• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1857-1864
• /
• 2013

In 21 century, it is difficult to define the limit of home automation, Recently, based on the advanced digital communication technology and necessity, The scope of the home automation has widened to home energy management, integrated reading of home and home health care etc. beyond the existing home automation. However, those methodologies reduce the efficiency and economy, and make it harder to realize a compact home automation because those methodologies are proposed independently without a unified standard. Therefore, this paper investigates and analyzes these methodologies, and then proposes an advanced home automation system that enables a compact design and improves the efficiency and economics of the home automation system based on the analyzed result.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.339-344
• /
• 2019

In this paper, a digital home electric overload alarm system based on DSP for smart home automation which can minimize electrical fire damage caused by an home electrical overload was made experimentally. To verify the validity of the home electrical overload alarm technology, an electric overload alarm performance evaluation system which can artificially generate the electrical overloads was designed, developed, and constructed, and the effectiveness of the overload alarm developed by the overload test was verified. In particular, an overload test EMTP model based on EMTP-RV was developed, and simulation and measurement results obtained from the overload test were compared, and the reliability of overload performance verification results was confirmed.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.15-24
• /
• 2014

The study presents work information classification system of apartment house which can organize all construction management services throughout the planning and management of a construction such as the decomposition of the design process, the assembly of construction process and cost estimating, etc. In addition, the study suggested a way to connect work information classification system based on a relational database in working order and built a conceptual model for automated cost estimating by utilizing established data base. A conceptual model for automated cost estimating will resolve the fundamental problems of the existing cost estimating system and will be able to take advantage of scientific cost estimating system at the construction site of apartment house.

• 보일러설비
• /
• s.57
• /
• pp.120-127
• /
• 1998

• Electric Engineers Magazine
• /
• s.165
• /
• pp.65-71
• /
• 1996

• Electric Engineers Magazine
• /
• s.164
• /
• pp.25-35
• /
• 1996

• Korean Architects
• /
• no.1 s.273
• /
• pp.22-49
• /
• 1992

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.1
• /
• pp.53-66
• /
• 2012

Gangform compared with conventional wood and steel form is systemized form which has a capability to install and dismantle form at a time without repeating to assembly and disassembly small members. Gangform compared with ACS has some problems such as 1) Tower Crane load increase, 2) increase in safety incidence during climbing Gangform, 3) decrease in detachment operation productivity, 4) stop work due to climate impacts, and 5) decrease in labor cost, productivity, quality. A conceptual design model of automated Gangform climbing system is suggested for apartment housing construction to show its technical/economic feasibility and workers' safety while increasing operation productivity and concrete quality.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.5
• /
• pp.8-13
• /
• 1993

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1991.10a
• /
• pp.261-267
• /
• 1991

다품종소량생산의 특징을 갖고 있는 금형공업에서 컴퓨터통합생산시스템(Computer Integrated Manufacturing System;CIMS)의 실현을 위한 중요한 분야의 하나는 부품설계도면으로부터 최종제품을 생산하는데 필요한 공정계획의 자동화, 즉 컴퓨터를 이용하여 공정계획을 자동적으로 생성하는 자동공정계획시스템(Computer Aided Process Planning;CAPP) 기술의 개발이다. 국내외적으로 CAPP분야의 연구는 컴퓨터 지원에 의한 자동화 기술의 급속한 발전과 더불어 지난 20여년 동안에 기계가공품에 관한 CAPP은 약 150여가지가 개발되었으나, 이는 컴퓨터 지원에 의한 설계의 자동화(Computer Aided Design;CAD)나 컴퓨터 지원에 의한 제조의 자동화(Computer Aided Manufacturing;CAM)분야에 비해 상대적으로 저조한 형편이다. 특히 금형을 대상으로 한 CAPP시스템의 개발은 아직 초기단계에 있기 때문에, 본 연구에서는 사출금형을 대상으로 하여 실용성이 있는 공정설계시스템을 개발함을 목적으로 한다. 일반적으로 공정계획은 "소재로부터 제품을 경제적, 효율적으로 생산하는데 필요한 제조공정의 체계적인 결정"이라고 정의할 수 있다. 공정계획은 제품의 종류와 수량, 재료와 부품의 종류, 보유 생산설비와 제조기술의 수준에 따라 다르나, 공정설계(Process Design)와 작업설계(Operation Design)로 구분할 수 있다. 본 연구에서는 공정계획을 광의의 공정설계로 정의하고, 공정설계와 공정계획을 동의어로 통용토록 한다. 기존의 CAPP시스템의 개발에 관한 기본적인 접근방법은 변성형방법(Variant method), 창성형방법(Generative method) 및 자동화방법(Automatic method)이 있다. 이들 CAPP시스템을 개발할 때 사용하는 기법은 크게 5가지- (1) GT(group Technology) 접근기법, (2) Bottom-up 접근기법, (3) Top-down 접근기법, (4) AI와 전문가시스템(Expert System) 접근기법, (5) 컴퓨터 프로그래밍 언어 - 로 분류할 수 있다. 본 연구에서는 전문가시스템 기법을 도입해서 사출금형 공정계획전문가의 지식과 경험을 획득하여 지식베이스를 구축하고, 전문가시스템 셀(shell)중 CLIPS를 이용하여 자동공정계획시스템인 Mold CAPP을 개발하였다.PP을 개발하였다.