• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.432-440
• /
• 2015

Biochar, a by-product from pyrolysis of biomass, is a promising option to mitigate climate change by increasing soil carbon sequestration. This material is also considered to have potential to remediate a soil with heavy metal pollution by increasing the soil's adsorptive capacity. This study conducted the assessment of two biochars considering the climate change mitigation potential and heavy metal removal capacity at the same time. Two kinds of biochars (BC_Ch, TW_Ch) were prepared by pyrolyzing the biomass of burcucumber (BC_Bm) and tea waste (TW_Bm). The soils polluted with Pb were mixed with biochars or biomass and incubated for 60 d. During the incubation, $CO_2$, $CH_4$, and $N_2O$ were regularly measured and the soil before and after incubation was analyzed for chemical and biological parameters including the acetate extractable Pb. The results showed that only the BC_Ch treatment significantly reduced the amount of Pb after 60 d incubation. During the incubation, the $CO_2$ and $N_2O$ emissions from the BC_Ch and TW_Ch were decreased by 24% and 34% compared to the BC_Bm and TW_Bm, respectively. The $CH_4$ emissions were not significantly affected by biochar treatments. We calculated the GWP considering the production of amendment materials, application to the soils, removal of Pb, and soil carbon storage. The BC_Ch treatment had the most negative value because it had the higher Pb adsorption and soil carbon sequestration. Our results imply that if we apply biochar made from burcucumber, we could expect the pollution reduction and climate change mitigation at the same time.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.3
• /
• pp.144-157
• /
• 2022

Noble gases, which are chemically inert and behave conservatively in marine environments, have been used as tracers of physical processes such as air-sea gas exchange, mixing of water masses, and distribution of glacial meltwater in the ocean. For precise measurements of Ne, Ar, and Kr, we developed a mass spectrometric system consisting of a quadrupole mass spectrometer (QMS), a high vacuum preparation line, an activated charcoal cryogenic trap (ACC), and a set of isotope standard gases. The high vacuum line consists of three sections: (1) a sample extraction section that extracts the dissolved gases in the sample and mixes them with the standard gases, (2) a gas preparation section that removes reactive gases using getters and separates the noble gases according to their evaporation points with the ACC, and (3) a gas analysis section that measures concentrations of each noble gas. The ACC attached to the gas preparation section markedly lowered the partial pressures of Ar and CO₂ in the QMS, which resulted in a reduced uncertainty of Ne isotope analysis. The isotope standard gases were prepared by mixing ²²Ne, ³⁶Ar, and ⁸⁶Kr. The amounts of each element in the mixed standard gases were determined by the reverse isotope dilution method with repeated measurements of the atmosphere. The analytical system achieved precisions for Ne, Ar, and Kr concentrations of 0.7%, 0.7%, and 0.4%, respectively. The accuracies confirmed by the analyses of air-equilibrated water were 0.5%, 1.0%, and 1.7% for Ne, Ar, and Kr, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.45-51
• /
• 2003

Stereo bird's-eyes-view was prepared for 3-dimensional view of various forms of Jecheon city, and 3-dimensional simulation was applied to it so as to show it in moving pictures in spatial. In manufacturing stereo bird's-eyes-view, perspective technology was used in image-making technology, and the basic material images are prepared as fellows: used EOC Images from Arirang-1 satellite, created DEM whose error was optionally geometric corrected after drawn from the contour line of the map on a scale of l/5,000 manufactured by national geography institute as a national standard map, and classified road lines which were manufactured as a road layer vector file of a map on a scale of l/l,000 and then overlay it over the three dimensional image of target area. Especially for the connectivity with address system to be used in new address, an arterial road map on a scale of l/l,000 that had been manufactured to grant new address was used in maximum in road network structure data of city area in this study.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.255-259
• /
• 2003

The technique of birdeye image generation of terrain through the use of satellite digital images and digital maps are very important elements and have applications in planning establishment as well as the actual design of several construction work in complex fields. This paper studies stereo perspective image generation as a possibility through 3-dimensional analysis combined with digital elevation data and remotely sensed images. For this, first of all, ortho-images generated by very accurate GCP and DEM from contour file makes 3-dimensional terrain analysis possible and allows stereo-viewing at the highway construction planning sites. So, we developed the technical methods for the 3-dimensional approach on the planning sites of highways by use of perspective orthoimages. From this research diverse terrain analysis is possible through stereo perspective image generation, and can leads to various application in road construction through gain study results from access to realtime virtual spatial on the objects area in korea.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.7-12
• /
• 2004

The technique of birdeye image generation of terrain through the use of satellite digital images and digital maps are very important elements and have applications in fanning establishment as well as the actual design of several construction works in complex fields. This paper studies stereo perspective image generation as a possibility through 3-dimensional analysis combined with digital elevation data and remotely sensed images. For this, first of all, ortho-images generated by very accurate GCP and DEM from contour file makes 3-dimensional terrain analysis possible and allows stereo­viewing at the highway construction planning sites. So, we developed the technical methods for the 3-dimensional approach on the planning sites of highways by use of perspective orthoimages. From this research, diverse terrain analysis is possible through stereo perspective image generation, and can leads to various application in road construction through gain study results from access to realtime virtual spatial on the objects area in korea.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.19-25
• /
• 2012

GEO-KOMPSAT2 shall provide higher quality of image than the COMS and uses star tracker instead of earth sensor, which requires precise onboard orbit information. This requires precise on-ground orbit determination. For COMS, orbit determination is performed using the ranging data obtained from tracking system located in DAEJON. For accurate orbit determination of GEO-KOMPSAT2, KARI is building a secondary tracking station in CHUUK Islands. In this paper, the achievable accuracy of table based onboard orbit parameter generator which interpolates orbit data obtained from on-ground orbit determination using tracking data collected from two ground stations. Two types of approaches have been applied; covariance analysis and numerical analysis. By combining two analysis results, total orbit error has been estimated.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.15-20
• /
• 2005

Most of studies for the ground load and ground behavior of landing gear have been conducted with an assumption that the structure of landing gear was rigid body. The assumption of rigid body during design process results in many errors or discrepancy. High ground load occurs in 3 directions on the shock absorbing strut during landing. This ground load initiated high structural deformation. In this study, the flex-multi-body dynamics is applied to adapt flexible bodies, so the results of analysis can be described close to landing gears real behaviour.

• Nuclear Engineering and Technology
• /
• v.27 no.1
• /
• pp.141-153
• /
• 1995

SNU 1.5-MV 직렬형 반데그라프 가속기로부터 얻은 0.5~2.2 MeV He$^{++}$ 빔을 이용하여 러더포드 후방산란 분광법 (RBS, Rutherford Backscattering Spectrometry)으로 여러가지 시료의 표면적층을 분석하였다. 먼저 RBS 분석계통의 신뢰성을 확인하기 위하여 Micromatter사와 Charles Evans & Associates에서 제작한 14종 33개의 표준시료들에 대한 후방산란 실험을 수행하여, 각 층의 두께, 원소조성비 및 주입 이온의 깊이, 분포폭을 측정하였다. 결정된 이 값들은 제시된 값과 3% 이내로 일치하였다 이와 같이 본 RBS 분석계통의 신뢰성을 확인한 후, 분석을 의뢰받은 22종 87개의 시료에 대해, 빔에너지. 후방산란의 기하학적 구조 등의 최적 조건하에서 후방산란 실험을 수행하였다 그 결과, 분석가능한 두께의 한계를 벗어난 2종 3개의 시료를 제외한 나머지 모든 시료에 대해 각 층의 두께, 원소조성비 및 농도분포를 결정할 수 있었으며, 측정치의 통계오차는 8% 이내였다. 다양한 종류의 많은 시료들에 대한 표면적층 분석을 수행한 경험을 통하여, RBS 분석에서 신뢰도 높은 결과를 얻기 위해 분석계통에서 필수적으로 고려해야 할 요소들을 파악할 수 있었으며, 분석 결과에 대한 신뢰도는 분석 계통의 체계화뿐만 아니라 시료의 상태에 따라 크게 좌우됨을 알 수 있었다. 결론적으로 주의 깊은 시료준비와 RBS 분석계통의 최적화를 통해 신뢰도 높은 표면적층 분석이 가능함을 확인하였다.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.545-552
• /
• 2022

The number of patent application filing for a specific technology has a good relation with the technology's life cycle and future industry development on that area. So industry and governments are highly interested in forecasting the number of patent application filing in order to take appropriate preparations in advance. In this paper, a new method based on the bidirectional long short-term memory(LSTM), a kind of recurrent neural network(RNN), is proposed to improve the forecasting accuracy compared to related methods. Compared with the Bass model which is one of conventional diffusion modeling methods, the proposed method shows the 16% higher performance with the Korean patent filing data on the five selected technology areas.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.110-119
• /
• 2017

The agroclimatic indices are produced by statistical analysis based on primary climate data (e.g., temperature, precipitation, and solar irradiance) or driving agronomic models. This study was carried out to evaluate how selection of daily temperature for a climate normal (1983-2012) affected the precision of the agroclimatic indices. As a first step, averaged daily 0600 and 1500 LST temperature for a climate normal were produced by geospatial schemes based on topo-climatology ($365days{\times}1$ set, EST normal year). For comparison, 30 years daily temperature data were generated by applying the same process ($365days{\times}30sets$), and calculated mean of daily temperature (OBS normal year). The flowering date of apple 'Fuji' cultivar, the last frost date, and the risk of late frost were estimated based on EST normal year data and compared with the results from OBS normal year. The results on flowering date showed 2.9 days of error on average. The last frost date was of 11.4 days of error on average, which was relatively large. Additionally, the risk of the late frost was determined by the difference between the flowering and the last frost date. When it was determined based on the temperature of EST normal year, Akyang was classified as a risk area because the results showed that the last frost date would be the same or later than the flowering date in the 12.5% of area. However, the temperature of OBS normal year indicated that the area did not have the risk of a late frost. The results of this study implied that it would be necessary to reduce the error by replacing the EST method with the OBS method in the future.