• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.581-584
• /
• 2003

Recently, construction industry has an interest on the maintenance area of construction facilities to maximize utilization of the each facility. This study suggests an interactive electronic technical manual for bridge facility to improve quality and to ensure safety of the bridge facility. The improvement method of bridge maintenance system consists of the basic information ell the facilities, maintenance manuals and measurement system. And the suggested system is based on the facilities, maintenance manuals and measurement system. And the suggested system is based on IETM (Interactive Electronic Technical Manual), and this study defines and develops a $BF\_IETM (Bridge Facility\_ITEM$ as the bridge maintenance system.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.5
• /
• pp.527-537
• /
• 2007

The main girders and cross-beams of an H-beam bridge consisted of factory-made H-beams, providing better conditions for quality control. Also, on-site fabrication works can be minimized and most of the stiffeners can be omitted, enabling simple and economic construction. In this study, the effect of the Multi-Stepwise TPSM (M-TPSM) on improving the maximum span length and section efficiency is analyzed. Compared to a 30-m-long, five-girder conventional plate girder bridge, structural analysis results showed that 50.7~55.1% of the girder height and 24.1~26.2% of the self-weight may be reduced by the application of M-TPSM to a five-girder H-beam bridge constructed with H-$900{\times}300$beams. In case of conventional H-beam bridges without M-TPSM, it was found that seven girders are required for a similar level of load-carrying capacity. Therefore, it is concluded that by the application of the M-TPSM, the H-beam bridge would become one of most cost-competitive options for short- and medium-span bridges.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.2
• /
• pp.47-53
• /
• 2014

The paper investigates the limit state of deflection for short and medium span steel girder bridges. Deflection depends on stiffness of steel girders and integrity of the reinforced concrete slab (composite action). Load and resistance parameters are treated as random variables. A probabilistic model is developed for prediction of the deflection. The structural performance can be affected by deterioration of components, in particular corrosion of steel girders. In addition, the creep of concrete can greatly influence the deflection of composite structures. Therefore, the statistical models for creep and corrosion of structural steel are incorporated in the model. Structures designed according to the AASHTO LRFD Code are considered. Load and resistance models are developed to account for time-variability of the parameters. Monte Carlo simulations are used to estimate the deflections and probabilities of serviceability failure. Different span lengths and girder spacing are considered for structures designed as moment-controlled and deflection-controlled. A summary of obtained results is presented.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1541-1545
• /
• 2009

홍수 기간 중 부유잡목에 의한 수위상승 원인은 크게 상류부에서 이송되어진 유송잡물에 의한 교량 등의 수공구조물에 집적으로 인한 통수능 부족에 의하여 발생되는 수위상승과 하천내 수공 구조물의 부적절한 설계 및 시공으로 인한 수위상승으로 구분되어 진다. 현재 교량의 여유고 산정에 사용되는 홍수위는 통수능을 고려하지 않은, 하천정비계획에 사용되는 홍수위를 적용하고 있으며, 다만 통수능의 확보를 위하여 경간장에 대한 제한을 두고 있을 뿐이다. 중소하천에 위치하는 교량의 경우, 여유고 확보에 대한 기준을 적용함에 있어서 교량이 위치한 하천 단면에서의 통수능의 영향이 고려되어야 유수의 월류에 대한 위험성을 줄일 수 있다. 더욱이 하천설계기준(2005)에서는 고정 홍수량에 의한 여유고 산정치를 제안하고 있을 뿐이기 때문에, 하천설계기준에서 교량과 관련된 여유고도 하상변동과 만곡부에 의한 수위 상승, 유송잡물에 의한 통수능 영향, 계산오차 등을 고려하여 충분한 여유고를 확보하도록 보완할 필요가 있다. 본 연구에서는 부유잡목에 의한 수위상승 원인을 분석을 하고, 이에 따른 수리모형실험을 통하여 부유잡목의 높이/폭(H/B)변화에 의한 수위상승, 부유잡목의 형태별 수위상승, 교각사이 개도비에 따른 수위 상승량을 산정하여 기존의 여유고에 대한 추가적인 여유고를 확보하여 홍수시 통수능을 확보하고자 하였다. 부유잡목의 형태에 따른 수위상승량을 산정하기 위하여 개도비를 70%로 고정한 후, Fr수를 변화시켜 부유잡목의 높이/폭(H/B) 형태에 따라 산정한 결과, 부유잡목이 존재하지 않는 상태에 비하여 부유잡목에 의한 영향으로 인한 수위증가율이 Fr값이 클수록 더욱 크게 나타났으며, 부유잡목이 동일면적인 경우 폭(B)에 비하여 높이(H)가 커질수록 수위 상승이 크게 나타났다. 또한, Fr수 변화에 따른 최고수위 상승율을 구하였을 때, 상류조건에서 Fr < 0.5 인 경우는 기존 여유고에 대하여 최대 10%의 여유고를 추가 확보하며, 0.5 < Fr < 1 인 경우는 기존 여유고에 대하여 최대 20%의 여유고를 추가 확보하도록 설계하는 것이 바람직하다.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.11-20
• /
• 1995

본 글에서는 건물 및 교량의 면진/제진 기술의 연구개발과 실용화 현황에 대하여 전반적으로 살펴보았다. 현재 면진/제진 기술의 연구는 매우 활발하게 진행 되고 있으며 여기서 그 전체를 서술하기는 어렵다. 고량의 면진/제진 기술은 새로운 내진기술로서 금후 고량의 다경간 연속화, 장경간화, 고교가화, 엄격한 용지조건 에서의 고량건설에 중요해질 것으로 생각된다. 현재 제진구조 시스템은 안전한 거주 셩의 관점으로부터 중소지진 및 강풍 등에 대한 외란대책으로서 실용화 기술이 진행 되고 있다. 실무적인 관점으로부터 주로 구동장치의 개발이 중심이 되고 있으며 이것에 의하여 제진구조 시스템의 성능이 결정된다고 해도 과언이 아니다.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.3
• /
• pp.51-57
• /
• 2019

In recent years, the occurrence of localized torrential rain has increased due to the increase in heavy rainfall and massive typhoons caused by abnormal weather. As a result, the flow rate of small and medium-sized rivers in Korea is rapidly increasing, affecting the safety of bridges and increasing the risk of scour. However, the domestic bridge construction technology does not reflect the watershed characteristics of domestic rivers because the bridge scour depth calculation formula developed overseas is used to calculate the bridge scour depth. Therefore, this study is a basic study for prevention of bridge damage according to scouring phenomenon, and a comparative analysis was performed between the experimental data measured through hydraulic model test and the scour depth formulas applied in Korea. In addition, the statistical analysis between experimental data and scour depth formula shows that Coleman's (1971) formula estimates the best scour depth. The results of this study are expected to be used to calculate more accurate bridge scour depth in river design and bridge design.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.5 s.60
• /
• pp.603-612
• /
• 2002

Numerical analyses have been carried out in order to check the applicability of high-strength steel to a medium-sized steel bridge. Using the yield strength of steel, Average Daily Truck Traffic (ADTT), and fatigue grade of structural detail as analytical parameters, the minimum weight sections that satisfy the limit states of the AASHTO LRFD design specification were determined through an optimization scheme. Likewise, the effects of the number of girders and span length on the applicability of high-strength steel were evaluated. Results show that high-strength steel may be employed in the steel bridge, since steel weight decreases with increasing yield strength regardless of the fatigue effect. Nonetheless, appropriate countermeasures against fatigue should be determined since it is a major factor in the effective use of high-strength steel in steel bridges.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.793-804
• /
• 2006

Various PSC and steel-concrete composite railway bridges are being developed for short-medium spans with structural and economic efficiency. According to the design concept, the prestressed composite girder bridge has the advantages of being lightweight and having low girder depth, with the capacity for long spans. However, the dynamic behavior under a passing train is one of the critical issues concerning these railway bridges designed with more flexibility. Therefore, it is very important to evaluate the modal parameters before performing dynamic analyses. In this paper, real-scale prestressed composite girders were fabricated as a test model and modal testing was carried out to evaluate modal parameters including natural frequency and modal damping ratio. During the modal testing, a digitally controlled vibration exciter as well as an impact hammer was applied to obtain frequency-response functions, and the modal parameters were also evaluated after the fracture of test models. With application of reliable properties from modal tests, the estimation of dynamic performances of prestressed composite girder railway bridges can be obtained from various parametric studies on dynamic behavior under the passage of a moving train.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.792-795
• /
• 2008

AGT system is a kind of light railway train. AGT system use of concrete track and rubber tire, so it can be reduce the noise and vibration, compare to the normal train system. And, the dynamic responses of normal bridge are influenced by the dynamic characteristics of bridge, the speed of vehicle and the surface roughness of railway. But the AGT system bridge is influenced not only the above facts but also the guiderail unevenness, because, AGT vehicle steered by guiderail. So, in this study, optimized service condition is suggested for the design and operation of AGT system, by the means of experimental study. The experiments are executed for PSC bridge with length of 30m, at the AGT test line in Kyongsan. The test results are compared and investigated according to the prominence. In the test result, the guiderail prominence influenced on the dynamic response of bridge. It shows a increase as compared with no guiderail prominence in the dynamic response value acceleration, displacement, stain.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.387-398
• /
• 2010

Recently SMEs(small and medium enterprises) in Korea have experienced severe labor shortages. In particular, college graduates avoiding SMEs are widely spotted. According to previous studies, the main causes of the evasion by college graduates are the inferior working environment and low wages. Some studies also state that SME workers experience discrimination. However, most studies have focused only on unemployment issues of the young graduates. In this research, the results of follow-up surveys on the employment status and job conditions of recent college graduates was linked as a panel data, and the performance of the graduates was analyzed. Based on the analysis, we found college graduates who are employed SMEs are likely to have their initial career fixed to the SMEs. Second, the job separation records of the young SME workers does not show positive labor market performances such as upward movements or wage increases, and the process itself turned out to be entailed frequent separation. Third, the inferior wage level at SMEs and the fact that this effect is cumulatively amplified has been a key factor for evading SMEs. Thus, it is difficult to say that the early-stage careers in SMEs are constructive in future career development. On the contrary, the early careers at SMEs result in lower labor market outcomes, and frequent job separation.