• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.947-954
• /
• 1992

Polyethylene glycol (PEG) grafted poly (γ-benzyl L-glutamate) (PBLG) was synthesized by the substitution reaction of PBLG and PEG having primary amino groups at both ends. PEG-g-PBLG films containing hydroxyl group were also prepared by the substitution reaction of PEG-g-PBLG film and ethanolamine (EA). Adhesion of platelets and activation of plasma proteins on the copolypeptide films were studied. The results showed that platelets are less adhered and activated on the PEG-g-PBLG than on other polypeptides and plasma recalcification time (PRT) on the PEG-g-PBLG was longer than that on other polypeptides. These results were consistent with those of blood clotting time and thrombus formation on the polypeptides. As a results, PEG-g-PBLG surfaces showed better blood compatibility than PBLG or PEG-g-PBLG-EA surfaces.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.755-760
• /
• 2009

Styrene is broadly used as a polymer and a copolymer and is useful in manufacturing contact lenses due to its high refractive index. This study used styrene with the cross-linker EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Measurement of the physical characteristics of the copolymerized material showed that the refractive index is 1.4412 - 1.4628, water content 20 - 35%, visible transmittance 82.6 - 87% and the tensile strength 0.143 - 0.344 Kgf. Also, measurements showed that the refractive index and tensile strength increased while the water content decreased as the ratio of styrene increased. Based on the results of this study, the produced copolymer can be estimated to be suitable for use as a material for high performance functional contact lenses.

• Elastomers and Composites
• /
• v.37 no.1
• /
• pp.39-48
• /
• 2002

Linear and crosslinked polyurethane dispersions were synthesized with 2,4-toluene diisocyanate, dimethylol propionic acid, polyoxypropylene glycol and polyoxypropylene glycerin. The structures of these polyurethanes were characterized by $^1H-NMR$ and FT-IR and the properties were measured with DSC, TGA, Instron and AFM etc. In case of linear polyurethane dispersion, the particle size, viscosity and glass transition temperature of polyurethanes increased with higher molecular weight of polyol and the degree of crosslinking. The crosslinked polyurethanes which contains more than 15% of polyoxypropyleneglycerin didn't from dispersion, when mixtures by polyoxypropyleneglycol and polyoxypropyleneglycerin were used as polyols. Thus, we synthesized crosslinked polyurethanes with 5%, 8%, 13% and 15% weight percents of polyoxypropylene glycerin as polyol mixtures.

• Elastomers and Composites
• /
• v.34 no.1
• /
• pp.3-10
• /
• 1999

Kinetics of solution photopolymerization of acrylonitrile(AN) with sensitizer, such as $NaSCN,\;KSCN,\;Ba(SCN)_2,\;NH_4SCN,\;ZnCl_2$ and $Na_2SeO_3$, were studied using UV crosslinker at various monomer concentrations($1.8{\sim}7.58mo1/1$), sensitizer concentrations($10{\sim}60%$), reaction temperature($10{\sim}70^{\circ}C$), energy intensities($1,000{\sim}9,900{\mu}J/cm^2$) at isothermal condition under nitrogen atmosphere. Under the irradiation of high pressure mercury lamp(${\lambda}=365nm$). High conversion and uniform molecular weight were obtained compare to thermal polymerization at reaction temperature of $50^{\circ}C$, reaction time of 3hr and 50% NaSCN without any initiator. Their kinetic model was as follows : $R_p=0.0142[M]^{0.82}[I]^{0.49}[S]^{0.52}$ exp(-1.33/RT).

• Elastomers and Composites
• /
• v.42 no.3
• /
• pp.159-167
• /
• 2007

Hydraulic actuators are used widely for industrial machinery. The seal made from elastomer is used as a core part of the actuator, NBR(nitrile butadiene rubber) materials with high quality of oil resistance and abrasion resistance is used widely, requiring excellent characteristic of sealing. According to applied circumstances, the actuators for industrial machinery are used under different temperature situations. In this study, three different kinds of NBR, which is Hs70, 80, 90 are determined as one of hydraulic materials. An experimental investigation is performed to confirm the non-linearity under different temperature ($-10^{\circ}C,\;20^{\circ}C,\;80^{\circ}C,\;100^{\circ}C$) situation, material constants for finite element analysis and plastic deformation in accordance with Load-unload.

• Journal of the Korean Chemical Society
• /
• v.20 no.2
• /
• pp.158-165
• /
• 1976

The anionic polymerization of ${\varepsilon}$-caprolactam with N,N'-adipyl-bis-${\varepsilon}$-caprolactam as an initiator and potassium hydroxide as a catalyst was studied under various conditions.It was found that concentration of catalyst and initiator was 4.2 and 1.6 mole %, and polymerization temperature of 130$^{\circ}C$C, polymerization time of 1.5 hours was the optimum condition. The intrinsic viscosity and molecular weight of the obtained polymer was over 0.9 dl/g and 12,000. The polymerization was carried out in the presence of N-acyl-${\varepsilon}$-caprolactam as an initiator, it was observed that the reactivity of N,N'-adipyl-bis-${\varepsilon}$-caprolactam was greater than both of the N-benzoyl-${\varepsilon}$-caprolactam and N-acetyl-${\varepsilon}$-caprolactam. In general it was also observed that the intrinsic viscosity and yield of conversion was increased as an increasing of concentration of catalyst and initiator and also highly depend on temperature.

• Journal of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.155-166
• /
• 1980

3-(N-Carbonylpyrrolidone)-propanoic acid potassium-salt and 3-(N-carbonylpyrrolidone)propenoic acid potassium-salt were synthesized by the reaction of 2-pyrrolidone potassium-salt with succinic anhydride and maleic anhydride in acetone and in acetone and in benzene. The anionic polymerization of 2-pyrrolidone with 3-(N-carbonylpyrrolidone)-propanoic acid potassium-salt or 3-(N-carbonylpyrrolidone)-propenoic acid potassium-salt as an initiator and potassium hydroxide as a catalyst was studied. It was found that 2.0 and 1.0 mole %, concentration of catalyst and initiator, and temperature of $50^{\circ}C$ was the optimum condition obtaining highest conversion and viscosity of polymer. The inherent viscosity of nylon 4 was measured to be 1.2 dl/g and 2.3 dl/g.

• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.304-308
• /
• 2006

This study was performed to understand the behavior of protein mobility and intensity of enzymatic hydrolysis according to crosslinking of sodium caseinate, whey protein isolate, skim milk and whole milk powders with or without transglutaminase (TGase, w/w = 200 : 1) at $38^{\circ}C$. Whey protein was limited to crosslinking and skim milk was relatively more increased in high molecular polymer than whole milk. The degree of crosslinking decreased in the order of sodium caseinate>skim milk>whole milk>whey protein isolate. The SDS-PAGE results indicated that main bands of TGase treated samples had a high mobility and formed bands of molecular weights below 15 kDa by hydrolysis with pepsin after 10 min of reaction time. However, ${\beta}-lactoglobulin$ showed remarkable stability against pepsin hydrolysis treated with and without TGase. The high molecular polymers were easily hydrolyzed with digestive enzymes in vitro experiment. These results suggested that novel dairy products using TGase would have no special digestive problem in human body.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.3
• /
• pp.1-9
• /
• 2016

The objective of this study was to exam early stages of plant growth of Euonymus fortunei 'Emerald and Gold' and Hedera japonica grown in fabric felt bag attached on vertical greenery system with the ratio of hydrophilic polymer to substrate, 0(referred as Control), 0.1, 0.2, or 0.4% (v/v), in order to effectively utilize rainfall for low maintenance. After rainfall, the increase in volumetric water content of substrate amended with the hydrophilic polymer was between 13% and 87%, compared to that in Control. During drought period, higher ratio of hydrophilic polymer to substrate slowly decreased the volumetric water content, and increased plant height, leaf length, leaf width, number of leaves, branch number, and stem diameter of both Euonymus fortunei 'Emerald and Gold' and Hedera japonica with the highest fresh and dry weights of shoots or roots under the 0.1% ratio of hydrophilic polymer.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.21-32
• /
• 2011

The effects of high polymer on the seedling survival were investigated in three major turfgrasses. Twelve treatments were used in the study with different rates of sand, soil organic amendment (SOA), and water-swelling polymer (WSP). Turfgrass seedling survival rate was evaluated in creeping bentgrass (CB), Kentucky bluegrass (KB), and zoysiagrass (Zoy) grown under greenhouse conditions. Significant differences were observed among the treatments. Seedling survival rates were variable in CB, KB, and Zoy according to mixing rates of SOA and WSP, being maximum 20.2% in differences. At 6 weeks after seeding, the survival rates ranged from 0.6 to 61.9% in CB, 4.2 to 75.3% in KB and 1.7 to 82.1% in Zoy. A pattern of seedling emergence varied with time among treatments influenced by WSP rates. A proper mixing rate of WSP is considered to be 5% for CB and 5 to 10% for KB and Zoy. In general, overall effect of WSP on seedling survival was clearly observed in the mixtures of sand 80% and SOA 20% in CB. The best result, however, was found from the mixture of sand 85% and SOA 15% in both KB and Zoy. When mixing sand with WSP, a proper rate of SOA is considered to be 20% for CB and 15 to 20% for KB, while 10 to 15% for Zoy. A further research is needed to investigate the effects of WSP on the turf quality in mixtures of sand, SOA, and WSP before a field application.