• Proceedings of the KSEEG Conference
• /
• 2002.10a
• /
• pp.31-52
• /
• 2002

국내광업은 ‘90년대 이후 석탄산업합리화조치와 국제금속광물시장 가격안정화로 그 동안 광업을 주도한 석탄산업과 금속광업은 급격히 위축되는 한편, 산업원료의 수요증가 추세에 힘입어 비금속광물 개발은 비교적 활발한 상태이다. 이와 같이 국내 광업의 주긴 영역이 석탄광과 금속광에서 비금속광 중심으로 개편되고 있으나, 현재 가행중인 비금속광은 고품위광체 확보 미흡, 고부가가치 기술낙후 등으로 고가의 주요 산업원료는 주로 수입에 의존하고 있는 실정이다. 따라서 국내광업으로서는 비금속광 중심의 단순한 원광식 생산$\cdot$판매체계를 고부가 산업으로 전환시키기 위한 전략적인 방안이 필요한 시기이다. 본 발표문은 이러한 국내광업의 향후 발전방향을 모색하기 위하여 국내 광업이 국가 경제에서 차지하는 영역을 중심으로 $\boxDr$광업동향$\boxUl$ $\boxDr$광업의 국내$\cdot$외 환경분석$\boxUl$ $\boxDr$광업의 경제활동 현황$\boxUl$ $\boxDr$광업의 경제적 위치와 역할$\boxUl$로 분류하여 자료분석을 실시하였으며, 분석한 자료를 토대로 국내광업의 중요성과 당면과제를 도출하고 이에 따른 광업의 새로운 역할을 제시하고자 하였다. 국내광업은 각종 지표에서 나타난 바와 같이 여러 가지 구조적인 문제점으로 인해 개발에 어려움을 겪고 있지만 각종 산업원료의 중간재 공급원으로서의 전통적인 역할을 충실히 담당하고 있는 것으로 분석되었다. 그러나 과학기술의 급격한 발달, 소비패턴의 변화, 생활환경과 삶의 질을 중시하는 새로운 가치관의 확산 등으로 광업의 역할도 새로운 변화의 전기를 맞이하고 있음을 볼 수 있다. 국내광업이 21C 급변하는 산업환경에 적응하여 생존하기 위해서는 각종 첨단산업에서 요구하는 소량 다품종의 원료광물을 적기에 공급 할 수 있는 전문화된 기술력을 하루속히 확보해야 하며, 이를 위해 고품위의 원료광물 확보를 위한 탐사 및 개발을 적극 추진하고 가공기술의 선진화를 위해 선진국과의 기술제휴 등 자원산업 글로벌화 정책이 절실히 요구되고 있음을 알 수 있다 또한 삶의 질을 향상시키려는 현대인의 가치관에 부합하기 위해서는 각종 소비제품의 원료를 제공하는 광업의 본래 목적 이외에도 자연환경 훼손을 최소화하며 개발 할 수 밖에 없는 구조적인 어려움에 직면할 수 밖에 없다. 이처럼 국내광업이 안고 있는 여러 가지 난제들을 극복하기 위해서는 업계와 정부가 합심하여 국내광업 육성의 중요성을 재인식하고 새로운 마음가짐으로 관련 정책을 수립 일관성있게 추진해 나가야 할 것으로 보인다.

• Journal of Plant Biotechnology
• /
• v.29 no.1
• /
• pp.15-18
• /
• 2002

Callus and shoot formation of leaf explants from in vitro propagated shoots and field grown plants depending on the position of leaf, and four boxthron cultivars were investigated. Callus formation of explants from both in vitro shoot and field grown plants as easily achieved at the cut surfaces of explants but the callus formed from leaf of in vitro shoots was hardened as the duration of culture was proceed. Calli were effectively induced from leaves detached from the middle position of both in vitro and in vitro plants on MS medium containing 0.5 mg/L NAA with 0.2 mg/L BA, and the growth of calli were better in field grown leaves than in vitro grown leaves. Shoot formation were effectively induced from leaves detached from the upper position in vitro plants, and the middle parts of in vitro plants on MS medium containing 0.01 mg/L (NAA with 0.2 mg/ BA. There was difference on the frequency of shoot formation among four different cultivars; 'Jindojaerae' was the best for shoot formation followed by 'Cheonyang', 'Younghagukija' and 'Cheongyangjaerae'.

• Fire Science and Engineering
• /
• v.32 no.3
• /
• pp.76-87
• /
• 2018

This study describes the damage effects modeling for a quantitative prediction about the hazardous distances from pressurized chlorine saturated liquid tank, which has two-phase leakage. The heavy gas, chlorine is an accidental substance that is used as a raw material and intermediate in chemical plants. Based on the evaluation method for damage prediction and accident effects assessment models, the operating conditions were set as the standard conditions to reveal the optimal variables on an accident due to the leakage of a liquid chlorine storage vessel. A model of the atmospheric diffusion model, ALOHA (V5.4.4) developed by USEPA and NOAA, which is used for a risk assessment of Off-site Risk Assessment (ORA), was used. The Yeosu National Industrial Complex is designated as a model site, which manufactures and handles large quantities of chemical substances. Weather-related variables and process variables for each scenario need to be modelled to derive the characteristics of leakage accidents. The estimated levels of concern (LOC) were calculated based on the Gaussian diffusion model. As a result of ALOHA modeling, the hazardous distance due to chlorine diffusion increased with increasing air temperature and the wind speed decreased and the atmospheric stability was stabilized.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.219-219
• /
• 2016

기후변화에 따른 청미천 유역의 가뭄 특성을 평가한 연구로 가뭄의 발생은 여러 요소가 연속적인 상관관계를 이루고 있으며, 가뭄지수 산정에 내재되어 있는 복잡성 및 불확실성으로 인해 다양한 가뭄지수를 적용하였다. 그 중 기상학적 가뭄지수는 강수량을 이용하여 산정하는 SPI(Standardiz d Precipitation Index)와 강수량과 증발산량을 바탕으로 산정하는 SPEI(Standardiz d Precipitation Evaportranspiration Index), 유효토양수분량을 바탕으로 산정하는 농업학적 가뭄지수인 PDSI(Palmer Drought Severity Index), 유출량을 이용하여 산정하는 수문학적 가뭄지수인 SDI(Streamflow Drought Index)의 지속기간 3개월, 6개월, 9개월에 따른 과거(1985년부터 2015년) 및 미래(2016년부터 2099년)의 가뭄특성을 파악하였다. 미래의 경우 기후변화 시나리오인 RCP(Representative Concentration Pathway) 4.5와 8.5를 이용하였으며, 농업학적 및 수문학적 가뭄지수는 SWAT(Soil and Water Assessment Tool) 모형 모의를 통해 산출된 결과를 토대로 산정하였다. 과거 기간의 가뭄지수 산정 결과, 2015년과 2014년이 극한 및 평균 가뭄의 평균에서 가장 극심한 가뭄을 나타냈으며, PDSI를 제외한 각 가뭄지수 간에는 높은 상관정도를 보였다. 과거를 포함한 미래 가뭄의 경우 현재(2011년부터 2020년까지), 가까운 미래(2021년부터 2040년까지), 중간 미래(2041년부터 2070년까지), 먼 미래(2071년부터 2099년까지)로 나누어 가뭄을 평가하였다. 평가 결과 현재의 경우 과거 기간의 가뭄과는 달리 2018년이 가뭄에 취약했으며, 극한 및 평균 가뭄의 평균에서 두 기후변화 시나리오는 가까운 미래와 중간미래가 취약함을 나타냈다. 상관계수의 경우 과거 결과와 마찬가지로 PDSI를 제외한 각 가뭄지수 간에 높은 상관정도를 나타냈다. 또한 빈도해석 결과 RCP 4.5에서 더 큰 변동성을 보였다. 현저히 적은 강수 및 기온 상승으로 인한 증발산량의 증가 등으로 인해 최근 들어 가뭄의 정도가 심해졌으며, 미래에는 더욱 더 심해질 전망으로 보여진다. 이를 평가하기 위해서는 본 결과에서 보듯이 각 각의 가뭄지수는 극한 가뭄의 발생 시기 및 강도에서 각기 다른 차이를 확인할 수 있기 때문에 가뭄 평가 시 다양한 형태의 가뭄지수 활용이 이루어져야 할 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.331-340
• /
• 2021

The blast damage behavior of reinforced concrete (RC) structures exposed to unexpected extreme loading was investigated. To enhance the accuracy of numerical simulation for blast loading on RC structures with seven blast points, the calculation of blast loads using the Euler-flux-corrected-transport method, the proposed Euler-Lagrange coupling method for fluid-structure interaction, and the concrete dynamic damage constitutive model including the strain rate-dependent strength and failure models was implemented in the ANSYS-AUTODYN solver. In the analysis results, in the case of 20 kg TNT, only the slab member at three blast points showed moderate and light damage. In the case of 100 kg TNT, the slab and girder members at three blast points showed moderate damage, while the slab member at two blast points showed severe damage.

• International Area Studies Review
• /
• v.14 no.1
• /
• pp.3-29
• /
• 2010

The purpose of this paper is to examine the transmission of domestic and foreign real and monetary disturbances into a small country with heavy imports of intermediate goods, and to analyze how the wage indexation in a small country affects the transmission of foreign disturbances into a small country. We consider the two countries, a small country and the rest of the world, two goods, and rational expectations world model under flexible exchange rate system with perfect capital mobility. We find out that foreign disturbances are transmitted into a small country through the price channel, the foreign output multiplier channel, and the nominal interest rate channel, and the foreign real balance channel. We have conducted an empirical investigation by using the Korean data for a small country and the U.S. data for a large country to see how real and monetary disturbances originating from the US affects the Korean economy with wage indexation.

• The Southeast Asian review
• /
• v.27 no.4
• /
• pp.41-76
• /
• 2017

This paper analyses the market shares and the export similarity indexes (ESI) of Korea, Japan and China in ASEAN, and then identifies the determinants of Korea's exports to ASEAN countries using single equation cointegration approaches, such as fully modified OLS (FMOLS), dynamic OLS (DOLS), and canonical cointegration regression (CCR). Various regression results are as follows: As expected, Korea's real exports tend to increase as importing country's GDP grows. The competing third country's currency depreciation affects Korea's exports differently from country to country. Most notably, it doesn't significantly affect Korean exports in Malaysia, Indonesia and Thailand. These results suggest that bilateral or third country exchange rates are not that important or decisive factors to determine Korea's exports to ASEAN countries in the long-run while economic growth in ASEAN countries matters most.

• Composites Research
• /
• v.33 no.6
• /
• pp.346-352
• /
• 2020

In mobility industries, the use of thermoplastic composites increased dynamically. In this study, the mechanical and impregnation properties of continuous glass fiber (GF)/polypropylene (PP) composite were evaluated with different GF contents. The GF/PP commingled fiber was manufactured with different GF contents and continuous GF/PP composite was manufactured using continuous compression molding process. Tensile, flexural, and impact test of specimens were evaluated with different GF contents. The fracture behavior of specimens was proved using field emission-scanning electron microscope images of fracture area and impregnation property was evaluated using dynamic mechanical analyzer and interlaminar shear strength. Finally, the GF/PP composite was the optimized mechanical and impregnation properties using 50 wt.% GF/PP commingled fiber.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.185-194
• /
• 2022

The software industry makes it possible to converge science and Information and Communication Technologies (ICT), create new markets, and create jobs. It is a key industry in the 21^st century knowledge and information age, which is growing very rapidly. This study uses Input-output analysis to derive Linkage effect of the software industry in Korea and the United States (US), and compares the result with CO₂ inducement effect to verify whether the industry meets the low carbon emission development strategy. As the result of this study, first, the software industries in Korea and the US are confirmed to have large influences on the national economy. Second, the Korean software industry has a low Forward linkage effect, so it is less affected by the output of other industries. On the other hand, in the US, it has a high Forward linkage effect and can induce a lot of output in others. Third, CO₂ inducement effects of the industry in Korea and the US are both low, confirming that the industry is suitable for a sustainable future.

• Economic Analysis
• /
• v.27 no.4
• /
• pp.43-69
• /
• 2021

As the trade linkages and the financial relationship between China and Korea grow stronger, China's influence on Korea is also growing larger. Therefore, it is meaningful to examine key features of Chinese monetary policy operations and the current situation, and to analyze the transmission mechanism of China's monetary policy shocks onto the Korea economy. China's monetary policy shocks can have an impact on the Korea economy through the trade, financial and oil-price channels. In the trade channel, an expansionary Chinese monetary policy can increase Korea's exports of intermediate goods to China under the vertical trade structure, via the vertical trade integration effect. Meanwhile, the expenditure switching effect and the income demand effect show no statistical significance. In the financial and oil-price channels, expansionary Chinese monetary policy shocks can decrease the interest rate and increase both stock prices and the consumer price index in Korea through changes in global portfolio capital flows, interest rates, and raw material prices.