• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.47-54
• /
• 2015

This research was conducted to investigate the changes in moisture retention capacities of expanded rice-hull (ERH)-based root media and their influences on the growth of mother and daughter plants in vegetative propagation of 'Seolhyang' strawberry. The proportion of water at the container capacity of ERH medium was in the range of 20 to 23%. This range was lower than the 60 to 66% of strawberry-specialized medium, the 30 to 34% of soil mother material (SMM) and the 30 to 35% of loamy sand. The moisture content of ERH was reduced to 10 to 12% at 8 hours after irrigation, and there were large variations among replications of ERH medium. Among four kinds of root media formulated to contain ERH, the medium of ERH + coir dust (CD) (55 + 45%, v/v) had 26.5 and 32.5% water contents at 20 and 40 days after irrigation to daughter plants, respectively. The m edia o f ERH + sandy loam (S L) and E RH + S MM showed similar trends i n moisture r etention. The pH and EC i n the all root media tested were in the range of 6.7 to 7.1 and 0.03 to $0.08dS{\cdot}m^{-1}$, respectively. The pHs and ECs measured at 20 and 40 days after irrigation were not significantly different in each root medium. Among the root media formulated to contain ERH, the growth of daughter plants was the highest in the treatment of ERH + SL (55 + 45%, v/v). As the blending rate of coir dust was elevated in the ERH + CD media, moisture retention capacity increased gradually, but the growth of daughter plants became worse even though the medium showed higher moisture retention capacity than other root media tested. The growth of roots and aboveground tissues of daughter plants deteriorated in the root media formulated by blending ERH + perlite (PE) at various ratios. The results of this research suggest the optimum formulations of root media and management of moisture content in raising of strawberry daughter plants when ERH is a component of root media.

• Horticultural Science & Technology
• /
• v.29 no.1
• /
• pp.23-28
• /
• 2011

Experiments were conducted to investigate the optimum concentration of the nutrient solution in strawberry 'Sulhyang' with hydroponics in relationship between root activity and nutrient concentrations. Nutrient solutions for strawberry, made by Yamazaki, were supplied EC 0.5, 1.0, 2.0 $dS{\cdot}m^{-1}$ during experiment period. Growth of shoot and root of strawberries grown in visible plastic pot was observed during experiment. Petiole length was longest in plants grown in EC 1.0 $dS{\cdot}m^{-1}$, followed by 2.0 and 0.5 $dS{\cdot}m^{-1}$. Leaf width was longest in plants grown in EC 1.0 $dS{\cdot}m^{-1}$, followed by 0.5 and 2.0 $dS{\cdot}m^{-1}$. Fruit length, fruit diameter, fruit weight and yield were higher in EC 0.5 and 1.0 $dS{\cdot}m^{-1}$ than 2.0 $dS{\cdot}m^{-1}$ treatment but, soluble solids of the fruit did not show statistical differences among treatments. Shoot dry weight was heaviest in EC 1.0 $dS{\cdot}m^{-1}$, followed by 0.5 and 2.0 $dS{\cdot}m^{-1}$. Root dry weight was heavier in EC 0.5 and 1.0 $dS{\cdot}m^{-1}$ but significantly light in 2.0 $dS{\cdot}m^{-1}$. pH of the drainage solution was elevated in low nutrient concentration and lowered in high concentration. Also root activity was high in low nutrient concentration and low in high concentration. As a result, the optimum EC for strawberry 'Sulhyang' was EC 1.0 $dS{\cdot}m^{-1}$ in this experiment. It was confirmed that there was high relationship between root activity and pH of drainage solution. This result will be utilized as an indicator for strawberry hydroponics.

• Horticultural Science & Technology
• /
• v.29 no.1
• /
• pp.16-22
• /
• 2011

In developing soil wetting agent using polyoxyethylene nonylphenyl ether (PNE) and polyoxyethylene castor oil (1:1; v/v), the effect of application rates on changes in concentration of PNE, initial wetting of peatmoss + perlite (7:3) medium, and growth of hot pepper (Capsicum annuum L. 'Knockwang') plug seedlings were investigated. The elevation of application rates of wetting agent increased the amount of water retained by the root media. The treatment of 2.5 $mL{\cdot}L^{-1}$ showed similar water retention to + control ($AquaGro^L$ 3.0 $mL{\cdot}L^{-1}$). Most of the liquid wetting agent (LWA) incorporated during the medium formulation leached out in the first and second irrigation, then it decreased gradually until 10 times in irrigation. In investigation of the influence of LWA on position of water infiltrating into root media, the vertical water movements in treatments of 0.5, 1.0, and 1.5 $mL{\cdot}L^{-1}$ were much faster than those in 0.0 $mL{\cdot}L^{-1}$ (-control), but relative speed of water movement decreased by the elevation in application rate of LWA to 2.0 or 2.5 $mL{\cdot}L^{-1}$. The evaporative water loss of root media that to contained various rate of LWA and irrigated to reach container capacity was the fastest in -control among the treatments and it delayed as the application rate of LWA was elevated. The plant height of 22.2 cm in 0.5 $mL{\cdot}L^{-1}$ and stem diameter of 3.26 mm in 1.0 $mL{\cdot}L^{-1}$ were the highest among the treatments tested. The treatment of 1.0 $mL{\cdot}L^{-1}$ also had the heaviest fresh and dry weights such among treatments tested as 3.08 g and 0.861 g per plant, respectively. The elevated application rate over than 1.5 $mL{\cdot}L^{-1}$ resulted in decreased seedling growth. The results mentioned above indicate that optimum application rate of LWA is 1.0 $mL{\cdot}L^{-1}$.

• Korean Journal of Food Science and Technology
• /
• v.12 no.2
• /
• pp.97-102
• /
• 1980

Cladosporium fulvum, Aspergillus ochraceus, Aspergillus terreus and N-1 (unidentified species) were cultured on the artificial media containing sucrose as a carbon source at 20, 25 and $30^{\circ}C$ for 10 to 12 days. The lipids in the felts were extracted with chloroform-methanol mixture and the class composition and fatty acids of the lipid were determined. The summarized results are as follows 1. The average felts produced by each species per 100 ml of media were $3.82{\pm}0.30g$ for Cl. fulvum, $2.62{\pm}0.23g$ for Asp. ochraceus, $4.24{\pm}0.25g$ for Asp. terreus and $4.62{\pm}0.10g$ for N-1. Their crude fat contents $27.5{\pm}1.61%,\;50.47{\pm}1.00%,\;46.6{\pm}1.59%$ and 33.78 % and the fat coefficient 6.92, 8.88, 13.01 and 10.28, respectively. 2. The lipids produced by these species were mainly composed of triglyceride and the next free fatty acid in Cl. fulvum and N-1 and phospholipid Asp. ochraceus and Asp. terreus. 3. The major fatty acids of the lipids were in order of oleic, palmitic, linoleic and stearic acids in Asp. ochraceus, Asp. terreus and Cl. fulvum and linoleic, palmitic, oleic and stearic acid in N-1. The total percentage contents of these major fatty acids were over 98 % the former and over 95 % the latter. 4. The constituent fatty acids of the lipid were changed depending on the incubation temperature but hardly found a certain tendency except linoleic acid which was higher at lower temperature. 5. The total percentages of unsaturated fatty acids in the lipids were $50{\sim}60%$ and comparatively higher at lower incubation temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.228-234
• /
• 2016

The aim of this study was to develop pharmaceutical dosage forms with a bi-phasic drug using a double extrusion approach. Hot melt extrusion was performed using a co-rotating twin-screw extruder. The. 1st melt extrusion was performed using polymer with a relatively higher Tg, such as HPMC and the 2nd melt extrudate was obtained using the 1st extrudate and polymers with a lower Tg, such as HPMC-AS and PEO. In addition, the formulation with all the content in the same proportion as the double extudate was produced using single extrusion for comparison. Physical characterization was performed on the formulations employing differential scanning calorimetry (DSC). In vitro release tests were studied using a USP Type-I apparatus at $37{\pm}0.5^{\circ}C$ and 100 rpm. The similarity factor (f2) was also used to check the difference statistically. The DSC results indicated that the crystallinity of ibuprofen was changed to an amorphous state after extrusion in both double and single melt extrusion. Double melt extrudate with ibuprofen showed the desired release in acidic media (pH 1.2) in the first two hours and basic (pH 6.8) during six hours. Double melt extrudate with glimepiride showed faster release in 60 min of over 80%, whereas the single extrudate with glimepiride showed retarded release due to the interaction with HPMC. The similarity factor(f2) value was 28.5, which demonstrates that there were different drug release behavior between the double and single extrusion. Consequently, the double melt extrudated formulation was robust and gave the desired drug release pattern.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.149-155
• /
• 2015

Tooth implant is located in oral cavity and affects neck, skull base, and facail image. These magnetic inhomogeneities are usually frequency encoding direction which cause artifacts due to change of signal strength and geometric distortion. First, to evaluate signal to noise ratio (SNR) of magnetic resonance image caused by tooth implant this study uses meat phantom which is similar to human body and is consisted with fat, muscle, and water to measure signal to noise ratio. Second, signal to noise ratio by using custom-made fixed phantom is measured, and then signal to noise ratio size of different tooth implant types is compared and analyzed. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for meat phantom were 2.76, 2.22, 1.88, and 1.57 on T1 SE, 1.88, 1.78, 1.65, and 1.79 on T2 FLAIR, 2.28, 2.25, 2.88, and 2.05 on T2 FSE, and 2.74, 1.94, 1.67, and 1.48 on T2 GRE. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for fixed water phantom were 1.2, 1.06, 1.12, and 1.22 on DWI, 1.93, 1.87, 1.93, and 2.06 T1 SE, 1.83, 1.76, 1.82, and 1.92 on T2 FLAIR, 1.85, 1.79, 7.86, and 1.97 on T2 FSE, and 1.97, 1.93, 1.99, and 2.06 on T2 GRE. By considering through the results, patients and dentists need to consider some impacts from testing many aspects although their main purpose of having tooth implants is a dental restoration. Moreover, depending on the tooth implant characteristics of individual patients this study results can be used as baseline data when choosing test protocol.

• Journal of Nutrition and Health
• /
• v.44 no.1
• /
• pp.5-15
• /
• 2011

Although iron is an essential mineral, excess iron intake during pregnancy may increase oxidative stress in tissues. This study was conducted to investigate the effects of iron overload during pregnancy on iron status and oxidative stress in maternal rats. Ten week-old female Sprague-Dawley rats were mated with male rats. Non-pregnant (control) and pregnant rats were fed diets containing normal Fe (35 mg/kg diet), high Fe (350 mg/kg diet), or excess Fe (1,050 mg/kg diet) during pregnancy. Rats were sacrificed on pregnancy day 19. No significant difference in weight gain, diet intake, or litter size was observed according to iron intake levels. Furthermore, serum iron, hemoglobin, and hematocrit were not different among the rats administered the three levels of Fe both in the control and pregnant groups. However, the iron levels were lower in pregnant rats than those in the control. The liver and spleen iron contents increased significantly in the excess Fe group. An increase in liver ferritin levels with increasing iron intake was observed. Protein carbonyl content, as a marker of oxidative stress, increased significantly in liver with increasing iron intake but not malondialdehyde. Glutathione peroxidase activity in the liver of pregnant rats fed excess iron decreased significantly. Bcl-2 protein expression in the liver declined remarkably with increasing maternal iron intake in pregnant rats. Taken together, iron overload during pregnancy had little effect on hematology. However, the deposits of iron in the liver and the decline in antioxidant enzyme activity implied increased oxidative stress in tissues of the excess Fe group. These results suggest that excess iron intake during pregnancy increases oxidative stress in maternal tissues and may also affect fetal tissues.

• Journal of Distribution Science
• /
• v.7 no.4
• /
• pp.47-56
• /
• 2009

The purpose of this study is to present an alternative improving the efficient and reasonable of the physical distribution system management is influenced by many factors. Therefore, the study depends on the documentary method and survey method to achieve the purpose of this study. The major components of a physical distribution system are refers to as elements, include warehouse·storage system, transportation system, inventory system, physical distribution information system. The factors used in this study are ① factor of product(quality·A/S·added value of product·adaption of product·technical competitive power to other enterprises), ② factor of market(market channel·kinds of customer·physical distribution share), ③ factor of warehouse·storage(warehouse design·size·direction·storage ability·warehouse quality), ④ factor of transportation(promptness·reliability·responsibility·kinds of transportation·cooperation united transportation system·national transportation network), ⑤ factor of packaging (packaging design·material·educating program·pollution degree measure program), ⑥ factor of inventory(ordinary inventory criterion·consistence for inventories record), ⑦ factor of unloaded(unloaded machine·having machine ratio), ⑧ factor of information system (physical distribution quantity analysis·usable computer part), ⑨ factor of physical distribution cost(sales ratio to product) ⑩ factor of physical distribution system(physical distribution center etc). The implication of this study can be summarized as follows: ① In firms that have not adopted a systems integrative approach, physical distribution is a fragmented and often uncoordinated set of activities spread throughout various functions with function having its own set of priorities and measurements. ② The physical distribution is recognized as more an important strategic factor than a simple cost reduction factor, ③ It can be used a strategic competition tool to enterprise.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.6
• /
• pp.958-964
• /
• 2004

This study examined the effects of maternal calcium intake levels on mineral metabolism during pregnancy and lactation. Five week-old female Sprague-Dawley rats were fed normal Ca (NCa, 0.5%) and low Ca (LCa, 0.15%) diets for 5 weeks during preconception. The low Ca intake group was divided into three groups and fed low Ca (0.15%), normal Ca (0.5%) and high Ca (1.5%) diets for 6 weeks during pregnancy and lactation. All of the rats were mated with normal male rats. The control group was consistently fed a normal Ca diet for 11 weeks. Pups were adjusted to 10 per dam. After weaning, dams and their weaned rats were sacrificed. We measured total protein, albumin, alkaline phosphatase and mineral content in serum and weight, length, breaking force, ash and mineral content in bone and kidney. There was no significant difference in weight gain and food intake among the groups. Serum total protein and albumin were in the normal range but slightly decreased with a low Ca diet during preconception. Calcium supplementation above normal level increased bone weight, Ca content and breaking force in femur of maternal and their weaned rats. However, high maternal Ca intake significantly decreased Mg and Fe contents in maternal serum and bone and Mg and Zn contents in serum of weaned rats. Also, it induced Ca, P and Mg deposit in maternal kidney. Our experimental results suggest that Ca deficiency during preconception may deteriorate bone status of mother and their offsprings. Moreover, high Ca supplementation during pregnancy and lactation may lead to disturb mineral metabolism in bone and other tissues.

• Journal of Korean Home Economics Education Association
• /
• v.30 no.3
• /
• pp.43-66
• /
• 2018

The purpose of this study was to conduct the instruction for 'Family Life Planning' based on backward design and measured the learners' understanding and satisfaction for testing validity. In short, the result of this study are as follows: In this study, first of all, the students could explain significant concepts, knowledge, and principles for the planning of family life; they could interpret and apply them; they have perspectives on them; they could empathize them; and they could have self-knowledge. The students could also accomplish high achievements for important concepts related to the field of family life planning. In conclusion, this study showed that the developed instruction was very effective for the students to achieve fruitful results, accelerating the learners' persistent understanding. Second, the learners had high satisfaction on the instruction of Family Life Planning based on backward design with the average score of 3.68 out of the perfect score 4. The students could be satisfied with the developed instruction since they could have high interest in the class thanks to diverse learning materials, and they could take an active part in the learning tasks based on group activities and questions. Also they could apply the contents that they learned through task performances to new situation and context. Therefore, this study proved that the developed instruction enhanced the learners' satisfaction on class.