• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.231-232
• /
• 2015

본 논문에서는 반도체 변압기(Solid State Transformer; SST)를 구성하는 단상 계통 연계형 인버터의 소신호 모델링과 이를 통한 효과적인 제어기 설계 방법을 제안한다. 평균화, 선형화 및 주파수 영역으로의 변환 단계를 거쳐 소신호 모델링을 수행하여 인버터 시스템의 전달함수를 얻을 수 있다. 이를 이용해 다양한 변동에 대한 인버터의 안정도와 동작 특성을 파악하고, 전압 제어기 및 전류 제어기를 설계하여 동작 영역에서 인버터의 안정적인 동작과 적절한 동특성이 확보되도록 한다. 본 논문에서 제안된 모델링과 제어 방법은 시뮬레이션을 통해 유효성을 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.208-217
• /
• 1998

본 연구에서는 ER 브레이크와 ER클러치를 피드백작동기로 사용하여 이송테이블의 위치 추적제어를 수행하였다. 이를 위해 먼저 아라빅 검(arabic gum)계통의 ER유체를 자체조성한 후 전기장에 대한 빙햄(Bingham)모델을 실험적으로 도출하였다. 빙햄모델에 근거하여 평판형의 ER브레이크와 실린더형의 ER클러치를 설계 제작하였으며, 계단입력(step input)전기장에 따른 출력토오크특성을 통하여 이들 작동기의 동적모델을 얻었다. 이들 작동기와 연계된 이송테이블시스템의 운동지배방정식을 유도한 후 위치추적제어를 위한 슬라이딩모드제어기를 설계하였다. 제어기 설계시 이송해이블의 부하질량 변화에 대한 시스템 불확실성과 마찰력을 고려하여 제어성능의 강건성을 보장하도록 하였다. 제안된 제어시스템의 제어영역(control bandwidth)을 주파수 영역에서 고찰한 후 여러 레적에 대한 위치추적제어 실험을 수행하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.77-84
• /
• 1998

The continuous time signal system by development of CMOS technology have been receiving consideration attention. In this paper, Low pass filter using CMOS floating resistor have been designed with cut off frequency for speech signal processing. Especially a new floating resistor consisting entirely of CMOS devices in saturation has been developed. Linearity within $\pm$0.04% is achieved through nonlineartiy via current mirrors over an applied range of $\pm$1V. The frequency response exceeds 10MHz, and the resistors are expected to be useful in implementing integrated circuit active RC filters. The low pass filter designed using this method has simpler structure than switched capacitor filter. So reduce the chip area. The characteristics of the designed low pass filter using this method are simulated by pspice program.

• Journal of the Korea Society for Simulation
• /
• v.25 no.3
• /
• pp.15-28
• /
• 2016

It is necessary to analyze underwater acoustics channel(UAC) modeling and simulation for underwater weapon system development and acquisition. In order to analyze UAC, there are underwater acoustics propagation numerical analysis models(Ray theory, Parabolic equation, Normal-mode, Wavenumber integration). However, If these models are used for multiple frequency signal analysis, they are inaccurate to calculate result of analysis effectiveness and restricted for signal processing and analysis. In this paper, to overcome this problem, we propose simple/multiple frequency signal analysis model of the Pseudospectral Time-Domain Method synthetic environment UAC applied to underwater environment noise model as like as realistic underwater environment. In order to confirm the validation of the model, we performed the 9 scenarios simulation(4 scenarios of single frequency signal, 4 scenarios of multiple frequency signal, 1 scenario of single/multiple frequency signal like submarine radiated noise) for validation and confirmed the validation of this model through the simulation model.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.37-40
• /
• 2006

FM(Frequency Modulation) 음 합성방식은 오랫동안 연구되어 왔고 여러 가지 효과를 주기에 유용하고 비교적 낮은 사양으로 높은 수준의 배음을 합성할 수 있지만 그 응용분야가 대부분이 서양악기 위주의 연구였다. 이에 본 논문에서는 국악 관악기인 피리를 주파수 영역에서 저주파 영역과 고주파 영역으로 나누어 분석하고 이 결과를 이용하여 FM 파라미터를 추출하고 비대칭 FM합성방식으로 1차적인 소리를 합성하였다. 분석된 저주파 영역과 고주파 영역의 특성을 각각의 역 필터링을 위한 2개의 필터를 설계하여 이를 다시 합성된 소리를 통과시켜 두 소리를 합산함으로써 더욱 원음과 유사한 소리를 합성할 수 있었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.142-143
• /
• 2003

제조기술이 발전함에 따라 회절 복합 렌즈(diffractive hybrid lens)를 사용한 광학계 설계에 대한 많은 연구가 보고 되고 있다. 본 연구에서는 회절 복합 렌즈를 사용한 F／l.0인 광학계를 설계하여 비열화 특성을 분석하였다. 성능조건으로는 MTF가 50% 일 때 사용된 영상센서의 Nyquist 주파수인 11.11cys／mm로 하였다. 사용된 검출기 사양은 픽셀 크기 45um, 픽셀 수 320$\times$240 이며, fill factor 는 무시하였다. 광학계의 유효초점거리는 171.73mm 이다. (중략)

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.34-47
• /
• 2006

In this paper, a new testing technique for core components of wireless transceiver was proposed. That was, band fault models (including the information of specifications in the analogue and RF IC) and methods which can test specifications in the time domain easily by observing a variation of band fault models in the circuit output were proposed and developed. This technique had an advantage over testing technique in frequency domain because it didn't need expensive test equipments and could reduce the time required. Test technique proposed in this paper was adapted to the test of 5.25 GHz low noise amplifier and proved that this testing technique was efficient in RF IC including low noise amplifier.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.565-572
• /
• 2001

At the most recent years, laser medical instruments, laser applications and laser nuclear fusion need strong visible light and ultraviolet rays. Nonlinear optical devices, such as harmonic generators and parametric oscillators, provide a means of extending the frequency range of available laser sources. Frequency conversion is a useful technique for extending the utility of high-power lasers. It utilizes the nonlinear optical response of an optical medium in intense radiation fields to generate new frequencies. These progresses have been used to generate high-power radiation in all spectral regions, from the ultraviolet to the far infrared. Optical parametric oscillators and amplifiers generate two waves of lower frequency They are capable of generating a range of wavelengths from a single frequency source, in some cases spanning the entire visible and near infrared regions. Consequently, in order to obtain the green light, the pulsed Nd:YAG laser using multiple-mesh PFN(Pulsed Forming Network) method with Nonlinear optical device was adopted. We compared the current pulseshapes with the laser output energy, and conversion efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.787-793
• /
• 2018

In this paper, we propose a new single carrier - frequency domain equalization (SC-FDE) structure to cope with narrow band interference. In the conventional SC-FDE structure, when a high-power narrow band interference exists, channel estimation and data recovery is difficult. To relieve from this problem, this paper proposes a new SC-FDE frame structure to enable frequency-domain channel estimation in the environments that exist narrow band interference. Specifically, in the conventional method, the channel estimation is performed in time-domain first and from that, the frequency-domain channel is obtained by Fourier transform. In contrast, we proposed a new SC-FDE structure to enable frequency-domain channel estimation directly from received signals without time-domain channel estimation. The receiver performance improvement is verified through computer simulation. According to the results, the proposed technique can detect the signal with less than 2 dB loss compared with jammer-free environments, while the conventional method does not communicate with each other.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.165-170
• /
• 2005

In this paper, influences of a ultra wideband (UWB) antenna on impulse channel measurement are investigated in time domain (TD) and frequency domain (FD) as well. Firstly, impulse response of an UWB antenna is obtained and then using the result of impulse response of the UWB antenna, influences of the antenna on impulse radio channel is analyzed. Furthermore, using the impulse response of the UWB anenna, method of impulse radio channel analysis is presented by excluding the effect of the antenna from an impulse radio channel. For verifying the theory, a modified conical monopole antenna is designed for measuring impulse radio channel and its impulse response is obtained. After that, in order to investigate the effects of the UWB antenna on an impulse radio channel, multipath environments are set up in an anechonic chamber and transmission coefficient for each multipath environment is measured with an aid of vector network analyzer. Data measured in frequency domain is transformed into those in time domain by way of signal processing. Measurement shows that such properties of the antenna as dispersion and ringing affect impulse radio channel. Moreover, using the impulse response of the antenna, impulse response of only multipath channel is obtained.