• Spatial Information Research
• /
• v.15 no.2
• /
• pp.135-146
• /
• 2007

The purpose of this study was to ascertain and analyze environmental factors of subgenus Lycoctonum in Korea for conservation and management of rare high land plant species by GIS. We derived the habitat model of Lycoctonum from GPS coordination, habitat factors and digital topology maps. Suitable altitude fur the subgenus Lycoctonum is from 470m to 1320m, and northern slopes(between 15.5 and 36 degrees) are ideal for the Lycoctonum populations. In addition to altitude, slope and aspect, deciduous forest and approximation to water source were found as important factor. Using GIS and the Lycoctonum habitat model, we overlaid elevation, aspect, slope and land cover layers and analyzed buffer from the water source on two topology maps, Yang-Soo and Mock-Dong. After making prediction map for Lycoctonum habitat, we verified the existence of Lycoctonum populations on the predicted sites through field survey. Through this research, we're convinced that GIS software is powerful tool for plants conservation, such as finding unknown habitat or selecting alternative habitat.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.121-127
• /
• 2014

Comprehensive prosthetic treatment requires considerations from various points of view. The anterior guidance is important factor in prosthodontic treatment of anterior teeth. Lingual surface contour of anterior restoration is so critical that a small mistake of laboratory or clinical process can cause discomfort of patient and disharmony of entire dentition. There are no guidelines for lingual surface contour that fit all patients. Therefore the lingual surface of provisional restoration is most accurately described as a customized one. The dentist transfers the exact information of anterior guidance that has made through long term provisional restoration to the technician. This case introduce that the duplication technique of CAD/CAM system to reproduce the anterior guidance of provisional restoration. This method can improve satisfaction of both patient and dentist.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.679-683
• /
• 2013

BSR noise emerges in a vehicle as a result of road vibrations, engine vibrations, and speaker vibrations. BSR noise occurs with an irregular impact or stick slip friction phenomenon as the influence of the resonance mode when the vibration input load is transferred along poor joint and contacting pairs of the system. A sub-structure method of finite element analysis is required to detect impacts and slip in the full vehicle model. This study presents a method for sub-structure modeling and a rattle and squeak detection methodology that considers the characteristics of road vibration inputs.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.5
• /
• pp.1-11
• /
• 2001

The purpose of this study is to develop the main program and pre/post processor for the geometric and plastic non-linear analysis of steel jacket structures subjected to wave and earthquake loadings. In this paper, steel jackets are modelled using geometric non-linear space frames and wave loadings re evaluated based on Morrison equation using the linear Airy theory and the fifth Stokes theory. Random wave is generated using JONSWAP spectrum. For earthquake analysis, dynamic analysis is performed using artificial earthquake time history. Also the plastic hinge method is presented for limit analysis of steel jacket. In the companion paper, the pre/post processor is developed and the numerical examples are presented for linear and non-linear dynamic analysis of steel jackets.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.11
• /
• pp.1228-1235
• /
• 2012

A refrigerator has many components which are made from diverse materials such as metal, polymer, plastic, and rubber. So, it generally requires much time and efforts to build up an analysis model in finite element analysis. In this work, to reduce the computational time and efforts a simplified modeling method was proposed for the analysis of a refrigerator. Occasionally, a stick-slip noise occurs in a refrigerator due to relative slip between shelf and inner-case. When we solve the problem by a FE analysis, we should model the structures with detail for considering the contact conditions; by this reason, too many efforts are consumed in the conventional analysis method. Through this work, we shows the concept of simplifying approach and a good agreement with the results of a real model analysis. And also, the evaluation of the proposed method and the application of contact analysis using the simplified model are discussed.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.5-12
• /
• 2013

The critical velocity effect on railway trackbed means the amplification of vibration energy when the train running-speed and group velocity of ground surface wave are superimposed. It is called a pseudo-resonance phenomenon of time domain. In the past, it was not issued because the train speed was low and the ground group velocity was higher. But since the high-speed train is introduced, critical velocity reported causing a track irregularity. So far, theoretical analysis has been performed because of the complexity of formation process. However it requires reasonable consideration which is similar to actual track and trackbed conditions. In the present paper, finite element analysis to verify the critical velocity effect is performed considering each track structure and trackbed supporting stiffness. As a result, the deformation amplification caused by the critical velocity effect is verified to analyze each supporting stiffness and track system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.376-384
• /
• 2018

The aerodynamic far-field noise was computed by an acoustic analogy code using the permeable surface for the UH-1H rotor blade in hover. The permeable surface surrounding the blade was constructed to include the thickness noise, the loading noise, and the flow noise generated from the shock waves and the tip vortices. The computation was performed with compressible three-dimensional Euler's equations and Navier-Stokes equations. The high speed impulsive noise was predicted and validated according to the permeable surface locations. It is confirmed that the noise source caused by shock waves generated on the blade surface is a dominant factor in the far-field noise prediction.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.236-236
• /
• 2011

진천지역의 지하수 유동체계를 분석하기 위해 진천지역 내 530개 공의 지하수위를 1년간 관측하였다. 이중 360개 공에서는 분기별로 한번씩 총 4회, 130개 공에서는 월1회씩 총 12회 지하수위를 관측하였으며, 40개 공에 대해서는 1시간 간격으로 자동관측을 실시하였다. 관측결과를 수집하여 지하수위의 변동특성, 지하수위 분포, 지하수 심도분포 등을 실시하였으며, 이와 같은 지하수위 분석 결과를 바탕으로 지하수 유동체계를 분석하였다. 조사지역의 평수기 지하수위 분포에 대해 수리학적인 접근법(hydraulic approach) 및 동수역학적 접근법(hydrodynamic approach)에 근거하여 수리수두(hydraulic head) 및 전수두(total head)를 분석하여 2차원 및 3차원 수리경사도를 작성하였다. 이러한 지하수위 분포에 따른 분석 성과와 지형 및 수문지질을 고려하여 함양 및 배출지역을 분류하였으며, 이와 함께 기분석된 지하수위 등고선에 따른 유선망도를 작성하였다. 지하수는 지하수위의 표고 및 압력에 따른 위치 에너지 차에 의하여 대수층 매질을 통하여 유동하며 수두가 높은 곳에서 낮은 곳으로 일정한 수리경사를 갖고 지하수 등수위선에 연직 방향으로 형성된 유선을 따라 이동한다. 따라서 지하수의 유동방향은 지하수 수리경사 분석이 이루어진 8개 방향의 지하수위 경사 중 최대경사를 갖는 방향으로 지하수 유동이 발생하므로, 이를 지하수위 유동방향으로 결정하였다. 이와 같이 분류된 지하수 함양 중간 및 배출 지역과 지하수의 함양과 배출의 양적인 측면에 서 유동체계의 규모를 고려하여 조사 지역을 8단계로 구분하였다. 또한 조사지역의 지하수 유동체계를 종합적으로 규명하기 위하여 기 분석한 조사지역의 지하수위 등고선, 지하수위 등심도선, 지하수 수리경사, 지하수 유동방향 및 지하수 함양-배출체계와 지형기복, 그리고 주요 하천 등의 제반 요소를 중첩 분석하여 종합적으로 규명하고, 그 결과를 지하수 유동체계도로 작성하였다. 지하수 유동체계 분석결과는 수문지질 평가와 오염취약성 평가 및 지하수 관리 방안 수립에 활용될 수 있을 것으로 기대된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4A
• /
• pp.364-370
• /
• 2002

In this paper, we propose a VLSI array architecture for high speed processing of FBMA. First of all, the sequential FBMA is transformed into a single assignment code by using the index space expansion, and then the dependance graph is obtained from it. The two dimensional VLSI array is derived by projecting the dependance graph along the optimal direction. Since the candidate blocks in the search range are overlapped with columns as well as rows, the processing elements of the VLSI array are designed to reuse the overlapped data. As the results, the number of data inputs is reduced so that the processing performance is improved. The proposed VLSI array has (N$^2$+1)${\times}$(2p+1) processing elements and (N+2p) input ports where N is the block size and p is the maximum search range. The computation time of the rat reference block is (N$^2$+2(p+1)N+6p), and the block pipeline period is (3N+4p-1).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.747-757
• /
• 2010

The ice accreted on the airfoil is one of the critical drivers that causes the degradation of aerodynamic performance as well as aircraft accidents. Hence, an efficient numerical code to predict the accreted ice shape is crucial for the successful design of de-icing and anti-icing devices. To this end, a numerical code has been developed for the prediction of glaze ice accretion shape on 2D airfoil. Constant Source-Doublet method is used for the purpose of computational efficiency and heat transfer in the icing process is accounted for by Messinger model. The computational results are thoroughly compared against available experiments and other computation codes such as LEWICE and TRAJICE. The direction and thickness of ice horn are shown to yield similar results compared to the experiments and other codes. In addition, the effects of various parameters - temperature, free-stream velocity, liquid water contents, and droplet diameter - on the ice shape are systematically analyzed through parametric studies.