• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.188.2-189
• /
• 2003

시설재배 만감류인 부지화 감귤의 수확후 저장유통시 부패 감소 및 상품성 제고를 위하여 환경친화적 전처리방법으로서 중온처리의 적용 가능성을 확인하고자, 제주 서귀포산 부지화(한라봉)감귤의 열수 및 열풍 처리에 따른 저장중 품질특성 변화를 살펴보았다. 표면상처가 없는 일정 크기의 건전 과실을 선별한 후, 각각 52$^{\circ}C$에서 2분(52-2m), 6$0^{\circ}C$에서 20초(60-20s) 동안 열수에 침지하거나 45$^{\circ}C$에서 4시간(45-4h), 8시간(45-8h) 동안 열풍을 가한 다음 5$^{\circ}C$에서 냉각 건조하였다. 충분히 냉각된 과실을 통기성 천공 LDPE 필름에 포장하여 5"C에서 21일, 18$^{\circ}C$에서 7일간 저장하면서 생리, 이화학, 관능적 특성을 측정하였다. 중온처리 직후 초기 호흡률은 처리구 모두 무처리구와 비교하여 다소 높았으나, 저장중 처리구 감귤의 호흡률은 감소하여 21일째는 무처리구와 동일한 수준을 나타내었다. 과실내 기체조성은 저장기간 및 처리구간에 차이를 보이지 않았으나 21일부터는 저장온도 전환에 따라 $CO_2$가 다소 증가하는 양상을 보였다. 과실의 pH, 산도, 경도는 중온처리에 따른 유의적 차이를 구분할 수 없었으나, 고형분 함량과 생체 중량감소율은 열풍처리구에서 다소 높게 유지되었다. 과피 표면색 역시 열풍처리구 (45-8h)가 다른 것에 비해 저장중 짙게 나타났으나 열수처리구에서는 가시적 변화를 발견할 수 없었다. 한편 부패과 발생률에 있어서 열수처리구가 축부병 등에 의한 짓무름 현상 및 곰팡이 발생정도를 가장 낮게 나타내었고, 관능검사에서도 열수처리구가 변색, 시듦, 광택 등의 외관 품질항목에서 유의적으로 우수하게 평가되었다. 결과적으로 중온 열수처리는 부지화 김귤의 수확후 저장유통중 부패과 발생률을 감소시키고 외관품질을 유지하는데 효과적인 전처리방법임을 확인할 수 있었다. 있었다.

• Journal of the Society of Disaster Information
• /
• v.9 no.1
• /
• pp.56-64
• /
• 2013

The study examines the quiet pavement using fine-size aggregates and warm-mix technique to reduce traffic noise. In order to evaluate the quality of pavement, mix design and laboratory tests were carried out. Test results showed that using 10mm aggregates can reduce the cantabro loss compared with 13mm aggregates due to increase contact area between aggregates. Mixing and compaction temperatures of warm mix quiet pavement should be determined by gyratory compactor test because it is used high viscosity asphalt binder. Using warm-mix additive could reduce compaction temperature by about $15^{\circ}C$. Noise measurement and permeability tests were conducted at the test road for evaluation of the field performance. All of quiet pavements meet the standard of permeability and have sufficient porosity. Noise reduction of the quiet pavement using fine-size aggregates is more effective than that using 13mm aggregates. In particular, the effect of noise reduction was noticeable at low speeds.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.69-69
• /
• 2011

태양열 발전 플랜트에 사용되는 중고온 범위의 축열조에 고체-액체간 상변화를 수행하는 용융염을 축열물질로 사용하면 액체상 또는 고체상만으로 된 열저장 매체에 비해 축열조의 규모를 축소함과 동시에 축열온도의 균일성 향상에 기여할 수 있다. 중온인 $250{\sim}400^{\circ}C$ 범위에서 이용 가능한 용융염으로는 질산칼륨($KNO_3$), 질산리튬($LiNO_3$)등이 있다. 그러나 이러한 용융염의 가장 큰 단점은 열전도율이 매우 낮다는 것이며, 이로 인해 요구되는 열전달률을 성취하기 위해서는 많은 열접촉면적이 필요하다는 것이다. 이러한 단점을 극복하는 방법을 도입하지 않고서는 축열시스템의 소규화를 성취하는데 큰 효과를 가져올 수 없다. 한편 열수송 성능이 탁월한 히트파이프를 사용하면 열원 및 열침과 축열물질 사이의 열전달 효율을 증가시켜 시스템의 성능 향상과 동시에 소규모화에 기여할 수 있다. 중온 범위 히트파이프의 작동유체로서 다우섬-A(Dowtherm-A)는 $150^{\circ}C$이상 $400^{\circ}C$까지의 범위에서 소수에 불과한 선택적 대안 중 하나이다. 따라서 본 연구에서는 용융염을 사용하는 중온 태양열축열조에 적용 가능한 다우섬-A 히트파이프의 성능을 파악하여 기술적 자료를 제시하고자 하였다. 열원으로는 고온 고압의 과열증기, 그리고 열침으로는 중온의 포화증기를 고려하였다. 용융염 축열조를 수직으로 관통하는 히트파이프는 하단부에서 열원 증기와 열교환 가능하며, 중앙부에서 축열물질과 열교환하고, 상단부에서는 중온 증기와 접촉할 수 있도록 배치하였다. 축열모드에서는 히트파이프의 하단부가 증발부로 작동하고, 중앙부가 응축부로 작동하여 용융염으로 열을 방출하면 용융염의 온도가 상승하고 용융점에 도달하면 액상으로의 상변화가 진행되면서 축열이 활성화된다. 축열모드에서 히트파이프의 상단부는 단열부로 작동한다. 방열과정에서는 히트파이프의 하단부가 단열된 상태이고, 중앙부는 용융염으로부터 열을 받아 증발부로 작동하며, 상단부는 중온 증기로 열을 방출하므로 응축부로 작동한다. 즉, 축열시스템의 작동모드에 따라 하나의 히트파이프에서 증발부, 응축부, 단열부의 위치가 변하게 된다. 특히, 히트파이프의 중앙 부분이 응축부에서 증발부로 전환될 때에도 작동이 보장되려면 내부 작동유체의 연속적인 재순환이 가능해야 하므로, 일반 히트파이프에서와는 달리 초기 작동액체의 충전량을 증발부 전체의 체적보다 더 많이 과충전해야 한다. 이러한 히트파이프의 성능 파악을 위한 실험에서 고려한 변수들은 열부하, 작동액체의 충전률, 작동온도 등이며, 열수송 성능의 지표로서는 유효열전도율과 열저항을 이용하였다. 중온범위에서 적정한 작동온도를 성취하기 위해 실험에서는 전압 조절기로 열부하를 조절하는 동시에 항온조로 응축부의 냉각수 입구 온도를 제어하였다. 하나의 히트파이프에 대해서 최대 1 kW까지의 열부하에서 냉각수 입구 온도를 $40^{\circ}C$에서 $80^{\circ}C$ 범위로 변화시키면 히트파이프 작동온도를 약 $250^{\circ}C$ 내외로 조절 가능하였다. 히트파이프 작동액체 충전률은 윅구조물의 공극 체적을 기준으로 372%에서 420%까지 변화 시켰다. 실험 결과를 토대로 열저항과 유효 열전도율을 각각 입력 열유속, 작동온도, 작동액체 충전률 등의 함수로 제시했다. 동일한 냉각수 온도에서는 충전률이 높을수록 히트파이프의 작동온도가 감소하였다. 열저항 값의 범위는 최소 $0.12^{\circ}C/W$에서 최대 $0.15^{\circ}C/W$까지로 나타났으며 유효 열전도율의 값은 최소 $7,703W/m{\cdot}K$에서 최대 $8,890W/m{\cdot}K$까지 변화했다. 최소 열저항은 충전률 420%인 경우에 나타났는데 이때의 작동온도는 약 $262^{\circ}C$이었다. 히트파이프의 작동한계로서 드라이아웃(dry-out)은 충전률 372%의 경우에 열부하 950 W에서 발생하였으나, 그 이상의 충전률에서는 열부하 1060 W까지 작동한계 발생이 관찰되지 않았다. 실험 결과 본 연구에서의 히트파이프는 중온 태양열 축열조에 적용되어 개당 약 1 kW의 열부하를 이송하면서 축열물질 및 축방열 대상 유동매체와 열교환을 하는데 사용하는데 충분할 것이라 판단된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.3
• /
• pp.214-222
• /
• 2012

Several acidogenesis batch tests, and BMP (Biochemical Methane Potential) with food waste leachate was tested at various organic loading rates (OLRs) on the mesophilic ($35^{\circ}C$) and thermophilic ($55^{\circ}C$) conditions. In acidogenesis batch test, VS removal efficiencies were 27.3% and 30.6% at $35^{\circ}C$ and $55^{\circ}C$, respectively. Removal efficiency of VS at $55^{\circ}C$ was higher than that at $35^{\circ}C$. With decrease in VS, SCOD increased as reaction time increased. Solubilization efficiency of VS were 27.4% and 33.4% at each reaction temperature within 4 days acid fermentation. Methane yield were 461 and 413 $mLCH_4/gVS$ at mesophilic and thermophilic BMP test, respectively. SCOD solubilizations in the themophilic acid fermenter showed 8~17% higher than those in the mesophilic fermenter. COD removal efficiency showed higher in the mesophilic acid fermenter at low organic loading rate. While at high organic loading rate, it was higher in the thermophilic acid fermenter. VS removal efficiency was higher at the mesophilic temperature, however, it decreased at OLR higher than 6 kg $COD/m^3{\cdot}day$. On the contrary, VS removal efficiency did not decrease but maintain at thermophilic temperature. The amount of methane gas generated from mesophilic methanogenesis digester was 12.6, 21.6, 27.4 L/day at OLR of 4, 5, 6 $COD/m^3{\cdot}day$, respectively. The amount of methane gas generated from themophilic methanogenesis digester was 14.3, 20.6, 25.2 L/day at each OLR, respectively, which is about 15~20 L/day lower than those generated at mesophilic digester.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.29-40
• /
• 2011

Warm-Mix Asphalt(WMA) technologies have been developed since 15 years ago, which are internationally and domestically concerned with energy-saving and environmental-friendly technologies in public and private sectors of highway engineering. The performance of asphalt mass is traditionally evaluated by the penetration, viscosity, or Superpave tests. This research, however, is focused more on the properties depending on asphalt film thicknesses instead of evaluating asphalt mass behaviors by those tests. For this approach, a new testing protocol and analysis method are described by the bonding properties on each film thickness. This testing method and analysis tool are borrowed from those of DSR Moisture Damage test and applied by using ARES. The analysis results indicate that there is a limit film thickness between $200{\mu}m$ and $400{\mu}m$, which causes significant changes of the properties. In addition, the results show that the property changes of Hot-Mix Asphalt(HMA) and WMA on the limit film thickness are also different. Therefore, it is suggested that the properties on thin film thicknesses between $200{\mu}m$ and $400{\mu}m$ should be considered in order to evaluate WMA properly.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.1
• /
• pp.109-119
• /
• 2002

This study is to estimate that food waste bags with biodegradable plastic are really decomposed by microorganism in composting with food waste and to examinate how biodegradable plastic affects composting. 6 kinds of 30%, 4 kinds of 100% and 2 kinds of none biodegradable plastics were used in d1is study. In 30% biodegradable plastics the highest Degradation rare is 6% in meso-condition and 10% in thermal-condition. Srain at auto break decreased to 150% in meso-condition and 120% in thermal-condition. Stress at max load were also reduced to $180kgf/cm^2$ in mesocondition and $200kgf/cm^2$ in thermal-condition. Usually, LLDPE decreased larger than HDPE in physical characreristics but HDPE is higher in degradation rate. 1n stain at auto break and stress ar max load 100% biodegradable plastic declined to 230% and to $380kgf/cm^2$ in meso-condition and to 440% and to $400/cm^2$ in thermal-condition respectively. 100% biodegradable plastics showed higher biodegradation and decomposition then 30%. They appeared clearly through SEM observation. As a result, it was not appropriate to use 30% biodegradable plastics as food waste bag because they were not decomposed perfectly. It is possible to use 100% biodegradable plastic as it but cost is too high. So development of technique is needed.

• Food Science of Animal Resources
• /
• v.24 no.2
• /
• pp.115-120
• /
• 2004

This study was carried out to investigate the effect of the scalding temperature at slaughtering process on meat quality and storage properties of chicken. The yellowness (b$\^$*/ value) of skin decreased at high scalding temperature (65-67$^{\circ}C$) and WHC (water holding capacity) increased from 67.04％ at low temperature (53-55$^{\circ}C$) to 69.26％ at high temperature. WBS (Warner-Bratzler Shear force) significantly increased from 1.70kg/0.5inch$^2$ to 2.54kg/0.5inch$^2$ as the scalding temperature increased (p＜0.05). TBARS (Thiobarbituric Acid-Reactive Substance) values were 0.25mgMA/kg at low temperature, 0.24mgMA/kg at middle temperature (59-61$^{\circ}C$) and 0.27mgMA/kg on 3 days of storage. Total aerobic counts (TPC) were 4.99 logCFU/mL at low temperature, 4.88 10gCFU/mL at middle temperature and 4.05 logCFU/mL. Although TPC was decreased as the scalding temperature increased. The detection rate of feather at carcass inspection was low as the scalding temperature increased and the detection rate of large feather (＞lcm) was not significantly different between middle temperature and high temperature. Exposed flesh was severe as the scalding temperature increased. In conclusion, meat color and physical properties of chicken were acceptable when the carcasses were scalded at low temperature, but they were microbiologically susceptible and uneasy to remove the feather. The yellowness (b$\^$*/ value) of skin decreased at high scalding temperature, and total aerobic counts (TPC) were decreased as the scalding temperature increased, and easy to remove the feather.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.585-592
• /
• 2014

Mixing effect on anaerobic digestion of livestock wastewater was different results depending on the researchers have been reported. The purpose of this study was to understand application of Korea livestock waste it was necessary to determine the effect of mixing. 4 anaerobic reactors were operated mesophilic and thermophilic temperature with continuous mixing or non mixing condition, respectively. Experimental result showed If temperature was same, TCOD removal efficiency of continuous mixing reactor was 0.11-0.58% higher than non mixing reactor. Different mesophilic and thermophilic temperature, there was no significant difference of TCOD removal efficiency. Continuously mixed digester gas production was 1.7-4.6% higher than non mixed digester. In addition, mesophilic digester gas production was 29.1-32.1% higher than the thermophilic digester. It was due to the thermophilic digester believe the inhibition of ammonia. This study suggest that the optimized operation condition of anaerobic digestion for livestock wastewater treatment was mesophilic continuous mixing state.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.28-34
• /
• 2012

In this study, we operated a UASB (upflow anaerobic sludge blanket) reactor by using foodwaste leachate as a raw material with the method of Mesophilic Digestion ($35{\pm}0.5^{\circ}C$) and Thermophilic Digestion ($55{\pm}0.5^{\circ}C$). During 20 days of operating time with the Mesophilic Digestion, the recirculation ratio of effluent was stepwisely changed in every five days. Thermophilic Digestion was carried out at the same condition for Mesophilic Digestion. Results showed that the organic removal efficiency of Mesophilic Digestion was over 90% and the yield of methane production was from 66 up to 70%. The organic removal efficiency of Thermophilic Digestion was over 80% and the yield of methane production was between 62 to 68%. Also, when UASB reactor was operating to over the 3Q effluent recirculation, the experiment could be carried out economically and stably.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.4
• /
• pp.348-352
• /
• 1992

Investigation on the characteristics of actomyosin was prepared from leg and breast muscle of duck treated by hard scalding and subscalding method and their extractability , ATPase activity , solubility and SDS polyacrylamide gel electrophoresis were compared. The extractability of actomyosin in leg and breast muscle of duck by hard scalding was 7.84 and 39.84mg/g, whereas 4.79 and 28.04mg/g by subscalding respectively. Ca-ATPase activity of breast muscle wash higher than that of leg muscle. In case of leg muscle, hard scalding was higher tan subscalding. Breast muscle showed that subscalding was higher than hard scalding in less than ionic strength 0.08, and was lower than hard scalding in over ionic strength 0.08.Mg-ATPase was great in ionic strength and subcalding was relatively higher than hard scalding. Without regard to be treated method and part, the start point and end point of solubility were like. Hard scalded muscle and breast muscle showed that proteins in thin filament produced many extraction.