• Journal of Convergence for Information Technology
• /
• v.9 no.4
• /
• pp.1-7
• /
• 2019

The medical environment, combined with IT technology, is changing the paradigm for medical services from treatment to prevention. In particular, as ICT convergence digital healthcare technology is applied to hospital medical systems, infrastructure technologies such as big data, Internet of Things, and artificial intelligence are being used in conjunction with the cloud. In particular, as medical services are used with IT devices, the quality of medical services is increasingly improving to make them easier for users to access. Medical institutions seeking to incorporate IoT services into cloud health care environment services are trying to reduce hospital operating costs and improve service quality, but have not yet been fully supported. In this paper, a patient information collection model from hospital IoT system, which has established a cloud environment, is proposed. The proposed model prevents third parties from illegally eavesdropping and interfering with patients' biometric information through IoT devices attached to the patient's body at hospitals in cloud environments that have established hospital IoT systems. The proposed model allows clinicians to analyze patients' disease information so that they can collect and treat diseases associated with their eating habits through IoT devices. The analyzed disease information minimizes hospital work to facilitate the handling of prescriptions and care according to the patient's degree of illness.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.229-235
• /
• 2019

The implementation of an in-band full-duplex wireless communication system is demonstrated in this study. In the analog/RF domain, the self-interference(SI) signal is reduced using a separate antenna for the transmitter and receiver paths, and most of the SI signal is canceled in the digital domain. A software defined radio(SDR) is used to implement the in-band full-duplex wireless communication system. The USRP X310 device uses transmitting and receiving antennas. By adjusting the gain of the transmitting and receiving ends of the SDR device, the magnitude of the SI signal entering the receiving antenna, and the size of the received signal from the outside, are both set to -64 dB. To verify the in-band full-duplex wireless communication performance, the source data is image and orthogonal frequency-division multiplexing is used for modulation. A WiFi standard frame with a carrier frequency of 2.67 GHz and bandwidth of 20 MHz is used. In the received signal, the SI signal is canceled by digital signal processing and the SI signal is attenuated by up to 34 dB. OFDM demodulation was impossible when the SI signal was not removed. However, the bit error rate is reduced to $2.63{\times}10^{-5}$ when the SI signal is attenuated by 34 dB, and no error is detected in the 100 Mbit data output as a result of passing through the Viterbi decoder.

• International Area Studies Review
• /
• v.22 no.4
• /
• pp.145-166
• /
• 2018

This study is due to global competition, the wall between regions is disappearing, customer needs are diversified, and market and technology are rapidly changing. Future growth engines, the importance of convergence capabilities for industrial competitiveness is being emphasized more. Therefore, companies should seek innovative means to increase the efficiency of the company by establishing optimized global management environment and establishing direction and strategy for utilization of convergence technology by improving industrial competitiveness. Firms must adopt and utilize related new technologies by strengthening their convergence capabilities through dynamic capabilities that are internal resource bases for new product development and process innovation. Globalize markets and technologies can expect higher innovation performance when aligning strategic direction with formalized technology competencies held by the firm and incorporating the convergence capabilities needed for technological innovation into processes. The study focuses on the effects of market and technology orientation on technological innovation performance, whether dynamic and convergence capabilities affect technological innovation performance, and dynamic and convergence capabilities to mediate between market and technology orientation. For the study, we surveyed 51.4% of global and multinational corporations that are internationally active or headquartered overseas. Based on the previous studies, hypotheses were established and the collected data were analyzed through utilization path analysis and Sobel test.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.11
• /
• pp.828-833
• /
• 2018

It is well known that reflected waves and resonance affect phase distortion. In addition, phase delay can be distorted by antenna impedance. In this study, we analyze the phase delay variation caused by the antenna impedance, considering mutual coupling effects. In addition, we confirm the beam steering characteristics. When was -10 dB and -7 dB, the maximum phase delay error was $18.5^{\circ}$ and $26.5^{\circ}$, respectively. The Monte Carlo simulation with an eight-element linear array antenna demonstrated that the RMS error of the beam steering angle ranged from $0.19^{\circ}$ to $0.4^{\circ}$, and the standard deviation ranged from $0.14^{\circ}$ to $0.33^{\circ}$ when the beam steering angle was in the range of $0^{\circ}$ to $30^{\circ}$, with the uniformly distributed phase error of $18.5^{\circ}$ and $26.5^{\circ}$. The side lobe level increased from 0.74 dB to 1.21 dB by the phase error from the theoretical value of -12.8 dB, with a standard deviation of 0.31 dB to 0.51 dB. This is verified by designing an eight-element spiral array antenna.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.11
• /
• pp.435-442
• /
• 2018

Outlier detection means to detect data samples that deviate significantly from the distribution of normal data. Most outlier detection methods calculate an outlier score that indicates the extent to which a data sample is out of normal state and determine it to be an outlier when its outlier score is above a given threshold. However, since the range of an outlier score is different for each data and the outliers exist at a smaller ratio than the normal data, it is very difficult to determine the threshold value for an outlier score. Further, in an actual situation, it is not easy to acquire data including a sufficient amount of outliers available for learning. In this paper, we propose a clustering-based outlier detection method by constructing a model representing a normal data region using only normal data and performing binary classification of outliers and normal data for new data samples. Then, by dividing the given normal data into chunks, and constructing a clustering model for each chunk, we expand it to the ensemble method combining the decision by the models and apply it to the streaming data with dynamic changes. Experimental results using real data and artificial data show high performance of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.24-30
• /
• 2018

Various investigations of vegetable oil extracted from natural resources are underway because of their low cost and environmental value. On the other hand, the double bonds in vegetable oil should be substituted to other high reactive functional groups due to their low reactivity for synthesizing bio-polymeric materials. ${\alpha}$-eleostearic acid, which consists of a conjugated triene, is the main component of tung oil, and the conjugated triene allows tung oil to have higher reactivity than other vegetable oils. In this study, tung oil was copolymerized with styrene and divinylbenzene to make a thermoset resin without any substitution of functional groups. The thermal and mechanical properties were measured to examine the effects of the composition of each monomer on the synthesized thermoset resin. The results showed that the products have only one Tg, which means the synthesized thermoset resins are homogeneous at the molecular level. The mechanical properties show that tung oil acts as a soft segment in the copolymer and makes a more elastic product. On the other hand, divinylbenzene acts as a hard segment and makes a more brittle product.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1387-1396
• /
• 2018

The purpose of this study was examined the effect of Tabata exercise using health care application on balance, gait and activities of daily living in patients with stroke. Twenty patients with stroke were participated patients with stroke in this study. Nineteen participants were randomly allocated to ten in experimental and nine in control groups. The both groups received the rehabilitation therapy during for 4 weeks. The experimental group performed Tabata exercise based on health care application, supervised under caregivers, during 30 min/day. The control group performed self-exercise supervised under caregivers, during 30 min/day. Both groups exercised for 4 weeks, 3 times a week, 30 min/day. Tabata exercise was trained by an physical and occupational therapists. The outcome measures were the BBS(: Berg Balance Scale), TUG(: Timed Up and Go, K-MBI(: Korean Modified Barthel Index). In results, the experimental groups showed a significant improvements after intervention in all assessments(p<.05), The control groups showed a significant improvements after intervention in BBS(p<.05) The experimental group showed a greater significant improvements than control group in TUG, BBS, K-MBI(p<.05). We suggest that Tabata exercise using health care application can have a effects of the improvements of balance, gait and activities of daily living than only self-exercise in patients with stroke.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.205-212
• /
• 2018

In order to overcome shortcomings of commercial analysis program for solving certain geotechnical problems, finite element method adopting isoparametric quadrilateral element was selected as a tool for analyzing soil behavior and calculating process was programmed. Two examples were considered in order to verify reliability of the developed program. One of the two examples is the case of acting isotropic confining pressure on finite element and the other is the case of acting shear stress on the sides of the finite element. Isoparametric quadrilateral element was considered as the finite element and displacements in the element can be expressed by node displacements and shape functions in the considered element. Calculating process for determining strain which is defined by derivatives using global coordinates was coded using the Jacobian and the natural coordinates. Four point Gauss rule was adopted to convert double integral which defines stiffness of the element into numerical integration. As a result of executing analysis of the finite element under isotropic confining pressure, calculated stress corresponding to four Gauss points and center of the element were equal to the confining pressure. In addition, according to the analyzed results for the element under shear stress, horizontal stresses and vertical stresses were varied with positions in the element and the magnitudes and distribution pattern of the stresses were thought to be rational.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.213-223
• /
• 2018

This study assessed the maintenance plan of the Shimbashi-Toranomon Development Area in Japan, which has recently been completed using the three-dimensional road system. In the main relevant law system, a three-dimensional road system, which enables the construction of buildings above and below the road, was applied. The specific construction regulations applying the financing power and knowledge of private business operators were applied. In the development district, city maintenance guidelines were established, and housing and shopping malls were regulated. This purpose was to promote change, unity of distance, effective use of land, and continuous urban revitalization with charm and vitality. The main features of the maintenance plan were accessibility and greenery, comfort and a sophisticated design, and a maintenance concept utilizing historical buildings and road space through the participation of local residents and the opinions of related committees. In addition, in the case of the construction of the upper and lower roads, the construction restrictions were relaxed, and the separation of the roads and the undergrounding of electric poles were promoted. The main aim was to improve the convenience of the residents and produce a pleasant road landscape.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.295-302
• /
• 2018

Face recognition (FR) has been widely used in various applications, such as smart surveillance systems, immigration control in airports, user authentication in smart devices, and so on. FR in well-controlled conditions has been extensively studied and is relatively mature. However, in unconstrained conditions, FR performance could degrade due to undesired characteristics of the input face image (such as irregular facial pose variations). To overcome this problem, this paper proposes a new method for determining if an input image is suitable for FR. In the proposed method, for an input face image, reconstruction error is computed by using a predefined set of reference face images. Then, suitability can be determined by comparing the reconstruction error with a threshold value. In order to reduce the effect of illumination changes on the determination of suitability, a preprocessing algorithm is applied to the input and reference face images before the reconstruction. Experimental results show that the proposed method is able to accurately discriminate non-frontal and/or incorrectly aligned face images from correctly aligned frontal face images. In addition, only 3 ms is required to process a face image of $64{\times}64$ pixels, which further demonstrates the efficiency of the proposed method.