• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.8
• /
• pp.611-620
• /
• 2018

For the past decades, the analytic model for distributed surface roughness has been developed to improve the accuracy of the icing simulation code. However, it remains limitations to validate the developed model and determine the empirical parameters due to the absence of the quantitative experimental data which were focused on the surface state. To this end, the experimental study conducted to analyze the ice covered surface state from a micro-perspective. Above all, the tendency of the smooth zone width which occurs near the stagnation point has been quantitatively analyzed. It is observed that the smooth zone width is increased as growing the ambient temperature and freestream velocity. Next, the characteristics of the ice covered surface under rime and glaze ice have been analyzed. For rime ice conditions, ice elements are developed as the opaque circular corn in the opposite direction of freestream. The height and interval of each circular corn are increased as rising the ambient temperature. For glaze ice conditions, numerous lumps of translucent ice can be observed. This is because the beads formed by gravity concentrate and froze on the lower surface.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.129-143
• /
• 2017

The shallow sediments in the southwestern Ulleung Basin consist of mass flow deposits such as slide/slump and debris flow deposits (DFD), caused by slope failure. These sediments are proven to be important in studying geological disaster and stability of the seafloor. In this paper, we analysised the flow accumulation and slope failure susceptibility of the Ulleung Basin on the basis of multi-beam data, collected in this area. We also studied the distribution pattern and the seismic characteristics of the DFD in the uppermost layer of the Ulleung Basin on the basis of seismic data. The slope susceptibility was calculated as the frequency ratio of each factors including slope, aspect, curvature and stream power index (SPI), which causes the slope failure. These results indicate that the slope failure is frequently to occur in the southern and western continental slope of the Ulleung Basin. The sediment flow (mass flow) caused by the slope failure converges to the north and northwest of the Ulleung Basin. According to the seismic characteristics, the uppermost layer in study area can be divided into four sedimentary unit. These sedimentary units develop from the south and southwest to the north and northwest in association with slope susceptibility and flow accumulation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.415-420
• /
• 2017

In this paper, an algorithm for object counting via a conveyor system using machine vision is suggested. Object counting systems using image processing have been applied in a variety of industries for such purposes as measuring floating populations and traffic volume, etc. The methods of object counting mainly used involve template matching and machine learning for detecting and tracking. However, operational time for these methods should be short for detecting objects on quickly moving conveyor belts. To provide this characteristic, this algorithm for image processing is a region-based method. In this experiment, we counted young abalone shells that are similar in shape, size and color. We applied a characteristic conveyor system that operated in one direction. It obtained information on objects in the region of interest by comparing a second frame that continuously changed according to the information obtained with reference to objects in the first region. Objects were counted if the information between the first and second images matched. This count was exact when young shells were evenly spaced without overlap and missed objects were calculated using size information when objects moved without extra space. The proposed algorithm can be applied for various object counting controls on conveyor systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.113-116
• /
• 1992

소음의 발생 원인은 공기역학적 측면과 구조적 측면으로 나누어지는데, 실제 로는 유동장에서 발생되는 음원과 구조물에서 발생되는 진동과의 상호 간섭 에 의해 보다 복잡한 형태로 발생된다. 음장 문제를 두가지 범주로 구분하면 첫째는 음원과 구조물과의 상호교란에 의한 산란문제(Scattering)와 둘째로 구조물의 자체 진동에 의한 음의 전파현상과 구조물내부에 회전체와 같은 음원이 존재하는 경우에 음의 전파를 관측하는 방사문제(Radiation)가 있다. 실제로 산업용 터빈이나 비행기 엔진 흡입구에서 발생되는 소음, 또는 자동 차의 배기구를 통해 발생되는 소음 그리고 엔진의 진동에 의한 구조적 소음, 기타 가전제품의 회전체(Fan & Motor)에 의한 소음은 방사(Radiation)의 문 제로서 중요 관심 과제이다 수치적 기법으로 근래에 많이 사용하는 방법으 로 BEM(경계요소법), FEM(유한요소법), FDM(유한차분법)이 있는데 본 연 구에서는 유한요소법을 이용하기로 한다. 지금까지는 주로 BEM을 통해서 Far-Field의 음향장을 해석하였지만 복잡한 형상을 갖는 구조물내부에서의 음향장 변화나 구조물 내부에 음원이 존재하는 경우 또는 구조물 자체가 갖 는 물리적 특성치 변화 즉 물체표면에서의 부분 진동문제의 음향장 해석에 있어서 가장 잘 대체해 나갈 수 있는 방법이 유한 요소법이라고 여겨진다. 본 연구에서는 2차원 또는 기하학적으로 축대칭인 3차원 Duct내부에 음원이 존재하는 경우 음원전파에 따른 Near-field와 far-field에서 음의 방향성을 예측하기 위해 먼저 기본적인 유한요소법에 의한 Robin 경계조건을 사용하 여 계산된 결과와 Infinite Element를 도입하여 계산할 결과를 비교하여, Infinite Element가 보다 효율적이며 타당한 결과를 얻음을 확인해 보기로 한다.다 복합적인 측면에서 치료에 임하여야 할 것으로 사료된다. with such configuration.trap with 2.88[eV] deep of injected space charge from the chathode in the crystaline regions. The origin of ${\alpha}$$_2$ peak was regarded as the detrapping process of ions trapped with 0.9[eV] deep originated from impurity-ion remained in the specimen during production process of the material, in the crystalline regions. The origin of ${\beta}$ peak was concluded to be due to the depolarization process of "C=0"dipole with the activation energy of 0.75[eV] in the amorphous regions. The origin of ${\gamma}$ peak was responsible to the process combined with the depolarization of "CH$_3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.663-676
• /
• 1996

Physical properties and textural parameters of thirty-five piston tore samples recovered from the southeastern coast of Korea (Korea Strait), were investigated using the autopycnometer. The physical properties (porosity, water content, wet bulk density, dry bulk density, gram density, and void ratio) were measured at rather uniform intervals along each core. Sediment texture (grain size, sand, silt, and clay contents) was also measured at the same subbottom depth. The measured and calculated results are; mean grain size $0.57\~8.09\phi(average:3.67\phi)$, porosity $26\~81\%\;(average:\;55\%)$, water content $16.7\~61.4\%(average:\;31.6\%)$, wet bulk density $1.37\~2.18g/cm^3\;(average:\;1.85g/cm^3)$, dry bulk density $2.55\~3.11g/cm^3\;(average:\;2.35g/cm^3)$, grain density $2.40\~3.10g/cm^3\;(average:\;2.85g/cm^3)$, and void ratio $0.56\~2.54$ (average: 0.94). The sediment texture generally coincides well with the bathymetry indicating the influence of Pleistocene-Holocene sea level changes. Also the contours of physical properties are closely related to the sediment texture. Fluctuation of physical properties are similar to the textural variation. It seems that sediment texture is a significant factor in determining physical property in this study area.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.341-346
• /
• 2013

Purpose: The purpose of this study was to evaluate whether a relationship exists between head posture and phoria, and usefulness in examining habitual head posture. Methods: Twenty two subjects (20 males and 2 females, mean age $23.6{\pm}2.7$ years) with abnormal phoria from participants randomized were enrolled in this study. For all subjects, testing included case history, cover test, refraction, phoria and vergence test. Habitual head posture (head posture, head tilt and face turn) was measured by Impression IST, and observed by examiners. Results: The abnormal head posture was revealed in some subjects with abnormal phoria. Spearman' correlation ($\rho$=0.524, p=0.045) showed significant correction between face turn and phoria at distance in 15 subjects with prism prescription. No significant relationship between head posture and phoria was found in subjects with abnormal phoria. The objective measurement and subjective observation of head posture showed insignificant correction but there was a distinct difference. The former was detail and the latter was discriminate. Conclusions: Presence of abnormal head posture was found in phoric subjects. The results indicate the need to observe habitual head posture at all major positions of gaze in phoria.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.155-161
• /
• 2009

Lithium secondary batteries have been widely used in the portable electric devices as power source. Recently it is expected that the realm of its applications expands to the markets such as energy storage medium of hybrid electric vehicle(HEV), electric vehicle(EV). Cathode active material is crucial in terms of performance, durability, capacity of lithium secondary batteries. It is urgent to develope the technology for mass production of cathode material to cope with the markets' demands in the near future. In this study, a calcination furnace running in real production line is modelled in 3D, and the thermal flow and gas flow after chemical reaction in the furnace is analyzed through numerical computations. Based on the results, it is shown that large volume of $CO_2$ gas is generated from chemical reaction. High concentration of $CO_2$ gas and it's stagnation is clearly found from the reactant containers in which the reaction occur to the bottom area of the furnace. It is also studied that 15% or more $CO_2$ mol fraction could affect to proper formation of $LiCoO_2$ through TGA-DSC analysis. The solutions to evacuate carbon dioxide from the furnace are suggested through the change of furnace design and operating condition as well.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.568-576
• /
• 2015

In this study, scenarios based on the leakage of highly compressed air and fire occurrence turned out to be high risks in an operation stage of CAES facility were constructed and estimated. By combining Bernoulli equation with momentum equation, an expression to calculate an impact force of a jet flow of compressed air was derived. An impact force was found to be proportional to the square of diameter of fracture and the pressure of compressed air. Four types of fire scenarios were composed to evaluate an effects that seasonal change and location of fire source have on the spread behavior of smoke. Smoke from the fire ignited in the vicinity of CAES opening descended more quickly below the limit line of breathing than one from the fire occurred 10 m away from CAES opening, which is expected to occur due to a propagation of wave front of smoke. It was shown that a rate of smoke spread of the winter fire is faster than one of the summer fire and smoke from the winter fire spreads farther than one of the summer fire, which are dependent on the direction of air flow into access opening. Evacuation simulation indicated that the required safe evacuation time(RSET) of the summer and winter fires are 262, 670 s each.

• The Journal of Engineering Geology
• /
• v.11 no.3
• /
• pp.327-337
• /
• 2001

To verify the characteristics of groundwater inflow accompanied by the tunnel excavation, the flow rate was measured before and after primary grouting. The relationship between the flow rate and fracture system was also analyzed. The initial flow rate was estimated as 120,990 m$^3$/day through six zones, which were characterized by a large amount of inflow before the primary grouting. After the primary grouting, although considerable amount of inflow was still recognized at the six zones, the flow rate was greatly reduced as 42,844 m$^3$/day. However, great recovery of water levels was not observed. Groundwater flow into the tunnel by excavation of the tunnel is mainly controlled by the fracture system that include faults and joints developed in the host rocks. Four sets of discontinuities affecting on the network of grondwater inflow in the study area were identified as follows: N60-85$^{\circ}C$ W.25$^{\circ}$SW/80$^{\circ}$SW(TSet 1), N40-50$^{\circ}$E.85$^{\circ}$SE/85$^{\circ}$NE(TSet 2), N10-20$^{\circ}$E.85$^{\circ}$SE(TSet 3), and N70-80$^{\circ}$E.80SE(TSet 4).

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.87-93
• /
• 2014

If one identifies the detailed distribution of pressure and axial velocity at a source plane, the position and strength of major noise sources can be known, and the propagation characteristics in axial direction can be well understood to be used for the low noise design. Conventional techniques are usually limited in considering the constant source characteristics specified on the whole source surface; then, the source activity cannot be known in detail. In this work, a method to estimate the pressure and velocity field distribution on the source surface with high spatial resolution is studied. The matrix formulation including the evanescent modes is given, and the nearfield measurement method is proposed. Validation experiment is conducted on a wide duct system, at which a part of the source plane is excited by an acoustic driver in the absence of airflow. Increasing the number of evanescent modes, the prediction of pressure spectrum becomes further precise, and it has less than -25 dB error with 26 converged evanescent modes within the Helmholtz number range of interest. By using the converged modal amplitudes, the source parameter distribution is restored, and the position of the driver is clearly identified at kR = 1. By applying the regularization technique to the restored result, the unphysical minor peaks at the source plane can be effectively suppressed with the filtering of the over-estimated pure radial modes.