• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.146-153
• /
• 2003

본 논문은 열차 곡선부 노선에서 발생하는 진동크기의 예측을 위한 것으로, 곡선부를 주행하는 틸팅 차량에 의해 발생하는 진동크기를 수치해석적으로 예측한 결과이다. 곡선부를 주행하는 틸팅차량에 의한 진동의 특징으로, 진동의 방향성분을 들 수 있다. 진동의 방향성분은 직선 구간에서는 수직성분이 월등히 우세하나, 곡선구간에서는 수평성분이 크게 증가한다. 틸팅차량의 경우, 일반열차에 비해 곡선 구간에서의 높은 속도로 인해 수평성분이 크게 발생한다 따라서 틸팅차량의 주행에 의한 인근 지역에서의 진동환경을 파악하기 위해서는 수직성분 뿐 아니라 수평성분의 정확한 파악도 필요하다. 이러한 진동의 방향성분은 근거리 또는 원거리 영역에 파라 달라져, 이의 파악을 위한 연구가 필요하다.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.54-59
• /
• 1996

시속 300km로 주행하는 고속철도 열차의 주행안정성 및 승차감을 확보하기 위해서는 열차하중을 고려한 정교한 정적, 동적해석 및 설계가 이루어져야 한다. 따라서 차량과 궤도의 동적상호작용 및 차량과 교량의 동적상호작용, 터널의 미기압 및 공기압, 대단면 터널굴착의 안정성평가, 열차주행에 의한 지반진동의 예측 등에 전산수치해석기법의 활용 및 개발이 현재 활발히 이루어지고 있다. 그러나 고속철도 보유국을 포함한 선진국들에 비하면은 이러한 전산수치해석분야에 있어서 아직도 더 많은 연구 및 개발이 본 공단을 포함하여 학계 및 연구소에서 이루어져야 하겠으며, 본 경부고속철도 건설사업으로 인하여 차량, 전기시설분야의 각종 첨단기술개발 및 발전과 더불어 하부 토목구조물의 건설 및 설계 해석분야에 많은 발전이 기대된다 하겠다.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.948-954
• /
• 2004

This study deals with the Evaluation of track system, when Newly developed Korea High Speed Train(KHST) by KRRI and KTX trains are running pass curved track of conventional line. In order to evaluate stability of track and vehicle running safety. the effect of curve radius, the field tests were performed at sharply curved track.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.345-353
• /
• 2020

On conventional railway lines, trains with different speeds are operated. Therefore, trains moving on curved sections with cants must accept various ranges of balanced cants, cant deficiency, and cant excess, which is essential for the comfort and safety of train operation. In this study, the correlation between the curve radius, cant, and train speed on a track was analyzed to check the cant range that satisfies the criteria of train types, operation speed, cant deficiency, and cant excess. Also, the range of setting the cant by the curve radius and balanced cant were calculated by a regression analysis of train speed according to the frequency of operation in the case of mixed trains. The results could make it possible to improve the speed of the operation route, reduce the loss of ride quality, reduce the risk of derailing caused by cant deficiency, and minimize the load deflection by excess cant. This will ensure the safety of trains running on curves and improve the efficiency of track maintenance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.81-87
• /
• 2017

This paper describes the dynamic behavior and enhancement of Korean high-speed trains. The tail vibration reduction method of the yaw damper installation method change, which was derived from previous research, was applied to the running test of high-speed train. In addition, the vibration reduction method for the entire vehicle was derived by a numerical method and its effect was confirmed by a running test. The improved design was applied to the double-deck high-speed train coaches and the commissioning proceeded without problems in dynamic behavior. Sensitivity analysis of the suspension parameters affecting the critical speed of Korean next-generation high-speed trains was performed and four design variables that greatly affected the critical speed were derived. These were in the order of the primary elastic joint x-directional stiffness, the secondary yaw damper series stiffness, the secondary lateral damper damping coefficient, and the carbody damper damping coefficient. By optimizing the design variables, the suspension parameter that improves the critical speed by 23.3% can be used in the commercial designs of Korean next-generation high-speed trains.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.165-170
• /
• 2014

The resistance to motion of the Korean next-generation high-speed train (HEUM-430X) was assessed on the basis of 12 coasting test runs at coasting speeds up to approximately 380km/h. Two different methods, a linear regression method and a time-integral method, were employed to calculate decelerations from the time-velocity data and the time-distance data, respectively, and an equation of resistance to motion was devised from the deceleration data calculated at each time section. The effect of an improvement of the aerodynamic shape on the resistance to motion was investigated, with the results showing that the running resistance was reduced by about 15% due to these improvements. An increase of approximately 28% of the running resistance was also noted when running in a tunnel relative to running through an open field.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.06a
• /
• pp.15-54
• /
• 1993

Ground Vibrations were measured at one location near the railroad track at a site about 3.2 kilometers north of Chapel Hill, Tennessee, U.S.A., Measurements were made during the passage of 18 freight trains over the six-day period. The objective of this study was to evaluate ground vibration levels from train and other traffic at possible construction depths for the Superconducting Super Collider(SSC), The criterion with which the vibration levels are compared is the more stringent one : that is, 0, 0005 inchs(about 0.0127 m) at 3H2, The measurements show conclusively that vibration levels generated by railroad traffic in the rock at the depth of 100 it (30m) or more are at least 10 times smaller than the criterion.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.220-222
• /
• 2004

경량전철 시스템은 통합시스템으로 시험의 종류 및 방법이 다양하여 기존의 열차 계측 시스템은 계측기마다 별도로 시험하고. 각각의 계측기마다의 계측데이터를 취합하여 각 계측 데이터별로 비교 분석하여야 함으로 열차의 주행을 시험항목에 따라 열차를 여러번 운행, 동작등, 반복을 피하기 위하여 시스템을 통합하여 체계적으로 시험하기 위한 방안으로 계측시스템의 구축이 필요함에 따라 채널의 추가 및 삭제가 용이한 분산계측 시스템으로 무선 랜을 이용하여 거리 및 위치의 한계를 극복하고 주행 중인 열차의 차상 및 지상의 Data를 통합하여 측정하며 측정채널의 시간동기를 맞추어 측정함으로 Data 분석 시 채널간의 비교가 용이하도륵 시스템의 설계를 하였다.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2519-2523
• /
• 2008

When constructing a high-speed railroad, the reduction of the distance between track centers and the width of track bed will save the construction cost. However the shortening the distance between track centers may cause the stability problems due to higher wind pressure. Therefore the extensive technical review and aerodynamical study should be performed to determine the adequate distance between track centers. In this study, the impact that the increase in wind pressure due to the change of aerodynamic phenomena with the change of the distance between track centers may have on two trains passing by each other was predicted, and the stability of train operation was analyzed in order to review the distance between track centers suitable to Honam HSR trains. We conducted the parametric study of the effects of train wind on the running stability.

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.545-554
• /
• 2011

In order to get dynamic serviceability of a train travelling on a railway bridge, comfort limits with the deflection of bridge and vertical acceleration on car body are proposed in Eurocode, Shinkansen design criteria, The design guideline of the Honam High-speed railway. The design guideline of the Honam High-speed railway has quoted Eurocode. Therefore it is expected that supplementation of comfort limit of railway bridge according to expansion of span length and the improvement traveling speed of trains in the future would relatively fall behind developed countries in railway. Therefore, in order to secure technological competitiveness in world market, the study was conducted to propose the deflection limit based on vibration serviceability of railway bridges that can consider bridge-train interaction and travelling speed increase. The parameter study and bridge-train dynamic interaction analysis was conducted to figure out the correlation of vertical acceleration on car body and bridge displacement according to the increase in travelling speed. Also, the trend of increasing vertical acceleration on car body according to the increase in travelling speed was confirmed, and the amplification coefficient of vertical acceleration on car body was suggested. And the deflection form and vibration of the bridge were assumed to be in harmonic motion, and transfer function and the amplification coefficient were used to develop the dynamic serviceability deflection limit of the high-speed railway bridge as a formula.