• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.156-166
• /
• 2000

In discrete multi-tone (DMT)-based very high bit-rate digital subscriber line (VDSL) systems, the ingressed RFI (Radio Frequency Interference) accompanied by transmitted signal at the receiver is known to cause the spectralleakage by the finite-point FFT, resulting in significant performance degradation.0 this paper, we propose a RFIcancellation technique which can compensate the ingressed RFI efficiently, especially for a high data-rate VDSLsystem. The proposed technique compensates the performance degradation of e VDSL system due to RFI byusing a time-domain RFI canceller whose coefficients are obtained from the estimated center frequency of RFI inthe frequency domain under the assumption that the ingressed RFI is a narrow-band signal compared to VDSLsampling frequency. The proposed technique requires no training symbol and convergence period, and worksproperly even when spectral shape of the ingressed RFI is unknown or arbitrary. Feasibility of the proposedtechnique is demonstrated via a computer simulation by comparing its performance with the performance of theprevious RFI cancellation technique.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.114-120
• /
• 2009

Rupture directivity is the important parameter in estimating damage due to earthquakes. However, the traditional moment tensor inversion technique cannot resolve the real fault plane or the rupture directivity. To overcome these limitations, we have developed a new inversion algorithm to determine the moment tensor solution and the rupture directivity for moderate earthquakes, using the waveform inversion technique in the frequency domain. Numerical experiments for unilateral and bilateral rupture models with various rupture velocities confirm that the method can resolve the ambiguity of the fault planes and the rupture directivity successfully. To verify the feasibility of the technique, we tested the sensitivity to velocity models, which must be the most critical factor in practice. The results of the sensitivity tests show that the method can be applied even though the velocity model is not perfect. If this method is applied in regions where the velocity model is well verified, we can estimate the rupture directivity of a moderate earthquake. This method makes a significant contribution to understanding the characteristics of earthquakes in those regions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.7
• /
• pp.945-951
• /
• 2007

Noise cancellation is essential for the devices which use speech as an interface. In real environments, speech quality and recognition rates are degraded by the auditive noises coming near the microphone. In this paper, we propose a noise cancellation algorithm using stereo microphones basically. The advantage of the use of multiple microphones is that the direction information of the target source could be applied. The proposed noise canceller is based on the Wiener filter. To estimate the filter, noise and target speech frequency responses should be known and they are estimated by the spectral classification in the frequency domain. The performance of the proposed algorithm is compared with that of the well-known Frost algorithm and the generalized sidelobe canceller (GSC) with an adaptation mode controller (AMC). As performance measures, the perceptual evaluation of speech quality (PESQ), which is the most widely used among various objective speech quality methods, and speech recognition rates are adopted.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.5
• /
• pp.47-57
• /
• 2006

The shear wave velocity is related with the stiffness of granular skeleton and mass density. The shear stiffness of the granular skeleton remains unaffected by the presence of the fluid. Bender elements are convenient shear wave transducers for instrumenting soil cells due to optimal soil-transducer coupling. This study addresses the principles of the shear wave, the design and implementation of bender elements including electromagnetic coupling prevention, directivity, resonant frequency, detection of first arrival, and near field effects. It is shown that electromagnetic coupling effects can be minimized using parallel-type bender elements. Thus, the in-plane S-wave directivity is quasi-circular. The resonant frequency of bender element installations depends on the geometry of the bender element, the anchor efficiency and the soil stiffness. One of the most cumbersome parts in the bender element test is near field effects, which affect the selection of arrival time. The selection of the first arrival within the near field Is effectively solved by the multiple reflection technique and signal matching technique. Bender elements, which requires several considerations, may be effective tools for the subsurface characterization by using S-wave.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.106-111
• /
• 2011

This paper presents an ASIP (Application-specific Instruction Processor) for motion estimation that employs specific IME instructions and its programmable and reconfigurable hardware architecture for various video codecs, such as H.264/AVC, MPEG4, etc. With the proposed specific instructions and hardware accelerator, it can handle the real-time processing requirement of High Definition (HD) video. With the parallel operations and SAD unit control using pattern information, the proposed IME instruction supports not only full search algorithm but also other fast search algorithms. The hardware size is 77K gates for each Processing Element Group (PEG) which has 256 SAD PEs. The proposed ASIP runs at 160MHz with sixteen PEGs and it can handle 1080p@30 frame in real time.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.97-103
• /
• 2019

In this paper, we designed and fabricated a receiving modem that can be applied to guided weapons can change real-time targets with little effect of fading. The designed modem consists of synchronous detector, timing error estimator, timing recovery, differential decoder and viterbi decoder, and it's implemented in FPGA so that it can be redesigned and modified according to requirements. The modem board was directly converted from IF frequency to baseband and converted into digital data through ADC. It is confirmed that it is applicable to the guided weapons that changing real-time targets through simulations, measurements and test.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.101-106
• /
• 2020

In order to smoothly control the speed of the induction motor, it is necessary to obtain the required rotor speed information. In order to obtain the speed information, it must be obtained using a sensor, but it can also be obtained using an appropriate algorithm without using a sensor. In order to obtain speed information, a system was designed using a model reference adaptive system (MARS). Indirect vector control, one of the speed control methods of induction motors, was calculated from the motor current and rotor parameter values. The method of obtaining the position information of the magnetic flux by combining the slip frequency with the rotor speed was used. It is possible to simply perform instantaneous current control in a wide speed range without actual magnetic flux information, and has the advantage that the structure of the controller is simple. Therefore, in this paper, the control system was constructed based on the indirect vector control method, and the speed control system of the induction motor was developed by estimating the required rotor speed information as an intelligent algorithm developed without using it as a sensor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.465-473
• /
• 2005

In this paper, the reduction scheme of Interchannel Interference(ICI) caused by the phase noise in Orthogonal Frequency Division Multiplexing(OFDM) systems for archiving high data rates is proposed. The performance of conventional common phase error(CPE) compensation method is degraded by the phase noise with wide 3dB bandwidth in OFDM systems width a higher-order constellation. After estimating dominant ICI coefficients using pilot subcarriers and data subcarriers adjacent to pilot subcarriers, the proposed scheme compensates OFDM signals distorted by the phase noise using estimated coefficients in the time or frequency domain. Also, in order to determine the length of dominant ICI coefficients effectively, the estimation method of the 3dB bandwidth of the phase noise is proposed. The proposed phase noise reduction method is shown to improve the Bit Error Ratio(BER) performance compared with the conventional CPE compensation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.995-999
• /
• 2015

Inductive sensors are versatile and economical devices that are widely used to measure a wide variety of physical variables, such as displacement, force, and pressure. In this paper, we propose a simple inductive sensor consisting of a thin partial ring and a coil set. The self-inductance of the sensor was estimated using magnetic circuit analysis and validated through finite element analysis (FEA). The natural frequency of the ring was estimated using Castigliano's theorem and the method of equivalent mass. The estimation was validated through experiments and FEA. A prototype sensor with a signal processing circuit is built and applied to noninvasively sense the pressure inside a flexible tube. The obtained sensor outputs show quadratic behavior with respect to the pressure. When fitted to a quadratic equation, the least-square measurement error was less than 2%. The results confirm the feasibility of pressure sensing using the proposed inductive sensor.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.2
• /
• pp.87-92
• /
• 2012

Voltage and current phasor estimation has been executed by GPS-based synchronized PMU, which has become an important way of wide-area blackout protection for the prevention of expending faults in a power system. The PMU technique can not easily get the field data and it is impossible to share information, so that there has been used a FNET(Frequency Monitoring Network) method for the wide-area intelligent protection in USA. It consists of FDR(Fault Disturbance Recorder) and IMS(Information Management System). Therefore, FDR must provide an optimal frequency estimation method that is robust to noise and failure. In this paper, we present comparative studies for the frequency estimation method using IRDWT(Improved Recursive Discrete Wavelet Transform), FRDWT(Fast Recursive Discrete Wavelet Transform), and DFT(Discrete Fourier Transform). The Republic of Korea345[kV] power system modeling data by EMTP-RV are used to evaluate the performance of the proposed two kinds of RDWT(Recursive Discrete Wavelet Transform) and DFT. The simulation results show that the proposed frequency estimation technique using FRDWT could be the optimal frequency measurement method, and thus be applied to FDR.