• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.110-110
• /
• 2004

하나 또는 다수개의 압전액츄에이터(piezoelectric actuator)로 구성된 시스템에서 구동 효율을 높이는데 직접적인 영향을 미치는 고정밀과 빠른 응답 특성을 구현(implementation)하기 위하여, 입력전압에 대하여 출력전압이 선형적으로 추종하고 주파수 가변(variable)이 독립적이며 순차적으로 제어가 가능한 위상가변(phase shifting)형 압전액츄에이터 구동장치의 설계가 필요하다. 구동신호론 증폭하고 가변하는 고전압 증폭 구동장치는 압전액츄에이터 구동에 직접 영향을 주게 되므로, 이의 특성인 고주파에서의 위상지연 보상, 높은 회전비(slew rate)로 고전압에서 정현파의 찌그럼짐을 방지, 전압이득의 가변 및 안정화, 입력 및 출력 임피던스의 개선과 주파스 대역폭(band width)의 확장 등은 매우 중요하다.(중략)

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.267-268
• /
• 2013

본 논문에서는 아날로그 필터회로의 신호 증폭비에 따른 센서리스 각추정 성능에 대해 분석 하였다. 신호 주입 센서리스에서 높은 주파수 신호 주입 방법이 선호되는데, 주입 주파수가 커질수록 시스템 임피던스가 증가한다. 따라서 낮은 주파수 주입방법과 동일한 각추정 성능을 얻기 위해서는 상대적으로 큰 주입전압이 필요하다. 특히 전동기의 돌극성이 작거나 ADC의 정밀도가 낮으면 각추정이 불가능한 경우도 존재 한다. 하지만 아날로그 필터회로를 이용하여 주입 주파수 신호를 증폭할 경우 작은 크기의 전압주입으로 각추정이 가능하다. 아날로그 대역통과필터의 신호 증폭비에 따른 최대 각에러 값을 모의 실험을 통해 비교하고, 실제 회로를 설계하여 센서리스 각추정 성능을 시험평가 하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.41-47
• /
• 2006

The range-based method is easy to get the 3D data in detail, but the image-based is not. In this paper. employing the magnifying lens. the new approach to get the 3D data in detail is suggested. The magnifying lens amplifies the disparity in stereo vision system and the amplification of disparity is to increase the resolution of the depth. We mathematically and experimentally verifies the fact to amplify the disparity and suggests the method to improve the original 3D data with the detail 3D data.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.557-558
• /
• 2011

전기자동차의 축전지 관리 시스템(BMS : Battery Management System)의 잔존용량(SOC : State Of Charge)산정에는 Ah 측정법, 비중측정법, 전압측정법 등이 있다. 기존 전압 측정법의 경우 측정 전압을 프로세서에서 직접 처리하기 때문에 축전지의 미세한 전압 변화를 측정하지 못하여 잔존 용량 산정시 세밀한 계산에 어려움이 따른다. 본 논문에서는 축전지의 전압 측정 시 프로세서 전단에 전압의 부분 증폭회로를 추가하여 축전지의 미세한 전압변화를 증폭하여 측정하는 방법을 제안 하였다. 니켈수소전지를 대상으로 실험한 결과 충전 중 기존 전압측정법은 1.431V, 1.436V, 1.441V가 측정 되었을 때의 잔존 용량은 84%로 일정하였다. 같은 전압변화에서 부분증폭회로를 적용한 충전전압은 1.4297V, 1.4303V ~ 1.4352V, 1.4358V로 측정 되었으며, 그에 따른 잔존용량은 84% ~ 85%로 기존 전압 측정법 보다 약 9 ~ 10배 정도 세밀하게 측정 되었다. 제안한 방법을 통한 실험으로 제안된 방법이 기존 전압 측정법보다 세밀한 전압 측정 및 SOC산정이 가능함을 확인 하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.21-31
• /
• 2014

In this paper, we propose VLC(visible light communication) based multi-hop multimedia data transmission system. The main contributions and features of the proposed system are as follows. First, the contribution of this research is to develope the LED communication based multi-hop transmission network system which can transmit multimedia data(audio data, video data) with long distance. Second, the developed system has the following features: In transmitter, audio data and video data are transmitted via multi-hops using two channels. The relay in audio channel receives digital audio signal by using photo diode and then transmits the signal to receiver after error checking and amplifying. The receiver receives the encoded audio data via photo diode and then converts to analog audio signal by using decoding and amplifying. The relay in video channel receives video signal by using photo diode and then amplify the video signal using OP-AMP and then transmits the signal to receiver. The receiver amplifies the received signal from photo diode and then sends it to the monitor. The performance evaluation of the proposed system is conducted in the laboratory with fluorescent light source. The results of the performance evaluation confirm that the system can provide high quality multimedia data transmission from transmiter to receiver via multi-hop relays in a long distance while we can see there are differences in the transmitted multimedia(audio and video) quality according to the used LED colors.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.239-245
• /
• 2006

In this paper, the performance of a toggle brace-MR damper system is evaluated for the control of the structure excited by earthquake load and the non-linearity of the toggle system is investigated. Considering that the control force of MR damper described by Bingham model is a function of velocity, velocity amplification factor by the toggle brace system is calculated and the effect of toggle configuration on the amplification factor is also evaluated. Numerical results show that the control performance can be largely enhanced using toggle brace system especially for the case that the MR damper installed with conventional brace system such as Chevron and diagonal cannot provide enough control force under severe earthquake load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2106-2112
• /
• 1998

In this paper, we propose an antenna sharing scheme between 800 MHz AMPS and CDMA systems using CDMA transmission antenna. We restructured the path of signals such that signals from two systems use AMPS amplifier or CDMA amplifier. The performance of proposed scheme is compared with currently operating system's performance in terms of call connection rate, call completion rate and dropped-call rate after implementing proposed method to the AMPS/CDMA basestation. The results show that the voice quality and call connection of the proposed system is comparable to that of the commercial systems. The number of antenna at the base station can be reduced without performance degradation if the proposed transmission antenna sharing scheme and previously reported receiving antenna sharing technique are used together.

• Journal of Sensor Science and Technology
• /
• v.12 no.3
• /
• pp.121-127
• /
• 2003

In this study, we carried out a study for implementation of the pre-amplifier and the digital signal processing part for the potable EEG biofeedback system. As we consider characteristics of the EEG signal, we designed the pre-amplifier to obtain the EEG signal to be reduced noise signal. Because the EEG signal include EOG, EMG, ECG signals etc, it is difficult to analyze of the EEG signal. Therefore, we developed DSP board and operation program which was embed the LMS adaptive filter algorithm and operate with the pre-amplifier in the real time. The simulation signal and pure EEG signal is used in the experiment. As the result, we confirmed good efficiency of developed system and possibility of application to the portable EEG biofeedback system.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.3
• /
• pp.75-80
• /
• 2010

The present study tried to provide useful data for the acoustic design of sound amplification system with measuring and analyzing subjective preference and intelligibility by varying the number of speakers and their directivity. The results suggest that the room absorption plays a key role in subjective responses of listeners and the large sound absorption of ceiling contributes to the increase of intelligibility. Also, larger number of speakers with narrow directivity improves perceived intelligibility when speakers were installed at the lower height. However, the highest degree of intelligibility and preference were obtained when speakers were installed close enough to the sound absorptive ceiling. The highest intelligibility and preference were observed when 8 to 10 speakers with the directivity of 60 degree were used.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.3
• /
• pp.135-142
• /
• 2017

DDoS (Distributed Denial of Service) exhausts the target server's resources using the large number of zombie pc, As a result normal users don't access to server. DDoS Attacks steadly increase by many attacker, and almost target of the attack is critical system such as IT Service Provider, Government Agency, Financial Institution. In this paper, We will introduce the CNN (Convolutional Neural Network) of deep learning based real-time detection system for DNS amplification Attack (DNS DDoS Attack). We use the dataset which is mixed with collected data in the real environment in order to overcome existing research limits that use only the data collected in the experiment environment. Also, we build a deep learning model based on Convolutional Neural Network (CNN) that is used in pattern recognition.