know diverse tectonic landforms made by the conflict between South American and Pacific plates.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.7
• /
• pp.61-73
• /
• 2008

Piles of a bridge pier are connected with the column through the pile cap (footing). Behavior of the pile foundation can be different according to the connection method between piles and the pile cap. Connection methods between pile heads and the pile cap are divided into two groups : rigid connections and hinge connections. Domestic design code has been specified to use rigid connection method for the highway bridge. In the rigid connection method, maximum bending moment of a pile occurs at the pile head and this helps the pile to prevent the excessive displacement. Rigid methods are also good to improve the seismic performance. However, some specifications prescribe that conservative results through investigations of both the fixed-head condition and the free-head condition should be reflected in the design. This statement may induce an over-estimated design for the bridge which has high-quality structures with casing covered drilled shafts and the PC-house contained pile cap. Because the assumption of free-head conditions (hinge connections) is unreal for the elevated pile cap system with multiple piles of the long span sea-crossing bridges. On the other hand, elastic displacement method to evaluate the pile reactions under the pile cap is not suitable for this type of bridges due to impractical assumptions. So, full modeling techniques which analyze the superstructure and the substructure simultaneously should be performed. Loads and stress state of the large diameter drilled shaft and the pile cap for Incheon Bridge which will be the longest bridge of Korea were investigated through the full modeling for rigid connection conditions.