• Journal of the Korea Society of Computer and Information
• /
• v.14 no.8
• /
• pp.127-136
• /
• 2009

Voice of the customer(VOC) is a term used in business and information technology(IT) to describe the process of capturing a customer's requirements in enterprises or various organizations. Recently, in order to satisfy customer's needs, enterprises try to utilize VOC at recurrence prevention of problems and their improvement activities, planning and development of product/service by processing, storing, and analyzing VOC. Until now, VOC management systems are introduced around service industries such as hotel business and insurance/financial business, etc. This paper proposes an integrated management scheme of VOC which are captured by various communication channels and describes a case of implementing an integrated VOC management system on the basis of the proposed scheme for the large-scale manufacturing company. By the implemented system, VOC are stored and utilized as the important knowledge assets of enterprises.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4B
• /
• pp.371-378
• /
• 2006

In this study, a theoretical equation was derived based on Odgaard (1986) and Chang (1988) to reveal the streamwise variation of the secondary flow in meandering channels. The new equation describes the transverse component of the secondary flow as a function of streamwise and vertical directions. To validate the proposed equation, hydraulic experiments were conducted in laboratory meandering channels having different sinuosity. Comparison of experimental results with the proposed equation and an existing equation revealed that the equation was in good agreement with the measured data. However, the existing equation overestimated the transverse velocity. Investigation of the variation of the secondary flow with respect to hydraulic parameters based on the new equation showed that the secondary flow tended to increase as the sinuosity, the roughness, and the aspect ratio became larger. Also, streamwise profile of the secondary flow was sensitive to variations of the roughness and the aspect ratio.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.1001-1011
• /
• 2006

It is a general agreement that exact statistical solutions can be found by a Monte Carlo technique. Due to difficulties, however, in the numerical generation of random fields, which satisfy not only the probabilistic distribution but the spectral characteristics as well, it is recognized as relatively difficult to find an exact response variability of a structural response. In this study, recognizing that the random field assumes a constant over the domain under consideration when the correlation distance tends to infinity, a semi-theoretical solution of response variability is proposed for general structures. In this procedure, the probability density function is directly used. It is particularly noteworthy that the proposed methodology provides response variability for virtually any type of probability density function, and has capability of considering correlations between multiple random variables.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6A
• /
• pp.641-650
• /
• 2009

This paper presents new equations for member forces in concrete floating structures under wave loadings. The currently adopted design equations for wave loadings disregard the effect of mismatch between design wave length and the length of the structure. In most cases, however, additional internal forces occur due to disequilibriating buoyancy caused by the difference between design wave length and the length of the structure. In this study, new design equations considering the influence of the disequlibriating buoyancy is proposed. In addition, finite element solutions are sought to demonstrate the adequacy of the proposed design formulae in estimating the actual internal forces considering the structure as either rigid or flexible. It has been found that member forces are decreased approximately to around 55% for flexible model when compared with the rigid one.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.6
• /
• pp.293-300
• /
• 2007

Turbulent boundary layer over an underwater vehicle is formed when it moves underwater and wall pressure fluctuation within the turbulent boundary layer generates flow-induced noise by exciting the elastic hull of the underwater vehicle. One of the methods to reduce this flow noise is to attach a compliant layer on the surface of the vehicle. In order to observe the possibility of noise reduction in the water when the compliant layer treatments are applied on the surface, three types of specimens those are a bare steel plate, a steel plate coated with neoprene and a steel plate with polyurethane coating material are tested at various flow speeds in a low noise cavitation tunnel. This paper presents the results of measurements and analysis of wall pressure fluctuations which is a main source of flow noise, within the turbulent boundary layer on three specimens. Its results could be shown that about 10dB reduction of wall fluctuation pressure at high frequencies was achieved due to the dissipation of turbulent energy by the compliant coating while it makes the turbulent boundary layer thicker and changes the behavior of turbulent flow in the layer.

• Journal of Wind Energy
• /
• v.14 no.2
• /
• pp.26-33
• /
• 2023

In this study, the global response characteristics of floater and mooring for floating offshore wind turbine with a detachable mooring system are performed. Global motion and structural response result extracted from the coupled motion analysis of 10MW DTU floating offshore wind turbine with detachable mooring system modeled by high-order boundary element model and finite element mesh, were used to study the characteristics of tension on mooring lines subjected to three different types of ocean loads. Breaking limit of mooring line characterized by wind, current and wave load has a major effect on the distribution of mooring tension found in time domain analysis. Based on the numerical results of coupled motion analysis, governing equation for calculating the motion response of a floater under ocean loads, and excitation force and surge motion and tension respectively are presented using excursion curve. It is found that the response of floater is reliable and accurate for calculating the tension distributions along the mooring lines under complex loadings. This means that the minimun breaking limit of mooring system satisfied a design criteria at ultimate ocean environmental loading condtions.

• Journal of Wind Energy
• /
• v.13 no.4
• /
• pp.50-57
• /
• 2022

Renewable energy is emerging as a way for the government to carry out its 2030 carbon-neutral policy. In this regard, the demand for wind turbine generators for renewable energy is increasing. As a result of restrictions due to civil complaints, offshore wind power generators are actively being developed. At this time, offshore wind power generation has higher maintenance costs, material costs, and installation costs compared to onshore wind power generation. So, an economic evaluation that calculates imports and costs is an important task. The levelized cost of energy (LCOE) is an economic evaluation index used in the energy field. In this paper, based on AEP calculated by windpro, the LCOE calculated by the wind power cost estimation model published in the NREL Economic Analysis Report, installing one 15 MW unit and installing one 20 MW unit and seven units were reviewed and analyzed. As a result, AEP was calculated as 0.140($/Kwh) for the installation of a single 15 MW, 0.142($/Kwh) for the installation of a single 20 MW, and 0.119 ($/Kwh) for the installation of a 20 MW farm. Therefore, it was confirmed that the installation of the single 20 MW was more economical than the installation of the single 15 MW and the installation of the 20 MW farm was most economical.

• Environmental and Resource Economics Review
• /
• v.33 no.3
• /
• pp.291-314
• /
• 2024

The International Maritime Organization (IMO) has strengthened environmental regulations, leading to an increase in demand for LNG-powered ships. To enhance the competitiveness of ports and promote the use of LNG-powered ships, establishing LNG bunkering infrastructure is necessary. However, no ports in Korea currently have such infrastructure. This study used the 2015 regional input-output table to examine the economic impact of establishing LNG bunkering infrastructure in Busan Port, the largest port in Korea. The estimated cost of the project in 2023 was KRW 21.09 billion. The average production, value-added, and employment inducement coefficients were 1.223, 0.372, and 7.58, respectively.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.1
• /
• pp.153-180
• /
• 2020

This study is meaningful in finding out what legal and policy issues need to be improved in order to foster the aircraft industry, which is relatively underdeveloped compared to the fact that some heavy industries, such as the automobile industry and shipbuilding industry, have achieved a high level of production and technology globally. Korea's aircraft industry has been growing at a slower pace than other industries, largely due to the country's economic growth and the lack of a market structure to properly use variables such as the level of development in related industries, aircraft technology and demand for aircraft manufacturing. While most industries are privately led by the market structure of the competition system, heavy industries such as the aircraft industry generally grow under the market structure of the incomplete competition system, because only by securing huge initial investment costs, high technology, and sufficient demand, they can maintain minimum economic feasibility. The Korean aircraft industry was focused on developing and mass-producing military aircraft focusing on military demand, but it sought to turn the tide by signing the BASA (Bileral Aviation Safety Agreement) with the U.S. A preliminary feasibility study was conducted in 2010 to develop next-generation medium-sized aircraft, but was cancelled due to differences in position with Canada's Bombardier, which is subject to the concourse, and Korea Aerospace Industries (KAI) is pushing for the production of Bombardier's Q400 license on its own. Compared to the mid-to-large sized civil aircraft that are facing difficulties in development, KAI and KARI are successfully developing technologies to unmanned aerial vehicles and civil helicopters. In addition, the unmanned aerial vehicle sector is not yet suitable for manufacturers that have an exclusive global influence, so we believe that it is necessary to pursue government-led research and development projects with a focus on the areas of commercial helicopters and unmanned aerial vehicles in order to foster the aircraft industry in the future. In addition, since military aircraft such as KT-1 and T-50 are currently being exported smoothly, and it cannot be overlooked that the biggest demand for aircraft manufacturing in the Korea is the military, it is necessary to push forward national R&D projects and defense R&D program simultaneously to enable both civilian-military development. However, there are many differences between the two projects in the way they are implemented, the department in charge and the royalty system. Through this study, we learned about the technology ownership and implementation rights of national R&D projects and defense R&D programs, as well as the royalty system. In addition, problems with the system were identified and improvement measures were derived.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.363-371
• /
• 2023

To construct a ship, blocks of various sizes must be moved and erected . In this process, lugs are used such that they match the block fastening method and various functions suitable for the characteristics of each shipyard facility. The sizes and shapes of the lugs vary depending on the weight and shape of the block structures. The structure is reinforced by welding the doubling pads to compensate for insufficient rigidity around the holes where the shackle is fastened. As for the method of designing lugs according to lifting loading conditions, a simple calculation based on the beam theory and structural analysis using numerical modeling are performed. In the case of the analytical method, a standardized evaluation method must be established because results may differ depending on the type of element and modeling method. The application of this ambiguous methodology may cause serious safety problems during the process of moving and turning-over blocks. In this study , the effects of various parameters are compared and analyzed through numerical structural analysis to determine the modeling conditions and evaluation method that can evaluate the actual structural response of the lug. The modeling technique that represents the plate part and weld bead around the lug hole provides the most realistic behavior results. The modeling results with the same conditions as those of the actual lug where only the weld bead is connected to the main body of the lug, showed a lower ulimated strength compared with the results obtained by applying the MPC load. The two-dimensional shell element is applied to reduce the modeling and analysis time, and a safety working load was verified to be predicted by reducing the thickness of the doubling pad by 85%. The results of the effects of various parameters reviewed in the study are expected to be used as good reference data for the lug design and safe working load prediction.