• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.225-236
• /
• 2013

The voice recognition has been made continuously. Now, this technology could support even natural language beyond recognition of isolated words. Interests for the voice recognition was boosting after the Siri, I-phone based voice recognition software, was presented in 2010. There are some occasions implemented voice enabled services using Korean voice recognition softwares, but their accuracy isn't accurate enough, because of background noise and lack of control on voice related features. In this paper, we propose a sort of multi-purpose preprocessor to improve this situation. This supports Keyword spotting in the continuous speech in addition to noise filtering function. This should be independent of any voice recognition software and it can extend its functionality to support continuous speech by additionally identifying the pre-predicate and the post-predicate in relative to the spotted keyword. We get validation about noise filter effectiveness, keyword recognition rate, continuous speech recognition rate by experiments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.223-229
• /
• 2014

The acoustic cleaning system is widely used to remove foreign materials in factories, such as thermal power plants and incinerators. However, the acoustic cleaning systems tend to be clogged by foreign materials. In this paper, we develop a wireless sensor network for the sound wave detection in order to monitor proper operations in the acoustic cleaning systems. We observe that the developed wireless sensor network for the wave detection shows a stable operation in various industrial environments of wide temperature ranges. We also develop a data gathering device, which displays the current status of the sound generator and several values detected from the wireless sensor.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.2
• /
• pp.12-26
• /
• 2014

This Study deals with effect of low visibility condition at nighttime on traffic accident. Roads for experiment of this study are Gyeongbu expressway, Seohaean expressway, Yeongdong expressway and Seoul beltway in Gyeonggi province. For this study, I subdivided basic straight section of them into 58 short section. And I analyzed effect of low visibility condition by darkness at nighttime on traffic accident by using 410 traffic accidents between January 1, 2009 and June 30, 2012 on those sections. The Quasi-experimental and negative binomial regression were applied to analyze effect of low visibility condition at nighttime on traffic accident. In this study, I only analyzed visibility difference of daytime and nighttime on traffic accident except other effective variables on traffic accidents. As a result, I have found that it is for low visibility condition at nighttime to have effect on traffic accidents at such specific conditions as Los A speed is maintained in basic straight section of expressway in fine weather. And I tried to do various analysis on types and causes of traffic accidents using the result of analysis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.7
• /
• pp.1033-1038
• /
• 2013

Petrochemical complex has been a lot of research for the development of a more mature product and analysis for mid-process and finished products is essential in these process. But these analyzes are still by hand work samples being manufactured in many parts. Moreover they are exposed to hazardous chemical and such as the analysis is being made in a very poor working conditions. In this paper, in order to solve such problems the multi control system has been developed for the automated analysis. In addition, the organic behavior of these systems and the development of a program for the automated applied, and throughout the experiment to verify the reliability of this device for the accuracy of the dosing pumps for the standard solution prepared with a range of error of ${\pm}0.01m{\ell}$ was able to get a very good experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.313-322
• /
• 2005

In this paper, High power factor electronic ballast using a double resonant Inverter for 250[W] MHD lamp is designed and implemented. Proposed electronic ballast is composed of configuration that is cascaded boost active PFC circuit as power factor corrector and half-bridge double resonant inverter Into two stage approach. Theoretical analysis of circuit and characteristics estimation is generally illustrated by using normalized parameter. To remove the phenomenon of acoustic resonance in the lamp, Simple frequency controller composed timer IC and driving IC is designed and employed on the ballast. The experimental results show that an high power factor electronic ballast using a double resonant inverter is operated stably.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.91-100
• /
• 2007

This paper presents the RF Shower System for increased read range on low power mobile RFID System with 20watts of power supply. From the experiment, by controlling the output power of shower system, the tripled read range between reader and Tag is possibly discovered. Thus we can expect on the significantly widen read range of RFID system by appropriate control of Shower Zone, though we only with the reader with its lower output power level of 20dBm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.4
• /
• pp.296-308
• /
• 2010

This paper proposes a design of the three-parallel converter system and grid-connection technique for a PMSG based wind turbine systems. The back-to-back converter of the PMSG based wind turbine system is directly connected to the grid so that both the power devices and the filters are needed to have large power ratings. The three-parallel converter configuration can reduce the required power ratings of the devices and filters. However, the three-parallel converter can cause circulating currents. These circulating currents can be suppressed by sellecting proper inner inductance at each leg. An LCL filter design is used to meet the THD regulations. The latent resonance caused by the LCL filter is compensated by an active damping method without additional loss. The decline of the power quality caused by the unbalanced and distorted grid voltages is also compensated with an additional compensation algorithm. The simulation and experimental results show that the proposed system and compensation methods are effective for the wind turbine systems.

• Analytical Science and Technology
• /
• v.16 no.1
• /
• pp.12-24
• /
• 2003

For the design and set-up of neutron induced prompt ${\gamma}$-ray spectroscopy system using $^{252}Cf$ neutron source, the effects of shielding and moderator materials have been examined. The $^{252}Cf$ source being used for TLD badge calibration in Korea Atomic Energy Research Institute was utilized for this preliminary experiment. The ${\gamma}$-ray background and prompt ${\gamma}$-ray spectrum of the sample containing Cl were measured using HPGe (GMX 60% relative efficiency) located at the inside of the system connected to notebook PC at the outside of the system (about 20 meter distance). The background activities of neutron and ${\gamma}$-rays were measured with neutron survey meter as well as ${\gamma}$-ray survey meters, respectively and the system was designed to minimize the activities. Prompt ${\gamma}$-ray spectrum was measured using ${\gamma}$-${\gamma}$ coincident system for reduce the background and the continuum spectrum. The optimum system was designed and set up using the experimental data obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.269-274
• /
• 2016

This paper proposes the development of a low frequency electronic hammer drive system that is used to prevent scaling or clogging in the hopper process. The electro-mechanical hammering driving method involves the generation of vibration and impact energy. The operation principles of the electromagnetic hammer were considered by parallel/series spring coefficient analysis and the amount of kinetic energy generated was calculated from the product of the equivalent spring constant, which is coupled with the E core and the gap of between the E core and I core. In addition, the Pulsation Driving algorithm was applied to the proposed electromagnetic hammer to obtain the maximizing kinetic energy. This algorithm was then implemented by a logical AND operation process and micro-controller (atmega128) built in functions with a timer interrupt and PWM generation function. The driving circuit of the electromagnetic hammer was designed using the H-bridge type IGBT circuit. The experimental test was performed by usefulness of the developed electromagnetic hammer systems with the acceleration measurement method. The experimental result showed that the proposed system has good kinetic energy generation performance and can be applied to the hopper process.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.43-50
• /
• 2019

Effects of tensile strength and aspect ratio of steel fiber on compressive and flexural behavior of steel fiber-reinforced concrete (SFRC) with high- and normal-strength were investigated. Also, this study explores compressive behavior of SFRC with different loading rate. For this purpose, four types of steel fiber were used for SFRC with specified compressive strength of 35 and 60 MPa, respectively. Cylindrical specimens with a diameter of 150 mm and height of 300 mm were made for compression test, and prismatic specimens with a $150{\times}150mm$ cross-section and 450 mm span length were made for flexural test. Test results from compression and flexural tests indicated that the toughness of concrete significant increased with steel fibers. Especially, using steel fiber with high tensile strength and aspect ratio can be lead to performance improvement of high-strength SFRC. In this study, equations are suggested to predict compressive toughness ratio of SFRC from flexural toughness ratio.