• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1165-1172
• /
• 2008

In this paper, the scattering parameters of the metamaterial slab are obtained using the 2D FDTD(Finite-Difference Time-Domain) method. FDTD method is one of strongest electromagnetic numerical method which is widely used to analyze the metamaterial structure because of its simplicity. But it is very difficult to obtain frequency response of metamaterial itself because frequency dispersive model such as Lorentz, Drude model are used in FDTD. We used the well-known m-n-m cycle sine pulse to obtain the frequency response of the metamaterials. Comparisons between the wideband Gaussian input pulse and band-limited m-n-m cycle sine pulse are performed in this paper also. From the results, we concluded that the scattering parameters in frequency domain can be obtained using specific input pulse in FDTD even if the response has valid only for limited bandwidth.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.2
• /
• pp.61-68
• /
• 2007

The frequency response of a microphone, which indicates the frequency range that a microphone can output within the approved level, is one of the most significant standards used to measure the characteristics of a microphone. At present, conventional methods of measuring the frequency response are complicated and involve the use of expensive equipment. To complement the disadvantages, this paper suggests a new algorithm that can measure the frequency response of a microphone in a simple manner. The algorithm suggested in this paper generates the Optimized Aoshima's Time Stretched Pulse(OATSP) signal from a computer via a standard speaker and measures the impulse response of a microphone by convolution the inverse OATSP signal and the received by the microphone to be measured. Then, the frequency response of the microphone to be measured is calculated using the signals. The performance test for the algorithm suggested in the study was conducted through a comparative analysis of the frequency response data and the measures of frequency response of the microphone measured by the algorithm. It proved that the algorithm is suitable for measuring the frequency response of a microphone, and that despite a few errors they are all within the error tolerance.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.130-137
• /
• 2021

The characteristics of forced vibration by an external excitation force having a frequency were analyzed according to the amplitude and frequency of the excitation force. To obtain displacement, velocity, and acceleration, numerical analysis was performed to obtain the frequency response, and in particular, each FRF(Frequency Response Function) was analyzed to reveal the location of the system natural frequency and excitation frequency in the frequency domain. In the vibration model caused by external excitation, the natural frequency and distribution of the surrounding excitation mode in displacement, velocity and acceleration FRF. The FRF was also shown in the power spectrum and FRF of real and imaginary parts. The external excitation force was approximated with the excitation force of a sine wave by giving the amplitude and frequency, the mode generated by this excitation force could be distinguished. After numerical analysis by changing the equivalent mass, damping and stiffness, the forced vibration response characteristics by external excitation force were systematically analyzed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.206-210
• /
• 2000

본 논문에서는 PLL 주파수 합성기를 이용한 900 MHz 대역의 무선 마이크용 송신기를 설계 및 제작하였다. 위상잡음을 고려한 주파수 합성기는 VCO, Loop Filter 및 RF 중폭부로 구성한 후 HP EEsof ADS ver. 1.3을 이용하여 설계하였다. VCO는 구조가 간단하며 변조가 용이한 직접변조방식을 사용하였으며 Loop Filter는 주파수 합성기의 기준 고조파 성분을 낮추기 위해 수동 3차 필터를 사용하였다. 주파수 대역 928.125 MHz～929.875 MHz 내에서 채널간격 125 kHz를 갖으며 15개의 채널이 되도록 분주비를 설정한 주파수 합성기는 제작 결과, 송신기 출력 9.3 dBm과 위상잡음이 100 kHz에서 -113 dBc/Hz 이하의 위상잡음 특성을 나타내었고 불요주파수 특성은 -80 dBc 이하의 특성을 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.76-77
• /
• 2006

유기발광소자의 주파수 응답 특성은 계면에서의 특성을 파악하는데 유요한 도구이다. 온 연구는 유기발광소자의 재료로 널리 알려진 $Alq_3$를 이용하여 소자를 제작한 후, 주파수 응답 특성을 이용하여 $Alq_3$의 등가회로를 해석하였다. 또 온도에 따른 용량성분을 분석하여 $Alq_3$에 인가된 전압에 따라 용량성분의 변화를 살펴보았다. 용량성분의 변화는 낮은 주파수 영역에서는 나타나지 않다가, 높은 주파수 영역에서 온도에 따라 미묘하게 감소하는 것을 볼 수 있다. 이는 낮은 주파수 영역에서 높은 주파수 영역으로 변화하면서 소자 내의 주된 성분이 저항성분에서 용량성분으로 변화하는 것을 의미하며 높은 주파수에서 온도에 따른 용량성분의 변화를 찾을 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.1-10
• /
• 1993

Frequency response functions(FRF) are the most fundamental data for the frequency domain identifications of structural systems. In this paper, an improved method for estimating FRF's is presented. The new FRF estimator takes the weighted average of two conventional estimators, $H_1$(f) and $H_2$(f), utilizing the fact that $H_2$(f) gives more accurate estimate at resonance, while $H_1$(f) yields better results at antiresonances. Based on the estimated FRF's, the modal parameters of the structures, such as, natural frequencies, damping ratios and mode shapes, are also estimated. The effectiveness of the proposed method is investigated through numerical and experimental studies. The estimated results indicate that the proposed estimator gives more accurate results than other estimators.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.173-177
• /
• 2003

본 논문에서는 RPWM(Random PWM) 방식을 사용한 3상 유도전동기 구동 시스템의 스위칭 주파수 가변에 따른 구동 특성을 비교 분석하고자 한다. 기존의 RPWM 방식과 본 논문에서 제안한 RPWM 기법을 이용하여 스위칭 주파수 가변에 따른 $M_f$ 변화에 대한 구동특성을 비교 분석하고, 특히 10000[rpm] 이상의 고속운전특성에서의 인버터 출력 전압 및 전류의 고조파 저감효과를 제안된 기법으로부터 확인할 수 있다. 이러한 과정에서는 제안된 RPWM 기법 알고리즘에 대한 타당성 검증을 위해 DSP를 이용한 IGBT 인버터로부터 개별 스위칭 주파수별 실험을 하고, 그 결과의 취득으로부터 스위칭 주파수별 운전 특성을 분석하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2075-2078
• /
• 2005

본 논문은 무수은 평판 형광램프의 구동원리를 해석하기 위하여 주파수 변화에 따른 벽전하와 벽전압 특성이 방전특성에 미치는 영향을 연구하였다. 펄스폭 $9[{\mu}s]$, 300[ns]의 전압 상승 시간을 갖는 펄스파로 방전시켰다. 벽전하, 정전용량, 벽전압의 전기적 특성은 인가된 전압, 전류 파형으로부터 계산하였다. 이때 구동 주파수는 20[kHz]에서 40[kHz]까지 변화시키면서 방전 전후의 정전용량 및 Q-V특성 곡선을 해석하였다. 주파수가 증가하면서 전극간의 정전용량 $C_p$ 방전공간상의 정전용량 $C_o$는 변화를 보이지 않았으나 방전공간과 전극사이의 정전용량 $2C_g$는 증가하는 경향을 보였다. 또한 주파수가 증가하면서 방전개시 전압은 감소하였으며 효율은 감소하는 경향을 보였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2011

In this study, we investigated the effect of the simplification for high frequency region in Head-Related Transfer Function(HRTF) on the sound localization. For this purpose, HRTF was measured and analyzed. The result in the HRTF frequency characteristic of the back sound source showed that the decrease revel of high frequency was smaller than that of low frequency region, which means the possibility of simplification in the high frequency region. Simplification was performed by flattening of the high frequency amplitude characteristics with the insertion of the low-pass filter, whose cutoff frequency is given by boundary frequency. Auditory experiments were performed to evaluate the simplified HRTF. The result showed that direction perception was not influenced by the simplification of the frequency characteristics of HRTF for the error of sound localization. The rate of confusion for the front and back was not affected by the simplification of the frequency characteristics over 8kHz of HRTF. Finally, we made it clear that the sound localization was not affected by the simplification of frequency characteristics of HRTF over 8kHz.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.87-89
• /
• 2006

U-물류/유통, U-항만에 핵심적인 기술이 될 Ultra-Wide(UWB)통신을 위한 광대역 안테나를 설계, 개발하였다. 설계된 안테나는 UWB 주파수 대역인 3.1$^{\sim}$11.7GHz 대역에서 안테나 특성을 만족하고, IEEE 802-11a와HIPERLAN/2에 의해 사용이 제한된 5.15${\sim}$5.825GHz 대역에서 주파수 저지 대역을 가지기 위하여 U모양의 얇은 슬롯을 복사 패치 위에 구현 하였다. 제작한 안테나는 5${\sim}$595GHz 대역을 제외하고는 안테나의 특성을 만족한다.