• Journal of the Korea Convergence Society
• /
• v.7 no.4
• /
• pp.191-198
• /
• 2016

As the electricity produced from the electricity industry, a national key industry in Korea, are supplied to other industries as an intermediate goods, the supply shortage of electricity industry has a large impact on the national economy. This paper attempts to analyze the supply shortage effects which are defined as the negative impact of one won of supply failure in the electricity on the production of other industries. To this end, an input-output analysis using an input-output (I-O) table describing inter-industry flow of intermediate goods is applied. More concretely, the supply-driven model is applied subject to the OECD countries. The value of the supply effects interfere with Denmark's best large 1.682 was followed by South Korea, Japan, Australia, the UK.

• Explosives and Blasting
• /
• v.28 no.2
• /
• pp.69-75
• /
• 2010

Excavations by blasting in urban area have caused lots of complaints. Hence, special attentions need to be paid to controlling the ground vibrations in designing blasting for those areas. In this study, among the various parameters that can affect the propagation characteristics of ground vibrations, the effect of the priming location of explosive on the ground vibration level was studied for two types of emulsion explosives that had different detonation velocities. Three priming locations of top, middle, and bottom were considered in a charged hole. In the experiment on the effect of detonation velocity, the ground vibration caused by the explosive with a lower detonation velocity showed larger attenuation in the amplitude. The priming locations also affected the ground vibrations levels. The ground vibration level produced from middle priming was found to be larger than the other priming methods under the same blast conditions, but the attenuation of amplitude was also larger in this case. In contrast, the ground vibration level from bottom priming was not larger than the middle priming, but the attenuation was smaller so that the ground vibration was detected at a longer distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.914-920
• /
• 2006

In this paper, we introduce a new partial transmit sequence (PTS) orthogonal frequency division multiplexing (OFDM) scheme with low computational complexity. In the proposed scheme, $2^n$-point inverse fast Fourier transform (IFFT) is divided into two parts. An input symbol sequence is partially transformed using the first l stages of IFFT into an intermediate signal sequence and the intermediate signal sequence is partitioned into a number of intermediate signal subsequences. Then, the remaining n - l stages of IFFT are applied to each of the intermediate signal subsequences and the resulting signal subsequences are summed after being multiplied by each member of a set of W rotating vectors to yield W distinct OFDM signal sequences. The one with the lowest peak to average power ratio (PAPR) among these OFDM signal sequences is selected for transmission. The new PTS OFDM scheme reduces the computational complexity while it shows almost the same performance of PAPR reduction as that of the conventional PTS OFDM scheme.

• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.552-557
• /
• 2009

One-time passwords are used just once and discarded, which makes it more secure than the repeatedly used conventional passwords. This paper proposes a challenge-response based one-time password generator on a user's mobile phone always carried with the user. The generator can provide an additional authentication for a user to issue a money transfer request within his Internet banking session on a PC. A currently used device for Internet banking generates a password that changes every 30 seconds or so, which allows a man-in-the-middle to use it for stealing money within the 30 seconds. Unlike such a device, the proposed generator resists against the man-in-the-middle attack by a novel challenge-response scheme, provides better accessability and protection against stolen devices. As the currently used devices do, it prevents any unauthorized transfer even if the victim's all other credentials are revealed through his PC infected with spyware such as a keyboard logger.

• Journal of Satellite, Information and Communications
• /
• v.8 no.3
• /
• pp.1-5
• /
• 2013

In this paper, we present a conversion algorithm of the oblique ionogram obtained from Jeju and Icheon to the equivalent vertical ionogram of the path mid-point, based on some equivalence theorems between the vertical sounding and the oblique sounding for the ionosphere. And in order to verify the conversion algorithm under the condition of no vertical ionosonde at the mid-point on the test path, the equivalent vertical ionograms are compared to the real vertical ionograms measured adjacently in space-time. The comparison results show that the conversion algorithm performs well for the short-path oblique ionogram and the equivalent vertical ionograms could be applied to get the electron density profiles at the mid-point.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.248-255
• /
• 2002

An RF module in compliance with the IEEE 802.11a standard has been designed and its performance has been measured. Conventional heterodyne architecture with 580MHz intermediate frequency has been realized. Measurement results show that the receiver has a low Noise Figure of 5dB, the maximum gain of 70dB, and dynamic range as wide as 61dB. Also, the SAW filter used for channel selection in the IF section allowed minimum inter-channel interference. in addition to satisfying the RF output power requirement, the transmitter features its output P1dB as high as 34dBm so that the high peak-to-average ratio of the Orthogonal Frequency Division Multiplexing (OFDM) modulation scheme can be handled with minimum nonlinear distortion. The output P1dB of 34dBm of the transmitter corresponds to back-off powers of 18dB and 11dB with respect to the output power for the low and the middle frequency bands, respectively.

• Journal of Broadcast Engineering
• /
• v.4 no.1
• /
• pp.59-67
• /
• 1999

In this paper, we study two important topics in stereoscopic image communication system. One is a disparity estimation (DE) method to obtain the depth information of a scene at the transmitter and the other is an intermediate view reconstruction(IVR) method at the receiver. We propose a new DE method using an edge-preserving directional regularization technique. The proposed DE method smooths disparity vectors in smooth regions and preserves edges without over-smoothing problem. It provides better reconstructed stereoscopic images and improved coding efficiency than the existing regularization techniques. In addition. we propose a new IVR method using interpolation and extrapolation techniques. The proposed IVR method preserves edge regions as well as occlusion regions well. Thus. it gives better intermediate views than the existing IVR methods.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.23-28
• /
• 2019

Cloud services are services developed to serve a wider variety of users in different fields. However, although cloud services are designed to reflect the needs of different users, a variety of security damages resulting from them are increasing and technologies are needed to address them. This paper proposes a user signature management model that prevents third parties from exploiting the user's signature in a heterogeneous cloud The proposed model strengthens the functionality of the intermediate devices that make up the hierarchical cloud while also managing the signature information of the partitioned user. As a result of the performance assessment, the proposed model not only distributed user signature management, but also improved efficiency by 8.5% on average because intermediate devices distributed user signature processing, and reduced the user's signature latency by 13.3% on average when performing user authentication processing. On average, the overhead generated by intermediate devices processing a user's signature was 10.1 percent lower than that of conventional techniques.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.422-428
• /
• 2011

This paper presents results from the theoretical analysis of the lateral load distribution for a railway bridge designed with PSC girders which is one of most popular types of bridge in Korea. Typically, 3 sets of intermediate cross beams within a span have been installed for lateral load distribution. In this paper, the effect on the lateral load distribution by the number of intermediate cross beams were examined by both simple grillage analysis and finite element method. This study showed that at least, one set of cross beams at midspan should be needed to ensure the proper load distribution. However, the effect of cross beams on the load distribution becomes not significant though more than one set of cross beams are installed. Therefore, only one set of cross beans at midspan is recommended for constructibility and economic efficiency.

• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.411-419
• /
• 2007

Mounted on mobile device, set-top box, or digital TV, EVM is a virtual machine solution that can download and execute dynamic application programs. And the SIL(Standard Intermediate Language) is intermediate language of the EVM, which has a set of opcodes for object-oriented language and a sequential language. Since the C compiler used on each platform depends on the hardware, it converts C program to objective code, and then executes. To solve this problem, our research team developed ANSI C compiler and the EVM. Our ANSI C compiler outputs the SIL code based on stack machine. This paper presents the SIL-to-C decompiler in which converts the SIL code to three address code. Thus, the decompiler allows us to verify SIL code created by ANSI C compiler, and analyze a program from C language source level.