• Journal of Sasang Constitutional Medicine
• /
• v.11 no.1
• /
• pp.137-157
• /
• 1999

The purpose of this study is to help classifying Sasang Constitution through correlation with sound characteristic. This study was done it under the suppose that Sasang Constitution has correlation with sound spectrogram. The following result were obtained about correlation between sound spectrogram and Sasang Constitution by comparison and analysis 1. Soeumin answered his voice low tone, smooth and quiet in the survey. Soyangin answered his voice high, clear, fast and speaking random. Taeumin answered his voice low, thick and muddy. 2. Taeyangin was significantly slow compared with the others in the time of reading composition. Taeyangin was significantly slow compared with the others in Formant frequency 1. Taeyangin was significantly discriminated from Soeumin in Formant frequency 5. Taeyangin was significantly low compared with the others in Bandwidth 2. Soeumln was significantly low compared with Taeyangin in Pitch Maximum and Pitch Maximum-Pitch Minimum. Taeyangin was significantly high compared with the others in Energy mean. 3. In list of specification, the discrimination rate was higher than that by lists of 13 in the results of Multi-dimensional 4-class minimum-distance. The discrimination rate of three disposition except Soyangin was higher than that of four disposition in the results of One way ANOVA and Analysis of dis crimination in SPSS/PC+. In CART, the estimate rate of Sasang Constitution discrimination was higher than any other method. It is considered that there is a correlation between sound spectrogram and Sasang constitution according to the results. And method of Sasang constitution classification through sound spectrogram analysis can be one method as assistant for the objectification of Sasang constitution classification.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.3
• /
• pp.275-284
• /
• 2004

This paper discusses how to control the compensation voltages in dynamic voltage restorers (DVR). On analyzing the power circuit of a DVR system, control limitations and control targets are presented for the voltage compensation in DVRs. Based on the preceded power stage analysis, a novel controller for the compensation voltages of DVRs is proposed by a feed forward control scheme. This paper discusses also the time delay problems in the control system of DVRs. Digitally controlled DVR systems normally have control delay at amount of one sampling time of the control system and a half of the switching period of the DVR inverter. The control delay in digital controllers increases the dimension of the system transfer function one degree higher, which makes the control system more complicate and more unstable. This paper proposes a guide line to design the control gain, appropriate output filter parameters and inverter switching frequency for DVRs with digital controllers. Proposed theory is verified by an experimental DVR system with a full digital controller.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.5 s.305
• /
• pp.19-26
• /
• 2005

In this paper, a new method for obtaining three-dimensional shape of an object by measuring relative blur between images using wavelet analysis has been described. Most of the previous methods use inverse filtering to determine the measure of defocus. These methods suffer from some fundamental problems like inaccuracies in finding the frequency domain representation, windowing effects, and border effects. Besides these deficiencies, a filter, such as Laplacian of Gaussian, that produces an aggregate estimate of defocus for an unknown texture, can not lead to accurate depth estimates because of the non-stationary nature of images. We propose a new depth from defocus (DFD) method using wavelet analysis that is capable of performing both the local analysis and the windowing technique with variable-sized regions for non-stationary images with complex textural properties. We show that normalized image ratio of wavelet power by Parseval's theorem is closely related to blur parameter and depth. Experimental results have been presented demonstrating that our DFD method is faster in speed and gives more precise shape estimates than previous DFD techniques for both synthetic and real scenes.

• Broadcasting and Media Magazine
• /
• v.16 no.4
• /
• pp.31-45
• /
• 2011

사용자가 원하는 3D 사운드 혹은 소리의 공간감을 원하는 대로 재현할 수 있는 오디오 시스템은 오랜 기간 동안 인류가 가지고 싶었던 꿈의 기계였다. 그러나 과연 개인 혹은 사용자가 원하는 3D 사운드라는 것이 무엇이며 어떻게 정의하여야 하는지는 명확하지 않다. 이것은 매우 주관적인 개념일 뿐만 아니라 개인에 따라 다를 수 있으며, 그 평가에 대한 객관적인 방법 또한 존재하지 않는다. 관련된 연구를 살펴보면, 원하는 소리의 파동 전파 자체를 시공간 상에서 물리적으로 재현하는 WFS(Wave Field Synthesis)나 Ambisonics, 또는 머리전달함수(HRTF: Head Related Transfer Function)를 기반으로 한 많은 연구들이 있다. 이렇게 재현된 음장(sound field)을 보면 이들이 인지되고 평가되는 등의 객관화를 위하여는 청취 환경에 따라 그 특성이 바뀌고 동일한 환경에서도 청취자에 따라 다르게 인지되는 근본적인 문제점을 가지고 있다. 음장 재현 방법의 이러한 근본적인 문제는 놀랍게도 과거의 스테레오 시스템에서 볼 수 있는 밸런스 노브(balance knob)로부터 그 해결의 실마리를 찾을 수 있다. 밸런스 노브는 보편적인 최적의 소리를 찾는 대신에 청취자가 원하는 음향 효과를 얻을 때까지 직접적으로 소리를 청취하고, 스스로 조절하여 평가할 수 있는 매개체의 역할을 수행한다. 만일 밸런스 노브와 같이 청취자가 원하는 3D 사운드를 스스로 평가하고 조절하기 위한 방법을 마련할 수 있다면? 즉, 청취자가 시공간적으로 원하는 3D 사운드를 실시간으로 청취하고 변화시킬 수 있는 인터페이스를 구현할 수 있다면? 과연 그러한 것이 어떻게 가능할 수 있는지 체계적인 검토가 이루어질 수 있다면 매우 좋을 것이다. 본 고는 이러한 것을 가능케 할 수 있는 즉, 청취자가 자유 자재로 원하는 음장을 형성할 수 있는 렌더링 기법 및 즉각적인 피드백이 가능한 인터페이스를 소개하고 있다. 인터페이스는 현재까지 오디오 시스템에서 주로 사용되는 주파수 이퀄라이져(frequency equalizer)와 매우 유사한 특징이 있다. 이러한 점을 감안하여 "Spatial Equalizer$^{(R)}$"라는 이름을 붙여 보았다. Spatial Equalizer$^{(R)}$는 공간 상에 하나의 점 또는 다수의 점으로 표시되는 가상 음원을 사용자가 조종하여 원 소리의 공간감을 제어할 수 있도록 구성되어 있다. 공간 상에 다수의 점 음원들의 위치를 변화시키거나 크기를 변화시킴으로써 청취자가 원하는 공간감을 구현할 수 있도록 하고 있다. 중요한 것은 종전의 이퀄라이져와 같이 Spatial Equalizer$^{(R)}$에 의해 형성되는 음장이 어떤 객관적인 척도에 의해서 평가되는 대신 사용자에 의해 직접 주관적으로 평가되고, 선택된다는 점이다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.23-29
• /
• 2001

In the SP series of glasses, the formation of droplet is well done with increasing PbO. But in the case SP-1, droplet could not be observed in low concentration PbO. These results are considered that PbO does the role of a network modifier, so the crosslinking break down by $SiO_2$. But, in the glasses contained PbO above 50 mol%, glasses are formeddue to $Pb^{4+}$ ion does the role of a network former. As a result of electrical conductivity analysis for SP series of glasses, the electrical conduction is due to bipolaron at high temperature, and it is due to single polaron hopping at low temperature. In the SP series of glasses, electrical conduction mechanism coincide with the correlated-barrier hopping(CBH) model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.271-280
• /
• 2007

This paper presents a power control scheme for OFDM based wireless communication systems in a multicell environment with co-channel interference which enables each system to achieve its target level of transmission bit rate. Generally, the optimal or near optimal power control scheme for multicarrier systems is Down to control the power level of each subcarrier in accordance with the associated channel status, which may be found in WF(waterfilling) and WF(iterative waterfilling) schemes. However, this requires the channel state information associated with every subchannel to be fed back from the receiver to its transmitter for successful power control. If the wireless channel exhibits relatively fast fading or the number of subcarriers is large, this may result in a considerable overhead. Here, in order to alleviate this problem, we propose a power control strategy for an OFDM systems maintaining the same power level over all the subcarriers. Also we prove its convergence, compare its complexity with that of the existing IWF algorithm, and examine its convergence characteristic through computer simulations.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1643-1653
• /
• 1992

A method, which uses analytical or numerical modal analysis results, e.g. from finite element analysis, to select desirable response measurement and excitation points for an efficient modal testing is introduced. First, points of master degree of freedom(DOP) are determined so as to statistically minimize errors between responses of a full order model and those estimated from the reduced order model. Such master DOF's are selected as the response measurement points. Then a criterion named 'driving point model constant(DPMC)' related to the magnitudes of resonance peaks of the driving point freqency response functions used to select the point of excitation out of the master DOF's. In this work, the method is demonstrated through applications to modal testing on a one dimensional cantilever beam and an aluminum plate and the results are compared with those by another technique. also, the method is applied to a two dimensional structural component of a passenger car.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.1-6
• /
• 2005

The ability to predict radar return from flying vehicles becomes a critical technology issue in the development of stealth configurations. Toward developing a CEM code based on Maxwell's equations for analysis of RCS reduction schemes, an explicit upwind scheme suitable for multidisciplinary design is presented. The DFFT algorithm is utilized to convert the time-domain field values to the frequency-domain. A Green's function based on near field-to-far field transformation is also employed to calculate the bistatic RCS. To verify the numerical calculation the two-dimensional field around a perfectly conducting cylinder is considered. Finally results are obtained for the scattering electromagnetic field around an airfoil in order to illustrate the feasibility of applying CFD based methods to CEM.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.190-200
• /
• 2014

The video-based system of the broadcasters and the video-related institutions have shifted from analogical to digital in worldwide. This migration process can generate a defect, digital dropout, in the quality of the contents. Moreover, there are limited researches focused on these kind of defects and those related have limitations. For that reason, we are proposing a new method for feature extraction emphasizing in the peculiar block pattern of digital dropout based on discrete cosine transform (DCT). For classification of error block, we utilize support vector machine (SVM) which can manage feature vectors efficiently. Further, the proposed method overcome the limitation of the previous one using continuity of frame by frame. It is using only the information of a single frame and works better even in the presence of fast moving objects, without the necessity of specific model or parameter estimation. Therefore, this approach is capable of detecting digital dropout only with minimal complexity.

• Journal of the Korean Institute of Gas
• /
• v.7 no.2 s.19
• /
• pp.48-53
• /
• 2003

This study is to look at the effect for deformation of carbon steel for high-presure pipe, on the AE signals produced by tensile test. Acoustic emission(AE) has been widely used in various fields because of its extreme sensitivity, dynamic detection ability and location of growing defects. We investigated a relationship failure mode and AE signals by tensile test, From the tensile test, we could divide into four ranges of the failure modes of elastic range, yield range, plastic range before $\sigma$u, plastic range after $\sigma$u. And failure behaviors of elastic range, yield range, plastic range before $\sigma$u, plastic range after $\sigma$u could be evaluated in tensile test by AE counts, accumulation counts and time frequency analysis. It is expected to be basic data that can protect a risk according to tensile test and bending of pipe material for pressure vessel, as a real time test of AE.