• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.277-283
• /
• 2011

In this study, engineering grade and high intensity reflective sheets were prepared with glass beads and their reflection performance and physical properties were investigated. The reflective sheets prepared by using glass beads are divided into enclosed or encapsulated lens type, depending on whether the glass beads are open in air or not. Because of an extra layer on the glass bead surface, the enclosed lens type reflective sheets show very little change in the properties by bad weather conditions, compared to encapsulated lens type reflective sheets. Optimization of the amount of glass beads on the surface was carried out, which determines the retroreflective properties. Enclosed and encapsulated lens type reflective sheets with various colors were prepared and their coefficients of retroreflection were determined. The encapsulated type reflective sheet with white color shows a coefficient of retroreflection of $210.4cd/1x{\cdot}m^2$, which is higher than the enclosed type ($74cd/1x{\cdot}m^2$). Effect of washing on the reflective property and adhesive power of the reflective sheets was investigated, and it is found that the number of glass beads decreased with washing and the aluminum layer deposited was damaged extensively in the encapsulated lens type reflective sheets.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.1
• /
• pp.69-76
• /
• 1991

A pot experiment was conducted to find out the effects of lime and phosphate application on the changes of number of soil microorganisms, indigenous Rhizobium japonicum, nodule formation, and ureide-and amide-N in leaf and stem exudate of soybean plant under uncultivated hillside red earth in very low pH value, organic matter, available phosphate, and cation exchange capacity. The results obtained were summarized as follows : 1. The plant height, stem length, root dry weight and nodule weight were significantly increased with the application of lime and phosphate application than that of control plot. 2. The concentration of amide-N in soybean plant at the 45 days after sowing was obtained as high in order of control>lime> lime+phosphate while the concentration was obtained in order of Iime+phosphate>lime> control at flowering stage 3. However, concentration of ureide-N in the soybean leaf at the 45 days after sowing was obtained as high in order of control>lime>lime+hosphate while reversed concentration was obtained in stem. 4. The number of soil microorgan isms were increased with increase of pH value, available phosphate and soil exchangeable cation. 5. Significantly negative high correlation were obtained with the concentration of Al, Fe in soil and the concentration of amide-and ureide-N in soybean plant at flowering stage while positive correlation was obtained with plant growth and the concentration of ureide-N.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.698-703
• /
• 2012

This survey was conducted to obtain basic data of the quality of groundwater for agriculture in Gyeongnam province. Groundwater samples from paddy 15, upland 15, and plastic film house 30 sites were collected on April, July, and October in every two years from 2002 to 2008. According to the result of water quality analysis, groundwater quality was suitable for irrigation purpose averagely. The $NO_3$-N contents by land use were in the order of plastic film house > upland > paddy field and its contents were 6.53, 4.80, and $3.68mg\;L^{-1}$, respectively. In annual changes of water quality, pH was no significant change in paddy, upland, and plastic film house by 6.6~6.9. EC was increased in upland and plastic film house in 2008 and majors factors were $NO_3$-N and $Cl^-$. In upland and plastic film house, $NO_3$-N contents were 4.72 and $6.52mg\;L^{-1}$ in 2002, respectively, whereas they were 5.63 and $8.70mg\;L^{-1}$ in 2008, respectively. Of the investigated sites, $NO_3$-N was exceeded water quality standards for agriculture by 3.3~15.0% in plastic film house and $Cl^-$ was exceeded water quality standards for agriculture by 2.2% in upland of 2004. The $NO_3$-N contents were decreased with well depth and their contents were $5.38mg\;L^{-1}$ from 3~10 m, $4.87mg\;L^{-1}$ from 10~20 m, and $2.58mg\;L^{-1}$ from above 30 m. The $NO_3$-N contents by soil texture were highest in sandy loam by $5.73mg\;L^{-1}$ and lowest in clay loam by $4.13mg\;L^{-1}$. The $NO_3$-N contents by crops category were in order of fruit vegetables > leaf vegetables > rice > fruits > beans, contents of fruit vegetables and leaf vegetables were 5.81 and $5.30mg\;L^{-1}$, respectively.

• Applied Biological Chemistry
• /
• v.19 no.1
• /
• pp.36-40
• /
• 1976

The mucilage of the root of Abelmoschus manihot, MEDIC is important for production of Korean traditional hand-made paper. This study was proceeded to detect the variation of the amount of free reducing sugars and of the viscosity in the mucilage. The results as follow. 1. The mucilage of the root of Abelmoschus manihot, MEDIC has contained some of free reducing sugars, 2. The viscosity of the mucilage isolated from the root decreases with time at the constant temperature, but the amount of reducing sugars show a little change. 3. The amount of the reducing sugars is not changed on the agitation. 4. When $1{\sim}2%$ ammonium sulfate solution is added, the viscosity of the mucilage decreases very gradually, and the amount of the free reducing sugars in the mucilage shows a little change.

• Korean Journal of Environment and Ecology
• /
• v.23 no.2
• /
• pp.208-219
• /
• 2009

This study is to establish a management method for conservation through comparison and analysis on vegetation structures of Pinus densiflora forest around Beopjusa area for past 17-year. The spatial range of the study was $3.6km^2$ from maintenance office to Beopjusa area. The analysis results of the actual vegetation showed that the ratio of vegetation were composed of 64.7% of Pinus densiflora forest, 3.2% of mixed forest of P. densiflora and deciduous broadleaf trees and 5.9% of deciduous broadleaf tree community out of overall area, 360ha. The type of P. densiflora forest were categorized into four communities; community having high potential of succession, community having low potential of it, the community being in the process of succession and community being in the process of natural selection. The succession tendency was in order of the community having low potential of succession(P. densiflora forest), having high potential of it(P. densiflora forest which is deciduous broadleaf trees are dominating in sub-canopy layer), being in the process of succession(P. densiflora-Prunus sargentii and P. densiflora-Quercus serrata community) and being in the process of natural selection(Q. serrata-P. densiflora and Q. aliena-P. densiflora community). In terms of vegetation management, P. densiflora forest having high potential of succession was needed to remove deciduous broadleaf trees in the sub-canopy layer and the community being in the process of succession was required to be pruning the branch in the canopy layer. Lastly, the community being in the process of natural selection was suggested to let it be in succession, since it is hard to be in the status of P. densiflora Forest.

• Korean Journal of Environment and Ecology
• /
• v.33 no.6
• /
• pp.677-685
• /
• 2019

We investigated the ecological characteristics of kumgang fat minnow (Rhynchocypris kumgangensis) in the Eocheon stream from October 2017 to September 2018. The water temperature was 10.2- 14.3℃ and remained below 15℃ during the year. The fishes in cohabitation with kumgang fat minnow were Cottus koreanus (16.62%), Phoxinus phoxinus (10.74%), Rhynchocypris oxycephalus (1.55%), Oncorhynchus mykiss (0.56%), Zacco koreanus (0.28%), and Iksookimia koreensis (0.14%%). The ratio of females to males was 1:0.91 and did not vary widely. The frequency analysis of total length indicated that the fishes with less than 40 mm in total length were one year old, those with 40 - 69 mm were two years old, those with 70 - 84 mm were three years old, and those with 85 mm or more were four years old for individuals collected in May through June. The sexually mature fishes were over two years old. The spawning season was from late May to late August, and the water temperature was 12.5~14.5℃ during the period. The prosperous spawning season was from June to July, and the water temperature was 13.6 - 14.5℃ during the spawning period. The average number of eggs in the ovaries was 1,006 (664 - 1,666) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 1.34±0.17 mm. The length-weight correlation of R. kumgangensis was BW = 0.00003TL^2.77 with the constant a as 0.00003, b as 2.77, the average condition factor (K) as 1.04(0.65~1.48), and the slope as -0.0012. The kumgang fat minnows inhabiting in the spring water had a longer spawning period, a fewer number of eggs in ovaries, and the lower condition factor (K) than those inhabiting other areas.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.182-192
• /
• 2015

In this paper, we introduce how to change the reaction rate as mol concentration when we scan enhanced MRI with GBCA(Gadolinium Based Contrast Agent), Also show the changing patterns depending on diverse MRI sequences which are made by different physical principle. For this study, we made MRI phantom ourselves. We mixed 500 mmol Gadoteridol with Saline in each 28 different containers from 500 to 0 mmol. After that, MR phantom was scanned by physically different MRI sequences which are T1 SE, T2 FLAIR, T1 FLAIR, 3D FLASH, T1 3D SPACE and 3D SPCIR in 1.5T bore. The results were as follows : *T1 Spin echo's Total SI(Signal Intensity) was 15608.7, Max peak was 1352.6 in 1 mmol. *T2 FLAIR's Total SI was 9106.4, Max peak was 0.4 1721.6 in 1 mmol. *T1 FLAIR's Total SI was 20972.5, Max peak was 1604.9 in 1 mmol. *3D FLASH's Total SI was 20924.0, Max peak was 1425.7 in 40 mmol. *3D SPACE 1mm's Total SI was 6399.0, Max peak was 528.3 in 3 mmol. *3D SPACE 5mm's Total SI was 6276.5, Max peak was 514.6 in 2 mmol. *3D SPCIR's Total SI was 1778.8, Max peak was 383.8 in 0.4 mmol. In most sequences, High signal intensity was shown in diluted lower concentration rather than high concentration, And also graph's max peak and pattern had difference value according to the each different sequence. Through this paper which have quantitative result of GBCA's reaction rate depending on sequence, We expect that practical enhanced MR protocol can be performed in clinical field.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.122-130
• /
• 2013

This work proposes a 12b 100MS/s 45nm CMOS four-step pipeline ADC for high-speed digital communication systems requiring high resolution, low power, and small size. The input SHA employs a gate-bootstrapping circuit to sample wide-band input signals with an accuracy of 12 bits or more. The input SHA and MDACs adopt two-stage op-amps with a gain-boosting technique to achieve the required DC gain and high signal swing range. In addition, cascode and Miller frequency-compensation techniques are selectively used for wide bandwidth and stable signal settling. The cascode current mirror minimizes current mismatch by channel length modulation and supply variation. The finger width of current mirrors and amplifiers is laid out in the same size to reduce device mismatch. The proposed supply- and temperature-insensitive current and voltage references are implemented on chip with optional off-chip reference voltages for various system applications. The prototype ADC in a 45nm CMOS demonstrates the measured DNL and INL within 0.88LSB and 1.46LSB, respectively. The ADC shows a maximum SNDR of 61.0dB and a maximum SFDR of 74.9dB at 100MS/s, respectively. The ADC with an active die area of $0.43mm^2$ consumes 29.8mW at 100MS/s and a 1.1V supply.

• Journal of dental hygiene science
• /
• v.10 no.2
• /
• pp.85-94
• /
• 2010

The purpose of this study was to research into the satisfaction with orthodontic treatment and the psychologically satisfactory condition to be expected, and to offer information in order to enhance medical-treatment service, by surveying the influential factors upon satisfaction with treatment targeting patients who receive orthodontic treatment. Targeting 382 patients who are under treatment at S dental clinic in Gyeonggi Province, B dental clinic in Daegu Metropolitan City, and Y dental clinic in Busan Metropolitan City, which specialize in orthodontic treatment, it carried out the direct interview survey of using the structured questionnaire from January 20, 2009 to February 28. The collected data was analyzed by using SPSSWIN 17.0 K. The following conclusions were obtained. 1. In the satisfaction with orthodontic treatment according to aesthetic factor, the group with bad aesthetic health condition was higher than the group with good health condition(p<0.05). As for the factor of tooth alignment, a case of good health condition was indicated to have higher(p<0.05) satisfaction than a case of being bad. 2. As for satisfaction according to necessity for orthodontic treatment, the satisfaction was high in a case of recognizing necessity much and of understanding medical-treatment contents much, and in a case of being well adjusted to the progression of orthodontic treatment. As for a psychological change after orthodontic treatment, the satisfaction was high in a case with a positive change(p<0.001). 3. The factors of influencing satisfaction with orthodontic treatment had significant influence in order of necessity for orthodontic treatment(p<0.001), adjustment to progression of orthodontic treatment(p<0.001), psychological change after orthodontic treatment(p<0.01), expectation level of dental health after orthodontic treatment(p<0.01), and understanding about treatment contents(p<0.01). As a result of research, the satisfaction with orthodontic treatment in patients with orthodontics is indicated to be relatively high. Thus, the careful consideration is considered to be probably necessary on qualitative part in medical treatment and on patients' expectation by grasping patents' mentally psychological condition.

• Journal of The Korean Association For Science Education
• /
• v.37 no.2
• /
• pp.359-370
• /
• 2017

The purpose of this study is to explore the changes caused by using smart technology in school science inquiry. For this, we investigated 12 elementary school teachers' perceptions by using an open-ended questionnaire, group discussions, classroom discussions, and participant interviews. The results of this study indicate that the introduction of technology into classroom inquiry can open up the various possibilities and can cause additional burdens as well. First, teachers explained that smart technology can expand the opportunities to observe natural phenomena such as constellations and changing phases of the moon. However, some teachers insisted that, sometimes, learning how to use new devices disrupts students' concentration on the inquiry process itself. Second, teachers introduced the way of digital measurement using smart phone sensors in inquiry activities. They said that digital measurement is useful in terms of the reduction of errors and of the simplicity to measure. However, other teachers insisted that using new devices in classroom inquiry can entail additional variables and confuse the students' focus of inquiry. Communication about inquiry process can also be improved by using digital media. However, some teachers emphasized that they always talked about both the purpose of using SNS and online etiquettes with their students before using SNS. Based on these results, we discussed the necessity of additional analysis on the various ways of using digital devices depending on teachers' perceptions, the types of digital competency required in science inquiry using smart technology, and the features of norms shaped in inquiry activities using smart technology.