• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.153-163
• /
• 2010

In this paper a frequency response analysis using Krylov subspace-based model reduction and its design sensitivity analysis with respect to design variables are presented. Since the frequency response and its design sensitivity information are necessary for a gradient-based optimization, problems of high computational cost and resource may occur in the case that frequency response of a large sized finite element model is involved in the optimization iterations. In the suggested method model order reduction of finite element models are used to calculate both frequency response and frequency response sensitivity, therefore one can maximize the speed of numerical computation for the frequency response and its design sensitivity. As numerical examples, a semi-monocoque shell and an array-type $4{\times}4$ MEMS resonator are adopted to show the accuracy and efficiency of the suggested approach in calculating the FRF and its design sensitivity. The frequency response sensitivity through the model reduction shows a great time reduction in numerical computation and a good agreement with that from the initial full finite element model.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.85-95
• /
• 2009

In the binaural synthesis environments, wide varieties of the head-related transfer functions (HRTFs) that have measured with a various direction would be desirable to obtain the accurate and various spatial sound images. To reduce the size' of HRTFs, interpolation has been often employed, where the HRTF for any direction is obtained by a limited number of the representative HRTFs. In this paper, we study on the distortion measures for interpolation, which has an important role in interpolation. With lhe various objective distortion metrics, the differences between the interpolated and the measured HRTFs were computed. These were then compared and analyzed with the results from the listening tests. From the results, the objective distortion measures were selected, that reflected the perceptual differences in spatial sound image. This measure was employed in a practical interpolation technique. We applied the proposed method to four kinds of an HRTF set, measured from three human heads and one mannequin. As a result, the Mel-frequency cepstral distortion was shown to be a good predictor for the differences in spatial sound location, when three HRTF measured from human, and the time-domain signal to distortion ratio revealed good prediction results for the entire four HRTF sets.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.176-182
• /
• 2004

This paper proposes a frequency transfer function synthesis for simplifying a high-order model with time delay to a low-order model. The model reduction is based on minimizing the m function weighted by the numerator polynomial of reduced systems. The proposed methods provide a better fitness within low frequency. Four examples are given to illustrate the feasibilities of the suggested schemes.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.2
• /
• pp.133-142
• /
• 1993

In a computer-controlling wave generating system. it is sometimes necessary to incorporate the discrete transfer operation of wave board into control circuit in order to control the system in a more delicate way. A numerical filter simulating the transfer operation of wave board in time domain is designed in the form of a discrete recursive filter. The filter was applied to some example board inputs f3r either regular or irregular wave conditions in order to evaluate the filter performance. The filter outputs were compared with the results of theoretical analysis or the discrete convolution method. showing their excellent agreements. The discrete realization of the filter presented hen is in fact of the bilinear transformation. It was shown that the transformation always avoids the aliasing errors, being surely applicable with a sufficient accuracy even for the band-unlimited transfer function of wave board.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.133-141
• /
• 2010

Grounding system insures a reference potential point for electric devices and also provides a low impedance path for fault currents in the earth. The ground impedance as function of frequency is necessary for determining its performance since fault currents could contain a wide range of frequencies. Copper and concrete rod electrodes are the most commonly used grounding electrode in electric distribution systems. In this paper, the ground impedance of copper and concrete rods has been measured by frequency and time domain characteristic tests. An equivalent transfer function model of the ground impedance is identified from the measured values by using ARMA method and evaluated by comparing conventional grounding impedances.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.713-716
• /
• 2010

본 논문에서는 코리올리 효과를 가진 압전-구조 시스템의 주파수응답 해석을 효율적으로 수행하기 위한 크리로프 부공간 모델차수축소법을 제안하였다. 이 방법은 초기 유한요소모델과 축소모델의 전달함수의 계수인 모멘트를 일치시키는 방법을 이용하는 축소기법으로 이미 대형 유한요소모델의 주파수응답 해석에 효과적으로 이용되고 있다. 예제로 고려된 압전형 미소 각속도계의 해석에는 압전구동 하중과 구조체의 회전에 따른 원심력이 동시에 입력하중으로 고려되는 다중입력의 경우이므로 변환행렬 V의 생성시, block Arnoldi 과정을 이용하여 두 하중의 효과를 축소모델에 함께 고려한다. 본 문제에 제안된 축소기법을 이용한 결과, 축소모델을 이용하여 원래 시스템의 관심영역의 주파수응답을 작은 차수의 모델로도 정확하게 계산할 수 있음을 확인하였다. 본 논문에서 제안된 방법을 이용하면 다양한 가진조건과 각속도 입력 하에서의 주파수응답을 정확하고 더욱 효율적으로 계산할 수 있을 것이다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.46-52
• /
• 2018

A simple Crocco's $n-{\tau}$ time delay model and linear analysis of fluid flow coupled with acoustics are combined to investigate the high frequency combustion instability in the combustion chamber of LOX/hydrocarbon engines. The partial differential equation of the velocity potential is separated into ordinary differential equations, and eigenvalues that correspond to tangential resonance modes in the cylindrical chamber are determined. A general solution is obtained by solving the differential equation in the axial direction, and boundary conditions at the injector face and nozzle entrance are applied in order to calculate the chamber admittance. Frequency analysis of the transfer function is used to evaluate the stability of system. Stability margin is determined from the system gain and phase angle for the desired frequency range of 1T mode. The chamber model with variable baffle length and configurations are also considered in order to enhance the 1T mode stability of the combustion chamber.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.273-280
• /
• 2005

Robust magneto-telluric (MT) response function estimators are now in standard use in electromagnetic induction research. Properly devised and applied, these methods can reduce the influence of unusual data (outlier) in the response (electric field) variable, but often not sensitive to exceptional predictor (magnetic field) data, which are termed leverage points. A bounded influence estimator is described which simultaneously limits the influence of both outlier and leverage point, and has proven to consistently yield more reliable MT response function estimates than conventional robust approach. The bounded influence estimator combines a standard robust M-estimator with leverage weighting based on the statistics of the hat matrix diagonal, which is a standard statistical measure of unusual predictors. Further extensions to MT data analysis are proposed, including a establishment of data rejection criterion which minimize the influence of both electric and magnetic outlier in frequency domain based on statistical distribution of electromagnetic field. The rejection scheme made in this study seems to have an effective performance on eliminating extreme data, which is even not removed by BI estimator, in frequency domain. The effectiveness and advantage of these developments are illustrated using real MT data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8A
• /
• pp.1298-1310
• /
• 2001

이 논문에서는 채널 상태가 천천히 변할 때, 직교 주파수 분할 다중화-부호분할 다중접속 시스템에 적합한 채널 추정 방법을 제안하고 성능을 분석한다. 제안한 채널 추정 방법은 시간과 주파수 영역 모두에 파일럿 심볼을 삽입하고, 이산 퓨리에 변환 후 영을 채워 넣는 방법을 이용한 내삽법으로 모든 부채널의 전달 함수를 얻는다. 또한 변환 영역에서 저대역 여파를 통해 받은 파일럿 신호에 존재하는 가산성 백색 정규 잡음의 영향을 상당히 줄일 수 있다. 이 때 저대역 여파기의 차단 주파수는 채널의 다중경로 수에 따라 정해진다. 같은 방법을 이용한 내삽법을 시간축으로 적용하여 시간에 따라 변하는 부채널의 채널 응답을 얻을 수 있다. 이 논문에서는 여러 가지 내삽법에 대한 평균 제곱 오차 성능을 수식적으로 제시한다. 제안한 저대역 여파를 결합한 내삽법을 쓰면 채널의 통계적 특성에 관한 정보 없이, 그리고 훨씬 적은 계산량으로 선형 최소 평균 제곱 오차 추정기와 비슷한 성능을 얻는다. 레일리 감쇄 채널에 대한 모의 실험을 통해 같은 비트 오류율에 대한 신호 대 잡음 비의 이득이 있음을 보인다.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.191-192
• /
• 2017

본 6-스텝 운전은 하드웨어의 수정 없이 운전 영역을 확장할 수 있다는 장점을 가진다. 하지만, 샘플링 주파수 대비 기본파 주파수가 크면 저주파수 전류 맥동 문제가 발생한다. 이는 시스템의 효율을 낮추고 안정성 문제를 일으킨다. 따라서, 본 논문에서는 가변 시간 제어 방법을 제안한다. 선형화과정을 통해 정확한 전달 함수를 구하고, 이를 이용하여 추가적인 약 자속 제어기나 전류 지령 생성기 없이 6-스텝 운전을 구현 할 수 있다.