• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.21-26
• /
• 1999

The technique for calibrating standard particles larger than 1 $\mu$m by using an optical array sizing method has been established. The system consists of an optical microscope with transmission light source, a CCD camera, and a computer equipped with a frame grabber. The center distance between two spheres located at both ends of a row which consists of N spheres is measured in terms of pixel numbers, and divided by (N-1) to obtain the average pixel numbers per particle. This value is multiplied by length conversion constant, which has been determined in advance, to obtain the mean diameter of polystylene spheres. The length conversion constant is found from the microscopic image of calibrated standard stage micrometer plate. In order to reduce error in finding center positions of the scale and particles in the image, a software filter which dilates bright (or dark) object has been used. Spheres having nominal size of 1, 2, 3, 5, and 10$\mu$m were measured, and the maximum deviation of the measured mean diameter valus from their certified values was 0.7%. Standard particles which is larger than 1 $\mu$m can be calibrated by this method with measuredment uncertainy (k=2) lees than 1.53%.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.1_2
• /
• pp.78-85
• /
• 2004

Given a set S of n points in the plane, a minimum-diameter spanning tree(MDST) for the set might have a degree up to n-1. This might cause the degradation of the network performance because the node with high degree should handle much more requests than others relatively. Thus it is important to construct a spanning tree network with small degree and diameter. This paper presents an algorithm to construct a spanning tree for S satisfying the following four conditions: (1) the degree is controled as an input, (2) the tree diameter is no more than constant times the diameter of MDST, (3) the tree is monotone (even if arbitrary point is fixed as a root of the tree) in the sense that the Euclidean distance from the root to any node on the path to any leaf node is not decreasing, and (4) there are no crossings between edges of the tree. The monotone property will play a role as an aesthetic criterion in visualizing the tree in the plane.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.161-170
• /
• 2013

In this paper, numerical pile segment analysis is conducted with an advanced soil elastoplastic model to investigate the diameter effects on skin friction behaviour of a drilled shaft in sand. Ultimate skin friction and 't-z' behavior from the pile segment analyses for drilled shafts show good agreement with those from design methods. Higher ultimate skin friction for the smaller diameter pile is related to the greater increase in the effective radial stress at the interface due to the localized dilation at and near the pile interface. Stiffer t-z curve for the smaller diameter pile is related to the early occurrence of three shear stages (early, dilation, constant volume shear stages). The diameter effects on ultimate skin friction of drilled shafts are more prominent for denser sand and lower confining pressure.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.177-181
• /
• 2005

Although there are many ways to measure the diameter of a cylindrical object, in this study, the diameter of a cylindrical objects were measured by the geometric optical method and interference-diffraction method which are two kinds of tipical non-contact methods. In geometric optical method, the curved laser beam is formed on the cylindrical surface by spreading the inclined laser beam using the cylindrical lens. The curve is captured by CCD camera and the diameter is calculated by geometry. And the interference and diffraction patterns of investigated cylindrical objects are analyzed in interference-diffraction method. In this study, the cylindrical objects, whose diameters are $0.05\;mm\;\~\;100.50\;mm$ were measured by the geometric optical method and interference-diffraction method. The results show that in each method, the relative errors of the measurement are within $2\%$ and $1\%$, respectively and these non-contact methods can be applied in the quick measurement of many objects.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.79-81
• /
• 2018

혈관내 초음파(Intravascular Ultrasound, IVUS)는 혈관 내벽의 단면을 보여주는 검사 방법으로 관상 동맥 내의 내강, 죽상 경화반, 그리고 혈관벽의 변화에 관한 직접적이고 구체적인 정보를 제공한다. 본 논문에서는 IVUS 영상에서 내막과 외막을 추출하고 각 막의 지름을 자동적으로 추출하는 방법을 제안한다. 제안된 방법은 IVUS 영상에 Histogram Equalization 기법을 적용하여 명암 대비를 강조한 후에 퍼지 이진화 기법과 평균 이진화 기법을 각각 적용하여 내막과 외막을 추출하기 위해 이진화한다. 이진화된 내막과 외막의 각 영역 중에서 혈관내 초음파 영상 중심에서 가장 큰 영역의 정보를 이용하여 라벨링 기법을 적용하여 내막과 외막 영역을 추출하고 각 막의 지름을 계산한다. 제안된 방법을 IVUS 영상을 대상으로 실험한 결과, 내막과 외막의 지름이 비교적 정확히 추출되는 것을 실험을 통하여 확인하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.8
• /
• pp.667-673
• /
• 2001

As an alternative cooling method to reduce environmental hazard, vortex tubes have been studied for energy separation into cold and hot streams. Hence, the experiments were carried out systematically to find the best ratio of vortex chamber diameter to tube diameter. Also, the work was don to investigate how inlet pressure and geometric ratios of vortex tube affected temperature differences at tow needs as ell as cooling capacity and cooling efficiency. The result showed that the maximum temperature differences at the both ends and the maximum cooling efficiency were obtained when the ratio of vortex chamber diameter was about 1.45, while the inlet pressure ws not higher than 0.7 MPa.

• The KIPS Transactions:PartA
• /
• v.18A no.5
• /
• pp.205-214
• /
• 2011

We propose a new interconnection network, called Twisted cube torus(TT) network based on well-known 3-dimensional twisted cube. Twisted cube torus network has smaller diameter and improved network cost than honeycomb torus with the same number of nodes. In this paper, we propose routing algorithm of Twisted cube torus network and analyze its diameter, network cost, bisection width and hamiltonian cycle.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.589-591
• /
• 2001

본 논문에서는 재귀원형군 G(2$^{m}$ , 2$^{k}$ )에서 노드에 고장이 났을 경우 임의의 두 노드사이의 고장이 없는 최단경로의 길이를 분석한다. m > k+1인 G(2$^{m}$ , 2$^{k}$ )에서 m = nk+r이라 하자. 여기서 n $\geq$ 이고, 1$\leq$ r$\leq$ k이다. m > k+1인 G(2$^{m}$ , 2$^{k}$ )에서 임의의 연결도-1개 이하의 노드에 고장이 있을 경우, 모든 두 노드 사이의 고장이 없는 가장 짧은 경로들의 길이의 최대값, 즉 G(2$^{m}$ , 2$^{k}$ )의 고장지름은 n이 짝수이면 di $a_{m, k}$+2 이하이고, n이 흘수이면 di $a_{m, k}$+3 이하이다. 여기서 di $a_{m, k}$는 G(2$^{m}$ , 2$^{k}$ )의 지름이다.

• Sijohaknonchong
• /
• v.24
• /
• pp.223-258
• /
• 2006

This Research is about the classification of 'Sijochang', or the Korean ode narrative song, in terms of music. Contrary to the literature classification by the number of letters, sijochang varies with the melody. Literally, the classification is generally made as Dansijo(or short ode) Jungsijo(or medium ode) and Jangsijo(or lengthy ode) but the sijochang is normally divided into 'Pyongsijo' (or plain ode), 'Jirumsijo and Saseolsijo'. As while the same Sijochang is called under the different names, the different type of sijochang is also called as the same name, it needs the discussion about its name. Some Korean classical musicians have attempted to define it but they are trying to do it without the specific reasoning about its concept. As a result, the systematic research is required. This study designs to streamline the currently confusing and complex names and set up the sijo's classification system. After reviewing the ancient music note, current sijo score and the traditional theory, I largely classified it into 3 types: Pyongsijo, Jirumsijo and Saseolsijo. And then, 1 analyzed on to which type the sijochang which is presently called belongs, based on several principles. The 67 names of the sijo which I have investigated about are classified with them sharpy reduced into 16. Among the current sijo names. there are some which are of same type yet of different phonetics and there are others which are of different phonetics yet of same type. To avoid such complex and troublesome names, I have orchestrated them as follows, taking the literary and music concept into account. 1) Pyongsijo type : Pyongsijo, Joongherisijo, Wujosijo and Payeonkok 2) Jirumsijo type: Jirumsiro, Namchangjirumsijo(it refers to Jirumsijo sung by male ), Yeochangjirumsijo (it refers to Jirumsijo sung by female), Banjirumsijo(it refers to half the Jiumsiro), Onjirumsijo (it refers to the whole Jirumsijo), Wujojr\irumsijo, Saseoljirumsijo and Whimorisijo) 3) Saseolsijo type : Saseolsijo, Bansaseolsijo(it refers to half the Saseolsijo, Gaksijo or Pyongsiro There are still lots of things to musically streamline, in the fields of disposition of Sijo letters, its form, musical scale and influences on other genre. etc. and as such. the accumulation of theory on them is urgently required. Those musical elements need an in-depth review and study by the experts and the Korean traditional musicians. Later research is expected to play a role of exploring it.

• KOREAN POULTRY JOURNAL
• /
• v.14 s.151
• /
• pp.51-53
• /
• 1982