• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.521-524
• /
• 2008

The purpose of this study is to identify the character and condition of Cr in the clinker and thereby contribute to the research for reduction in utilizing Cr in the cement manufacturing process. The concentration of chromium by cement particle size and the distribution of chromium by clinker mineral were measured. Next, correlation was considered between chromium and the soluble components in cement. As a result, in the range that cement particles were 20${\mu}$m or less, highest soluble hexavalent chromium was found. When the concentration of chromium was measured through mineral separation, belite and the interstitial phase were higher in chromium than in alite. soluble hexavalent chromium was contained in domestic cement less than 20ppm, and its conversion ratio was somewhat high as 10 to 40% or so.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.155-164
• /
• 2005

Volcanic rocks from the Mt. Mudeung area which are composed of Hwasun andesite, Mudeungsan dacite and Togok rhyolite contain plagioclase phenocrysts in common. Majority of the repeated twins observed in optical microscopy are albite twin and some are pericline twin. EPMA studies of plagioclases from Hwansun andesite, Mudeungsan dacite and Togok rhyolte indicate calcic andesine, andesine-oligoclase, nearly pure albite, respectively Albite twin and pericline twin can be easily distinguished through TEM diffraction patterns, which is quite difficult by optical microscopy. Plagioclases in volcanic rocks from the Mt. Mudeung area do not show e-reflection in (100) electron diffraction patterns, probably because of their high cooling rate, which inhibited phase separations during cooling.

• Land and Housing Review
• /
• v.15 no.1
• /
• pp.147-156
• /
• 2024

This study aims to reduce CO₂ generated during the manufacturing process by using limestone (CaCO₃), a carbonate mineral used in the production of cement clinker, as a decarbonated raw material that does not contain CO₂. Among various industrial by-products, we attempted to use cement paste attached to waste concrete. In general, limestone for cement must have a CaCO₃ content of at least 80% (CaO, 44% or more) to ensure the quality of cement clinker. However, the CaO content of waste concrete fine powder is about 20% on average, so in order to use it as a cement clinker raw material, the CaO content must be increased to more than 35%. Therefore, by using the difference in hardness of the mineral composition of waste concrete fine powder to selectively crush CaO type minerals with relatively low hardness, classify and sieve, the CaO content can be increased by more than 35%. Accordingly, in this study, we experimentally and statistically reviewed and analyzed the optimal conditions for efficiently separating CaO and SiO₂ and other components by selectively pulverizing minerals containing relatively low CaO through a grinding process. As a result of the optimal grinding conditions experiment, it was found that the optimal conditions were a grinding time of less than 5 minutes, a type of material to be crushed of 30 mm, and an amount of material to be crushed of 1.0 or more. However, it is judged that it is necessary to review pulverized materials of mixed particle sizes rather than pulverized products of single particle size.

• Resources Recycling
• /
• v.5 no.4
• /
• pp.25-31
• /
• 1996

The wastes ot l~mestone mines have been cause the extrar.ngance of the valuablz m e r a l s and destruction of the environment. Therefore, \\-c tied ta separation of calcite illid clay from the limestone mine wastes by rotntmg screen type separator made by ourselves in order to recyding such us a raw matcriala for cement maimfacture. CaO amtents in the separated coarse products increased from 37.36 wt% to 42+2 wt% at the condition ihat water content in wastes was lzss than 6wt%, the passing time of specimen in &amber was 15 semnds and the rotation speed was 6OLl qm. A process in order lo separate wastes effectively to having wide range aI part~dcs ize was cstablishcd and CaO contents of coarsc products through this process increased to 46.85 wt%. Tbis rcsult is insuEiicient to directly rcusing as a raw malerials for cement. However, it is supposed that coarse products would be able to be reuscd as a raw materials uf cement, if only it rs sclected dolomite in wastes, and really it may be possible in fields Othenvise, undcrsize products(less than 20 mm) would be able to recycling as a raw of cement bccause chcmicrl campasitions of thosc is kept almost constant v&cs on the overall process.

• Resources Recycling
• /
• v.8 no.3
• /
• pp.37-42
• /
• 1999

Ths sludy was canied out to recover gold and sllics from abandoned gold mine talings with about 4.5 ghonAu and 84.88 wt% SOz. Tl~bee nef~cialiop~ro~c esses including crushing, screening, magnelic and gravity (humprey sp~rals,h aking table) separation \ulcornervex employed. Results were Feasible to rccovn h e gold concentrates (307.1 gltoilon .4u . 0.60 wr%, 97.7 giton Au : 0.27 wl%, 15.3 &/ton Au . 5.23 wt%, 21.2 g/ton Au : 2.42 wl%) and silica (96.40 wi% SiO\ulcorner yield 60 65 ~ 1 % )

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.55-64
• /
• 2013

The generation of staurolite from the mixed-phase muscovite and the metamorphic environment of shales in the Baekunsa formation, Hongsan, Buyeo, were studied using electron probe micro analysis (EPMA). The average chemical composition of mica-type mineral is $(K_{1.11}Na_{0.26}Ca_{0.04})(Al_{3.93}Fe_{0.21}Mg_{0.07})(Si_{6.08}Al_{1.92})O_{20}(OH)_4$, and shows a characteristics of the so-called illite with a low content of interlayer cations and Fe, Mg in octahedral sites. The mica-type mineral shows a typical chemical composition of the mixed-phase among muscovite, pyrophyllite, and chlorite (mixed-phase muscovite, $Mu_{70.5}Py_{23.5}Ch_{6.0}$). The staurolite, in general, occurs with the mixed-phase muscovites, pyrophyllites, and aluminosilicates in the rock. We consider that staurolite can be formed by a reaction involving pyrophyllite such as pyrophyllite+chloritoid. The chloritoid is formed by a reaction between pyrophyllite and chlorite and is supposed to be used up in the process of staurolite formation. As a result, the mixed-phase muscovite, formed during the transition of illite to muscovite, plays an important role for the generation of the staurolite. Considering that the reaction occurs at the temperature higher than $300^{\circ}C$ and pyrophyllites transform into aluminosilicates at $350^{\circ}C$, the shale in the Baekunsa formation can be considered to have been experienced a metamorphic temperature between $300{\sim}350^{\circ}C$.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.491-494
• /
• 2010

지구온난화의 주범인 온실가스 중 이산화탄소 농도 증가에 따라 현재 전 세계적으로 사회적, 환경적, 경제적으로 피해가 나타나고 있다. 그래서 CCS연구를 적용하여 이산화탄소를 포집하는 연구가 활발하게 진행 되고 있으나 분리, 수송, 저장 등의 추가적인 비용이 발생하는 문제점을 가지고 있다. 본 논문은 생체촉매효소를 이용하여 이산화탄소를 포집하는 연구를 하였다. 반응온도, pH, 이산화탄소 농도 등의 변수를 이용한 생체촉매효소의 활성평가, 반응속도, 광물화의 특성에 관하여 연구하였다.

• The Microorganisms and Industry
• /
• v.15 no.2
• /
• pp.54-56
• /
• 1989

19세기 초기까지 인류가 사용해왔던 약물들은 동식물및 광물질 기원의 물질을 단순하게 처리한 것들이었다. 그 이후 화학의 발달및 필수적인 생리활성 검색법의 개발에 의해 비로소 현대적인 의미의 약물학(Pharmacology)의 시대가 열리게 되었다. 화학의 발달에 의해 오래전부터 사용되던 약제 중의 유효성분의 분리, 정제, 확인과 신물질의 합성이 가능해졌으며, 생리활성 검색법의 개발에 의해 유효성의 측정및 약물의 생체내 작용기전의 확인이 연구될 수 있었다. 일단 이러한 필수적인 도구와 테크닉이 주어지자 신약개발은 관련분야의 급속한 발달과 보조를 같이하여 가속적으로 발전하였으며 여기에 의약품 제조업의 성장이 자극제로 작용하였다. 그 결과 신개발약물의 양적인 팽창, 약물에 의해 조절될 수 있는 질병의 증가 및 약물작용기전의 이해등의 성과가 얻어질 수 있었다. 신개발약물의 수는 세계 제2차대전 종료후 10여년 사이에 최대에 달하였으나 그후 신약의 허가에 수반되는 법령의 강화에 따라 감소하기 시작하여 현재는 거의 일정한 수준을 유지하고 있다.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.119-127
• /
• 1996

The effect of sodium hydroxide treatment on some physicochemical properties of zeolite mordenite mineral was studied with chemical analyses, powder X-ray diffraction, thermal analyses, infrared analysis, measurement of carbon dioxide adsorption and gas chromatography. Mordenite mineral from tuffaceous rocks in Yeongil and Wolsung area was used as a starting material and treated with 0.1-5N NaOH aqueous solution at about $95^{\circ}C$ in the water bath for three hours.At the concentration of sodium hydroxide below 0.5N, all chemical compositions in the tuff were virtually insoluble and the mordenite structure did not change. At the concentration above 1N, the chemical compositions such as silica, alumina, etc., were dissolved. The dissolution ratio of silica was lager than that of alumina, and the ratio of silica to alumina in the tuff decreased sharply in the concentration range of 2 to 3N. Intensity of X-ray diffraction peak of mordenite (202) plane and the adsorbed amount of carbon dioxide also decreased with the increasing concentration of sodium hydroxide above 1N. These decreases corresponded to the degree of mordenite structure collapsed.The separation of gas chromatography of nitrogen, oxygen and carbon monoxide was not affected by the sodium hydroxide treatment, but elution peaks of methane and krypton tended to be broadened and their retention time was shortened. The elution peaks of both methane and krypton tended to be overlapped with those of nitrogen and oxygen.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.1
• /
• pp.62-79
• /
• 1994

The quanttative and structural analysis of the binary standard mixtures of albite and quartz, and microcline and albite were carried out using the Rietveld refinement method in order to investigate the accuracy and precision of the method. The quantitative analysis using the Rietveld method results in a standard deviation of 4 wt % for the albite-quartz standard mixtures and 1 wt % for the microcline-albite standard mixtures, suggesting that its accuracy is far better than that of the conventional XRD method in which only a few selected peaks are utilized. Furthermore, the unit-cell parameters of component minerals in mixtures were also estimated accurately during the analysis. It was observed that the refined weight fractions deviate systematically from their measured values when the method is applied to the mixtures that contain minerals with different degrees of preferred orientation, such as albite-quartz mixtures. The preferred orientation parameters and R-values suggest that the systematic deviation is caused as a result of the preferred orientation effect of feldspar crystallites. It is evident that the preferred orientation corrections are of help for the accurate determination of unit-cell parameters, although they may not improve the result of quantitative analysis significantly. The refined weight fraction of the mineral with higher degree of preferred orientation in mixture is greater than the measured one. This is apparently caused by the effect of geometry of feldspar crystallites in the surface of the mounted sample. The Rietveld refinement method minimizes the problems inherent in the traditional XRD methods, such as the line overlap, primary extinction, and preferred orientation effect, by fitting every data point in a whole pattern explicitly. Furthermore, accurate unit-cell parameters as well as scale factors that can be obtained from the Rietveld refinement are used for the quqantification. The present stdudy demonstrates that the Rietveld method yields far more accurate analytical result than the conventional XRD quantitative analysis method does.