• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.40.2-40.2
• /
• 2019

허블 텐션이란 허블우주망원경으로 관측한 허블상수 값과 플랑크 위성으로 측정한 허블상수 값이 일치하지 않는 문제를 일컬으며 현재 우주론에서 주목 받는 이슈 중 하나이다. 밀도가 작은 지역에선 약한 중력으로 공간의 팽창이 빠르고, 반대로 밀도가 큰 지역에서는 팽창이 느리다. 만약, 우리 근처에서 상대적으로 낮은 밀도 때문에 팽창 속도의 차이가 생긴다면 허블 텐션의 원인을 쉽게 설명할 수 있다. 이 문제를 구체적으로 다루기 위해, 우리는 우주 상수를 고려한 아인슈타인 중력의 구형 우주론 풀이인 Lambda-Lemaître-Tolman (ΛLT) 모형을 사용하였다. 우리로부터 먼 현상은 기존의 ΛCDM(Λ cold dark matter) 모형으로, 가까운 현상은 국소적인 LT 모형으로 기술함으로써 허블 텐션 문제를 해결하고자 하였다. 또한, 마코프 체인 몬테 칼로 (MCMC) 방법을 적용하여 천문 관측 결과를 잘 맞추는 ΛLT 모형의 변수들을 탐색하였다.

• Journal of Korean Society of Transportation
• /
• v.30 no.5
• /
• pp.43-59
• /
• 2012

It is generally assumed about trip distribution estimation model that growth factor model's estimation accuracy is higher than that of other models in short-term and that gravity model's estimation accuracy is higher than that of other models in long-term. For validation of such assumptions, this study compares estimation accuracies of each estimation model using 3year(1988, 1992, 2004) O-D tables from Daegu city. Each estimation model's accuracy were compared by mid-size and large-size zone as well as short-term and long-term target years. The results show that the trip distribution estimation model selection by usual assumption is not always right.

• Journal of Korea Water Resources Association
• /
• v.46 no.12
• /
• pp.1221-1234
• /
• 2013

The purpose of this study is to suggest the methodology for the computation of uplift pressure and discharge of the seepage flow under gravity dam. A 3-dimensional FDM model is developed for this purpose and this model can simulate the saturated Darcian flow in heterogeneous media. For the verification of the numeric model, test simulation has been executed and the mass balance has been checked. The error does not exceed 3%. Using the developed model, The uplift pressure and seepage flow discharge under gravity dam has been calculated. The uplift pressure shows the similar pattern, comparing with the result of flow-net method. As the length of grout curtain increases, the uplift pressure decreases linearly, but the seepage flow discharge shows the non-linear decreasing pattern. The coefficients of the formulas in the dam-design criteria have been analysed, and ${\alpha}=1/3$ corresponds to the value when the length of curtain grout is 70% of the aquifer height. The uplift pressure near the pressure relief drain has the big curvature vertically and horizontally. The developed model in this study can be used for the evaluation of the effects of seepage flow under gravity dam.

• Korea Trade Review
• /
• v.41 no.2
• /
• pp.185-202
• /
• 2016

Interests in renewable energy have been increasing with low-carbon policy and concerns about radioactivity. And solar energy is receiving attention as the most realistic energy in the industry. Demand for solar energy was started in Germany and European countries, and further expanding to other countries. And Korea became one of the high technology level countries in that industry. So, systematic analysis is needed for trading fact and overseas expansion of Korea's photovoltaic energy together with increased demand in the world. In this paper, we analyzed panel data for 25 years, from 1990 to 2014 from 11 countries that have track record with Korea's PV product. It is conducted based on Gravity model and matched with general report for Korean PV industry. But it shows different result for other factors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.51-61
• /
• 2023

Travel demand estimation of E-Scooter is the start point of solving the regional demand-supply imbalance problem and plays pivotal role in a linked transportation system such as Mobility-as-a-Service (a.k.a. MaaS). Most focuses on developing trip generation model of shared E-Scooter but it is no study on selection of an appropriate zone scale when it comes to estimating travel demand of E-Scooter. This paper aimed for selecting an optimal TAZ scale for developing trip distribution model for shared E-Scooter. The TAZ scale candidates were selected in 250m, 500m, 750m, 1,000m square grid. The shared E-Scooter usage historical data were utilized for calculating trip distance and time, and then applying to developing gravity model. Mean Squared Error (MSE) is applied for the verification step to select the best suitable gravity model by TAZ scale. As a result, 250m of TAZ scale is the best for describing practical trip distribution of shared E-Scooter among the candidates.

• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.697-706
• /
• 2019

A multiphase flow modeling approach equipped with a hybrid turbulence modeling method is applied to compute the gravity currents in a rectangular channel. The present multiphase solver considers the dense fluid, the less-dense ambient fluid and the air above free surface as three phases with separate flow equations for each phase. The turbulent effect is simulated by the IDDES (improved delayed detach eddy simulation), a hybrid RANS/LES, approach which resolves the turbulent flow away from the wall in the LES mode and models the near wall flow in RANS mode on moderately fine computational meshes. The numerical results show that the present model can successfully reproduce the gravity currents in terms of the propagation speed of the current heads and the emergence of large-scale Kelvin-Helmholtz type interfacial billows and their three dimensional break down into smaller turbulent structures, even on the relatively coarse mesh for wall-modeled RANS computation with low-Reynolds number turbulence model. The present solutions reveal that the modeling approach can capture the large-scale three dimensional behaviors of gravity current head accompanied by the lobe-and-cleft instability at affordable computational resources, which is comparable to the LES results obtained on much fine meshes. It demonstrates that the multiphase modeling method using the hybrid turbulence model can be a promising engineering solver for predicting the physical behaviors of gravity currents in natural environmental configurations.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.5-16
• /
• 2001

소일네일링 구조물의 설계 및 안정해석에 관한 지금까지의 연구는 대부분 굴착 배면지반의 자중만을 고려하여 연구 개발된 굴착사면에 인접하여 하중이 재하되는 경우, 그의 거동에 관한 연구는 미비한 실정이다. 따라서 본 연구에서는 원심모형시험기를 사용하여 하중재하시 소일네일링 구조물의 거동과 파괴 메카니즘에 관한 매개변수적 실험을 실시하였다. 매개변수적 실험에서는 네일의 길이 및 간격, 네일의 설치각, 하중재하위치 등을 다양하게 변화시키면서 1g 상태에서 축소모형실험을 실시하는 한편, 30g 및 50g까지 중력수준을 증가시킨 상태에서 상재하중실험을 실시하였다. 실험으로부터 얻어진 결과를 바탕으로 하중-침하 특성, 매개변수의 변화에 따른 영향, 중력수준의 증가에 따른 영향, 파괴메카니즘 등을 비교 분석하였다.

• Management & Information Systems Review
• /
• v.37 no.2
• /
• pp.87-108
• /
• 2018

This article explores the international trade flow of Bangladesh's ready-made garments (RMG). We first suggest the brief history and an international structure of trade among countries by using the trade volume. Then we implemented a gravity model regression with the sample of 38 major partner countries in order to investigate the potential export market for the RMG industry. The fixed effect and random effect model for the panel data during the period of 1990 to 2011 are estimated. Our result shows that Bangladesh's RMG exports are affected positively by the size of economy, inflation, exchange rate, foreign direct investment(FDI) and trade openness. On the other hand, the distance between trading partners are related negatively with the trade volume. We used the estimated coefficients from the panel regression in order to predict RMG export potential of Bangladesh. This might show which country is the promising export market for Bangladesh RMG industry. We found that Bangladesh has the highest potential of RMG export with Japan and USA, which seem to have considerable room for export growth if trade barriers and constraints are removed. We added some policy implications for encouraging the RMG export of Bangladesh by using the results from the analysis.

• Journal of Korean Society of Transportation
• /
• v.29 no.2
• /
• pp.81-89
• /
• 2011

Trip distribution is the second step of the conventional travel demand estimation process, which connects trips between origin and destination, while transport mode choice is the third step of the process, which chooses transport mode among several modes serving for each origin-destination pair. Although these two steps have closely connected, they have been estimated independently each other in the estimation procedure. This paper presents an integrated model combining trip distribution and transport mode choice, and also presents its solution algorithm. The model integrates gravity model adopted for the trip distribution process with logit model employed for the mode choice process. The model would be expected to cope with the inconsistency issue existing in the conventional travel demand estimation procedure. This paper also presents an equilibrium condition, sensitivity of the model, and compares them with those of existing models.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.25-36
• /
• 2005

In this study, we suggested a new approach method forecasting distribution demand of urban rail transit usign fuzzy control, with intend to reflect irregularity and various functional relationship between trip length and distribution demand. To establish fuzzy control model and test this model, the actual trip volume(production, attraction and distribution volume) and trip length (space distance between a departure and arrival station) of Daegu subway line 1 were used. Firstly, usign these data we established a fuzzy control model, nd the estimation accuracy of the model was examined and compared with that of generalized gravity model. The results showed that the fuzzy control model was superior to gravity model in accuracy of estimation. Therefore, wwe found that fuzzy control was able to be applied as a effective method to predict the distribution demand of urban rail transit. Finally, to increase the estimation precision of the model, we expect studies that define membership functions and set up fuzzy rules organized with neural networks.