• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.172-173
• /
• 2011

전력시스템 주파수는 주파수 계전기용도 이외에 전력시스템에 대용량 집중전원 및 소규모 분산전원이 연계될 때 동기 검정 계전기와 발전기 및 소내 변압기의 과여자 상태를 감지하는 V/F 계전기에서도 사용된다. 주파수 계측장치는 주파수 및 주파수 편이를 실시간으로 정확하고 신속하게 측정함으로서 정규 주파수를 유지시키고 더 나아가 사고파급방지에 대한 책무를 수행해야 한다. DFT필터는 광범위하게 사용되었으나 주파수가 편이하게 되면 오차가 발생된다. 근래 웨이브릿 변환이 새로운 주목을 받고 것은 지속적인 연구 결과, 단일 반복 방정식 형태로 연산 부담이 적어 실시간 신호 처리에 적당한 고속 반복 이산 웨이브릿 변환이 제시되었기 때문으로 생각된다. 본 논문에서는 FRDWT에 의한 주파수 추정 기법을 제시하고자 한다. 제시된 기법의 성능 평가는 발전기 내부사고와 외부사고 데이터에 의해 이루어졌다.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.115-120
• /
• 2002

This paper presents the implementation of IS-95 CDMA signal processor, baseband and Intermediate Frequency(IF) digital converter using Field Programmable Gate Array(FPGA) and ADC/DAC and frequency up/down converter IS-95 CDMA channel processor is generated the pilot channel signal with short PN code and Walsh-code generator. The digital If is composed of FPGA. digital transmit/receive signal processor and high speed analog-to-digital converter(ADC) and digital-to-analog converter(DAC). The frequency up/down converter consisted of filter, mixer, digital attenuator and PLL is analog conversion between intermediate frequency(IF) and baseband. This implemented system can be deployed in the IS-95 CDMA base station device etc.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.342-349
• /
• 2008

Multipath makes clear message transfer difficult in the underwater communication. To solve this problem, we propose a new method producing proper MFSP (Modulation Frequency Shift Period) which could be obtained by calculating time delay caused by different path from a transmitter to a receiver. At the transmitter end, messages were divided according to the size of the MFSP and transmitted accordingly alternating Frequency. At the receiver end, the received messages were demodulated in order to recover the original message by the adaptive BISMO algorithm which is constructed at the algorithm design stage. Adaptive MFSP and estimated BER (Bit Error Rate) were calculated through simulation test.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.510-513
• /
• 2001

본 논문에서는 인간의 시각적 특성을 고려한 새로운 변환 영역 워터마킹 기법을 제안한다. 제안된 기법에서는 워터마크로 사용될 랜덤 신호를 변환 블록의 중간 주파수 영역 변환계수로 설정한 후 이를 역변환한다. 그리고 역변환된 워터마크 영상에서 시각적으로 인지하치 쉬운 영역에 위치한 워터마크 신호를 삭제한 후 다시 순방향 변환하여 중간 주파수 영역의 훼손된 워터마크를 초기의 워터마크로 복원한다. 이러한 과정을 반복적으로 실행한 후 최종적으로 생성된 변환 영역 워터마크를 입력 영상의 변환 계수에 대해 삽입한다. 따라서 워터마킹된 영상에서 워터마크의 삽입으로 인한 시각적 왜곡은 감소될 수 있다. 모의 실험은 제안된 방법으로 형성된 워터마킹된 영상이 시각적으로 우수하며 손실 부호화, 필터링 등의 다양한 영상처리에 대해 견고함을 나타낸다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.4
• /
• pp.270-276
• /
• 1999

Fourier transform has been one of the most commonly used tools in study of frequency characteristics of signal. However, based on the Fourier transform. it is hard to tell whether a signal's frequency contents evolve in time or not. Recently, to overcome Fourier transform fault. not to represent non-stationary signal, time-frequency analysis methods are developed and those can represent informations of signal's time and frequency at the same time. In this study we analysed ultrasonic signal for degraded SUS 316 with time-frequency analysis method. In particular the methods such as short time Fourier(STFT) and Wigner-Ville distribution(WVD) were used to extract frequency contents and characteristics from ultrasonic signals.

• Geophysics and Geophysical Exploration
• /
• v.17 no.3
• /
• pp.129-136
• /
• 2014

Electromagnetic (EM) methods are generally divided into frequency-domain EM (FDEM) and time-domain EM (TDEM) methods, depending on the source waveform. The FDEM and TDEM fields are mathematically related by the Fourier transformation, and the TDEM field can thus be obtained as the Fourier transformation of FDEM data. For modeling in time-domain, we can use fast frequency-domain modeling codes and then convert the results to the time domain with a suitable numerical method. Thus, frequency-to-time transformations are of interest to EM methods, which is generally attained through fast Fourier transform. However, faster frequency-to-time transformation is required for the 3D inversion of TDEM data or for the processing of vast air-borne TDEM data. The diffusion expansion method (DEM) is one of smart frequency-to-time transformation methods. In DEM, the EM field is expanded into a sequence of diffusion functions with a known frequency dependence, but with unknown diffusion-times that must be chosen based on the data to be transformed. Especially, accuracy of DEM is sensitive to the diffusion-time. In this study, we developed a method to determine the optimum range of diffusion-time values, minimizing the RMS error of the frequency-domain data approximated by the diffusion expansion. We confirmed that this method produces accurate results over a wider time range for a homogeneous half-space and two-layered model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.621-629
• /
• 2008

This paper presents a low temperature co-fire ceramics(LTCC) Upconverter for a Ka-band OBS satellite transponder in order for size reduction which is one of the most important requirement for satellite components. A S-band low-pass filter(LPF), a K-band band-pass filter(BPF), and an upconverting MMIC mixer are embedded in the multi-layer structure of the upconverter. All spurious can be selectively rejected by employing a modified Elliptic low pass filter with a multi-pole structure for the S-band LPF. Also an improved performance of out-of-band rejection can be obtained. At the K-band BPF design a layer coupled configuration is employed. The upconverting mixer is an MMIC diode mixer with a double-balanced configuration. Conversion loss and isolation of the upconverter are 9 dB and 51 dBc, respectively. The size of the LTCC upconverter is only $8{\times}7{\times}0.6mm^3$ which is one-third for the thin-film based upconverter.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.37-40
• /
• 2021

비디오 압축 시 변환(transform)은 예측을 통해 만들어진 공간 영역에서의 잔차신호를 주파수 영역으로 변환함으로써 낮은 주파수 대역으로 에너지를 이동시켜 비디오 압축에서 중요한 역할을 수행한다. VVC(Versatile Video Coding)에서는 DCT-II(Discrete Cosine Transform-II), DST-VII(Discrete Sine Transform-VII), DCTVIII(Discrete Cosine Transform-VIII)를 이용하여 잔차신호 변환을 수행한다. 본 논문에서는 DCT-II, DST-VII, DCT-VIII 가 모두 선형 변환(linear transform)이라는 점에서 착안하여 변환의 선형성을 이용하여 계산량을 감소시키는 역변환을 제안한다. 실험결과 변환 수행 시 약 12.7%의 시간이 감소되는 것을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.189-193
• /
• 2005

In this paper, we propose a direct conversion double-balanced down-converter fer MB-OFDM W system, which is implemented using $0.18\;{\mu}m$ CMOS technology and its measurement results are shown. The proposed down-converter adopts a resistive current-source instead of general transconductance stage using MOS transistor to achieve wideband characteristics over RF input frequency band $3\~5\;GHz$ with good gain flatness. The measured conversion gain is more than +3 dB, and gain flatness is less than 3 dB for three UWB channels. The dc consumption of this work is only 0.89 mA from 1.8 V power supply, leading to the low-power W application.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.3
• /
• pp.156-163
• /
• 2003

Most watermarking techniques insert watermarks into transform coefficients in the frequency domain because we can consider robust or imperceptible frequency bands against malicious attacks to remove them. However, parameterization of 3-D data is not easy because of irregular attribution of connectivity information, while 1-I) or 2-D data is regular. In this paper we propose a new watermarking scheme for 3-D polygonal mesh models in the DCT domain. After we generate triangle strips by traversing the 3-D model and transform its vertex coordinates into the DCT domain, watermark signals are inserted into mid-frequency bands of AC coefficients for robustness and imperceptibility. We demonstrate that our scheme is robust against additive random noise, the affine transformation, and geometry compression by the MPEG-4 SNHC standard.