• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.191.2-191.2
• /
• 2016

$TiO_2$는 우수한 화학적 및 물리적 안정성 때문에 수전해 장기간 사용에 적합한 전기화학 전극으로 여겨진다. 큰 표면적을 갖는 $TiO_2$를 제조하기 위한 수많은 방법 중 양극산화(anodization)는 비교적 간단하고 저렴한 공정으로 인하여 매우 실용적인 방법으로서 알려져 있다. 특히, 고도로 정렬 된 $TiO_2$ 나노튜브($TiO_2$ NTs) 의 경우에는 분말상과 달리 전극제조를 위해 추가적인 접착제를 필요하지 않다. 그러나, $TiO_2$는 일반적으로 절연 특성을 나타내기 때문에 전극의 활용을 위해서는 본질적으로 촉매의 사용이 불가피하다. 다수의 전기 촉매 중, $IrO_2$와 $RuO_2$는 수전해 분야에 잘 알려진 산화 촉매이다. 그럼에도 불구하고, 특유의 높은 종횡비 때문에 $TiO_2$ 나노튜브에 전기 촉매를 균일하게 도핑하는 것은 많은 어려움이 따른다. 이를 해결하기 위한 방법으로 $RuO_2$를 도핑하기 위한 단일공정 $TiO_2$ 양극산화 기술이 보고된 바 있다. 본 연구에서는 2원 촉매($IrO_2$ 및 $RuO_2$)를 $TiO_2$ 나노튜브에 도핑하기 위한 단일공정 양극산화 기술에 대하여 연구하였다. 전구물질로써 $KRuO_4$($RuO_2$ 전구체)와 IrOx 나노입자(IrOx NPs, $IrO_2$ 전구체)를 사용하였다. 특히, IrOx를 나노 입자는 $IrCl_3$로부터 중간 매체로 합성된다. IrOx는 단일공정 양극산화 중에 $TiO_2$ 나노튜브 상에 도핑 가능한 이온 형태인 $IrO_4$-로 전환될 수 있다. 제조된 시료는 열처리 후 바로 전극으로 사용되었으며 SEM, XPS, TEM, ICP-OES 등으로 정성, 정량 분석을 수행하였다. LSV와 EIS를 통해 전기화학적 성능 평가가 이루어졌으며, LSV를 통해 포집한 기체는 가스 크로마토그래피를 사용하여 정량분석한 후 그 효율을 측정하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.83-88
• /
• 2019

LiBaPO₄:Eu²⁺ phosphors with stoichiometric and nonstoichiometric compositions were prepared using a solid state reaction followed by heat treatment in reduced atmosphere, and the crystal structures and photoluminescence(PL) properties of the powders were investigated by x-ray powder diffraction and luminescence spectrometer. At 900℃, the Ba₃(PO₄)₂ phase as the intermediate phase was observed with the LiBaPO₄ phase as the main crystalline phase. Samples with a low europium concentration at 1,000℃ belonged to the trigonal structure, whereas samples with Eu²⁺ content more than 4 mol% showed monoclinic structure. In the nonstoichiometric compositions of 4 mol% Eu²⁺ and above, a single phase of Eu²⁺-doped LiBaPO₄, showing bluish green emission, was formed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.74-74
• /
• 2000

낮은 유전상수(k$\leq$3)와 높은 열적안정성(>4$25^{\circ}C$)은 초고집적회로(ULSI)기술에서 RC 지연을 해결하기 위한 금속배선의 중간 절연층으로서의 2개의 가장 중요한 특성이다. 본 연구에서는 cyclohezane을 precursor로 사용하여 plasma enhanced chemical vapor deposition(PECVD)방법으로 유기박막을 성장시켰으며 낮은 유전상수와 높은 열적안정성을 동시에 확보하기 위하여 열적안정성은 좋지 않지만 유전상수가 낮은 박막(soft layer)위에 유전상수는 다소 높지만 열적안정성이 좋은 박막(hard layer)을 얇게 증착하여 hard layer/soft layer의 2층 구조를 형성하여서 구조적, 전기적 특성을 조사하였다. 유기박막은 5$0^{\circ}C$로 유지된 reactor 내부에서 argon(Ar) plasma에 의해 증착되었으며 platinum(Pt)기판과 silicon 기판위에 동시에 증착하였다. Pt 기판위에 증착한 시편으로 유전상수, I-V 등 전기적 특성을 측정하였고, silicon 기판위에 증착한 시편으로 열적안정성과 구조적 특성등을 분석하였다. 증착압력 0.2Torr에서 plasma power를 5W에서90W로 증가할 때 유전상수는 2.36에서 3.39로 증가하였으며 열적안정성은 90W에서 180W로 증가하였을 때 유전상수는 2.42에서 2.79로 증가하엿고 열적안정성은 모두30$0^{\circ}C$이하였다. 단일층 구조에서는 유전상수가 낮은 박막은 열적으로 불안정하고 열적 안정성이 좋은 박막은 유전상수가 다소 높은 문제가 나타났다. 이런 문제를 해결하기 위하여 2 Torr, 120W에서 증착한 유전상수가 2.55이고 열적으로 불안정한 박막을 soft layer로 5150 증착하고 그 위에 0.2Torr, 90W에서 증착한 유전상수가 3.39이고 열적으로 45$0^{\circ}C$까지 안정한 박막을 hard layer로 360 , 720 , 1440 증착하였다. 증착된 2층구조 박막의 유전상수는 각각 2.62, 2.68, 2.79이었으며 열적안정성 측정에서는 40$0^{\circ}C$까지 두께 감소가 보이지 않았다. 그러나 SEM 측정에서 열처리 후 표면이 거칠어지는 현상이 발견되었다.

• Korean Journal of Food Science and Technology
• /
• v.50 no.6
• /
• pp.581-586
• /
• 2018

Enterococcus spp. have been considered major indicator organisms for antibiotic resistance due to their ability to easily acquire and to harbor antibiotic resistance. In this study, Enterococcus spp. were isolated from 174 retail fresh-cut products (fresh vegetable salads, microgreens, and sprouts) in Korea. Among the 20 Enterococcus isolates obtained, 18 (90.0%) were Enterococcus faecalis and 2 (10.0%) were Enterococcus faecium. The patterns of antibiotic resistance against nine antimicrobials were analyzed. Most of the isolates (85.0%) were resistant to quinupristin/dalfopristin, 40.0% and 50.0% of the isolates showed intermediate resistance to two critically important antimicrobials for human medicine, ciprofloxacin and erythromycin, respectively. Vancomycin-resistant enterococci were not detected in this study. Given the importance of antimicrobial resistance of enterococci in food safety as well as in public health, our results regarding the occurrence (level of contamination) and antimicrobial resistance of Enterococcus spp. could provide useful information that aids the risk analysis of antibiotic resistance.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.407-417
• /
• 2020

The capacity of the designated landfill site for asbestos-containing waste is approaching its limit because the amount of asbestos-containing slate is increasing every year. There is a need for a method that can safely and inexpensively treat asbestos-containing slate in large capacity and at the same time recycle it. A cement kiln can be an alternative for heat treatment of asbestos-containing slate. We intend to develop a pilot scale device that can simulate the high temperature environment of a cement kiln using a high temperature plasma reactor in this study. In addition, this reactor can be used to inactivate asbestos in the slate and to synthesize one of the minerals of cement, to confirm the possibility of recycling as a cement raw material. The high-temperature plasma reactor as a pilot scale experimental apparatus was manufactured by downsizing to 1/50 the size of an actual cement kiln. The experimental conditions for the deactivation test of the asbestos-containing slate are the same as the firing time of the cement kiln, increasing the temperature to 200-2,000℃ at 100℃ intervals for 20 minutes. XRD, PLM, and TEM-EDS analyses were used to characterize mineralogical characteristics of the slate before and after treatment. It was confirmed that chrysotile [Mg3Si2O5(OH)4] and calcite (CaCO3) in the slate was transformed into forsterite (Mg2SiO4) and calcium silicate (Ca2SiO4), a cement constituent mineral, at 1,500℃ or higher. Therefore, this study may be suggested the economically and safely inactivating large capacity asbestos-containing slate using a cement kiln and the inactivated slate via heat treatment can be recycled as a cement raw material.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.11
• /
• pp.1597-1603
• /
• 2011

The influence of heat-moisture treatment (HMT) and substitution of rice flour containing different amylose contents on the quality characteristics of rice noodles was investigated. HMT was applied to rice flours with 21% moisture content at 100 and 105$^{\circ}C$ for 30 min. Three rice cultivars were used, including high amylose of Goami (GM) and intermediate amylose of Choochung (CC) as domestic rice flours and imported rice of Taeguk (TG) as a control. HMT and substitution of rice flour with different amylose contents affected the cooking and texture quality of rice noodles. When rice noodles were made of intermediate amylose rice flour with HMT, cooking properties improved with decreased cooking loss and cooking water turbidity and thus were closer to those of control. Especially, the hardness, adhesiveness, tensile strength, and darkness of rice noodles notably increased when HMT rice flour was used. Based on the results of quantitative descriptive analysis for selected rice noodles, the noodles made of HMT CC at 105$^{\circ}C$ (CC105) had high scores for resilience and adhesiveness and low scores for hardness compared with imported commercial rice noodles and other experimental noodles such as TG, HMT GM100, TG+CC, and TG+CC105. In conclusion, rice noodles were made of composite flours containing high amylose and intermediate amylose contents or HMT intermediate amylose content rice flour.

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.419-426
• /
• 2016

The research is done to analyze the change of personal dosimeter according to the elapsed times(24 hours, 1 week, 2 weeks, 3 weeks, 4 weeks) and magnetic field and find out the effective exposure treatment for radiation workers. At first, research the heat treatment and radiation of grouped TLD and keep them in different environments-exposed separately to observe the consequences of glow curve and the level of radiation exposure. As a result, we could find that 24 hours passing TLD group showed the difference in glow curve and the level of radiation. This can be considered as the change caused by magnetic exposure. Also the average radiation exposure level of TLD group, unexposed to the magnetic field, was 15.41 mSv. And the average radiation exposure level of TLD group, exposed to the magnetic field, was 14.83 mSv which decreased the biggest amount(3.80%) among the other groups. If a radiation worker, who works in PET-MRI room, uses TLD as a personal dosimeter, the level of real radiation exposure caused by exposure to the magnetic field won't change significantly as recorded at a regular record cycle but with not regular record but interim record, the lower exposure dose will be appeared than the real level of radiation.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.216-224
• /
• 1997

Porous silica ceramics were prepared(with HCI catalyst) using H2O/TEOS molar ratios of 2.6~59.0, with the EtOH/TEOS ratio fixed. After preparing 9 kinds of sol, the followings were investigated; measurement of the gelation time, thermal analyses by TG/DTA, property analyses of the intermediates by FT-IR and X-ray diffractometry with dried samples, analyses of SiO2 polymer by FT-IR, the investigation of specific sur-face area and pore size distribution by N2-adsorption isotherm, and structural change of SiO2 polymer and pore morphology by TEM observation, with samples heat-treated to 50$0^{\circ}C$. In the concentrations of in-vestigated compositions and catalyst, gelation time showed a minimum at ca. 11 moles of water per one mole of TEOS, the highest degree of polymerization at ca. 8-18 moles, and the largest specific surface area at ca. 11 moles, which means that the polymerization proceeded fastest at ca. 11 moles of water. In con-clusion, the more water used, the faster the polymerization reaction up to ca. 11 moles, but more than ca. 11 moles of water caused retardation of gelation and resultant reduction of specific surface area.

• Korean journal of applied entomology
• /
• v.11 no.2
• /
• pp.55-60
• /
• 1972

The study has been carried to investigate the nature of resistance in rice varieties against bacterial leaf blight caused by Xanthomonas oryzae (Uyeda et. Ishiyama) Dowson. In this study, differences on several morphological histological and bacterial growth in rice leaf extract from different varieties were examined. Shirogane and Norm 6 as resistant varieties, Paldal as moderately resistant, and Jinheung, Kimmaze and Suwon 213 as susceptible varieties were used throughout the experiment. 1. Susceptible varieties Jinheung, Kimmaze have more hydathods in flag leaf than resistant varieties but there were no difference between resistant varieties and moderatly resistant varieties. 2. Average length of xylem vessel elements were 50r longer in leaf veins of susceptible varieties Jinheung, Kimnaze and Suwon 213 than those of resistant varieties, but there were no difference among Paldal, Norm 6 and Shirogane. 3. Kimmaze and Suwon 213 have larger diameter of xylem vessel elements than those of other varieties examined. However, it did not differ significantly between resistant varieries and susceptible varieties statistically. 4. Jinheung and Kimmaze have more secondary xylem vessels in root of 6-7th leaf stage than those of Shirogane and Norm 6. Suwon 213, however, showed least number of secondary xylem vessels exceptionally. 5. Leaf extract from resistnat variety Shirogane, suppressed bacterial growth significantly when compared with those from other varieties. 6. Bacterial growth in autoclaved leaf extract from resistant varieties and susceptible varieties did not show any noticeable difference. In general, fresh extract maintained more bacteria than in autoclaved extract after 48 hours of incubation period.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.67-72
• /
• 1992

The growth of Ti on Si(111)-$7{\times}7$ and the formation of epitaxial C54 $TiSi_2$ were investigated by using reflection high energy electron diffraction(RHEED) and high resolution transmission electron microscopy(HRTEM). Polycrystalline Ti layer is grown on the amorphous Ti-Si interlayer which is formed at the Ti/Si interface by Ti deposition on Si(111)-$7{\times}7$ at room temperature (RT). HRTEM lattice image and transmission electron diffraction(TED) showed that epitaxial C54 $TiSi_2$ grown on Si substrate with 160 ML of Ti on Si(111)-$7{\times}7$ surface at RT, followed by annealing at $750^{\circ}C$ for 10 min in UHV. Thin single crystal Si overlayer with [111] direction is grown on $TiSi_2$ surface when $TiSi_2$/Si(111) is annealed at ${\sim}900^{\circ}C$ in UHV, which was confirmed by Si(111)-$7{\times}7$ superstructure.