• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.283-283
• /
• 2011

본 연구에서는 XRR 측정에 있어 박막두께 표준보급을 하기 위하여 표준물질을 이온빔 스퍼터링 증착법을 이용하여 제작하였다. 시편제작 시 공기 중 노출에 의해 산화가 되지 않는 산화물 박막과 산화물 기판을 선택하였다. 기판 및 타겟물질 등을 변화시키면서 제작된 시편의 특성을 살펴보았다. 사용된 타겟 물질로는 HfO2, Ta2O5, Cr2O3를 사용하였으며, 기판으로는 glass, sapphire, quartz, SiO2(1 ${\mu}m$-thermal oxidation)를 사용하였다. 산화물 타겟을 사용하여 증착 시 타겟 주위로 생기는 전하들의 charge build-up 되는 현상은 neutralizer를 사용함으로써 문제를 해결하였다. 제작된 시편은 XRR을 이용하여 측정하였고, XRR simulation과 curve fitting을 통하여 박막의 두께, 표면 및 계면의 거칠기, 밀도를 평가하였다. 기판으로 사용된 glass, quartz는 타겟 물질과 관계없이 표면 거칠기가 좋지 않아 XRR 반사율이 급격히 떨어지면서 측정되는 각도의 영역이 작아졌다. sapphire로 제작한 시편에서는 측정된 데이터와 simulation의 curve fitting이 양호하지 않았다. 이 문제는 현재 조사중에 있다. SiO2 기판으로 제작한 시편의 경우 타겟 물질과 관계없이 XRR curve fitting 결과가 양호 하였다. 그 중 Cr2O3의 결과가 다른 타겟 물질에 비해 x 2 값이 작았고 반사율 곡선에서의 거칠기와 진폭도 양호하였다. 위 연구결과로써 SiO2 기판을 사용한 Cr2O3 타겟 물질로 제작된 시편이 XRR 박막 두께 표준물질로써 적합한 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1234-1243
• /
• 1990

Double coaxial are jets(annular and coaxial air jets) between which propane gas is fed was selected to study the structure of diffusion flames in turbulent shear flow. Schlieren and direct photographs are taken to visualize the flame structure. Mean and fluctuating temperatures and ion currents were measured to investigate the macroscopic and the instantaneous flame structure. The objective of this study is to understand the interaction between combustion and mixing process especially in the transition region of turbulent shear flow. The investigation reported in this paper focuses on the macroscopic and the instantaneous structures of three flames obtained. The increased mixing effect resulting from increase of Reynolds number of central air jet makes the flame bluish and short. When the velocity of surrounding air stream is higher than that of central air jet, the instantaneous flame structure is composed of coherent structure. It is considered that the flame structure of transitional region of mixing layer depends on the structure of mixing layer of non-reacting conditions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.4
• /
• pp.291-302
• /
• 2004

Blast-induced anisotropic rock damage around a blast-hole was analyzed by a using numerical method with user-defined subroutine based on continuum damage mechanics. Anisotropic blasting pressure was evaluated by applying anisotropic ruck characteristics to analytical solution which is a function of explosive and rock properties. Anisotropic rock damage was evaluated by applying the proposed anisotropic blasting pressure. Blast-induced isotropic rock damage was also analyzed. User-defined subroutines to solve anisotropic and isotropic damage model were coded. Initial rock damages in natural ruck were considered in anisotropic and isotropic damage models. Blasting pressure and elastic modulus of rock were major influential parameters from parametric analysis results of isotropic rock damage. From the results of anisotropic rock damage analysis, blasting pressure was the most influential parameter. Anisotropic rock damage area in horizontal direction was approximately 34% larger and about 12% smaller in vertical direction comparing with isotropic rock damage area. Isotropic rock damage area under fully coupled charge condition was around 30 times larger than that under decoupled charge condition. Blasting pressure under fully coupled charge condition was estimated to be more than 10 times larger than that of decoupled charge condition.

• Journal of Korea Water Resources Association
• /
• v.35 no.1
• /
• pp.25-36
• /
• 2002

Window Probability Matching Method(WPMM) is achieved by matching identical probability density of rain intensities and radar reflectivities taken only from small window centered about the gage. The equation of $Z_{e}-R$ relationship is obtained and compared with data between a DWSR-88C radar and high density rain gage networks within 150km from radar site in summer season, 1998. The probability density of radar effective reflectivity is distributed with high frequency near 15dBZ. The frequency distribution of rain intensities shows that rain intensity is lower than 10mm/hr in most part of radar coverage area. As the result of $Z_{e}-R$ relationship using WPMM, curved line has shown to the log scale spatially and it can be explained more flexible than any straight-line power laws at the transformation to the rainfall amount from $Z_e$ value. During 3 months, total radar cumulative rainfall amount estimated by $Z=200R^{1.6}$ and WPMM relationships are 44 and 80 percentages of total raingage amount, respectively. Therefore, $Z_{e}-R$ relationships by WPMM may be widely needed a statistical method for the computation of accumulated precipitation.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.266-272
• /
• 2003

This study was conducted to evaluate effects of 2 constructed wetlands with different vegetation states (plumpton park wetland and Woodcroft park wetland) for reducing non-point source pollution from small watershed consisted of residential and agricultural area in suburban district of Sydney, Australia. The total nitrogen and phosphate removal efficiency of Plumpton park constructed wetland, composed of stable and dense vegetation, were 38.3% and 26.2% and Woodcroft park constructed wetland having still poor vegetation due to the short time to settle down transplanted plants after construction, showed relatively low removal efficiency of 20.2% and 14.0%. The removal efficiency of inorganic nutrients such as $NH_4-N$, $NO_3-N$, $PO_4^{-3}$ were higher than total nitrogen and phosphate because plants and microorganisms in rhizosphere of constructed wetlands took up inorganic nutrients shortly. According to the type of wetland inflow, the nutrients removal efficiency of storm water flow was lower than base flow.

• Explosives and Blasting
• /
• v.36 no.4
• /
• pp.35-47
• /
• 2018

In this study, several concrete-block blast tests and AUTODYN numerical analyses were conducted to analyze the effects of different stemming and coupling materials on explosion results. Air, sand, and polymer gel were used as both the stemming and coupling materials. The stemming and coupling effects of these materials were compared with those of the full-charge condition. Soil-covered or buried concrete blocks were used for field crater tests. It was found from the concrete block tests and numerical analyses that both the crater size and the peak pressure around the blast hole were higher when the polymer gel was used than when the sand and the decoupling condition were used. The numerical analyses revealed the same trend as those of the field tests. Pressure peaks in concrete block models were calculated to be 37, 30, and 16 MPa, respectively, for the cases of the polymer gel, sand, and no stemming and decoupling condition. The pressure peak was 52 MPa in the case of full-charge condition, which was the highest pressure. But the damage area for the case was smaller than that obtained from the use of polymer gel. Full-charge was also used as a reference test.

• Journal of the Korean Society of Radiology
• /
• v.82 no.1
• /
• pp.139-151
• /
• 2021

Purpose To retrospectively evaluate the chest computed tomography (CT) findings of coronavirus disease 2019 (COVID-19) in patients with mild clinical symptoms at a single hospital in South Korea. Materials and Methods CT scans of 87 COVID-19 patients [43 men and 44 women; median age: 41 years (interquartile range: 26.1-51.0 years)] with mild clinical symptoms (fever < 38℃ and no dyspnea) were evaluated. Results CT findings were normal in 39 (44.8%) and abnormal in 48 (55.2%) patients. Among the 48 patients with lung opacities, 17 (35.4%) had unilateral disease and 31 (64.6%) had bilateral disease. One (2.1%) patient showed subpleural distribution, 9 (18.8%) showed peribronchovascular distribution, and 38 (79.2%) showed subpleural and peribronchovascular distributions. Twenty-two (45.8%) patients had pure ground-glass opacities (GGOs) with no consolidation, 17 (35.4%) had mixed opacities dominated by GGOs, and 9 (18.8%) had mixed opacities dominated by consolidation. No patients demonstrated consolidation without GGOs. Conclusion The most common CT finding of COVID-19 in patients with mild clinical symptoms was bilateral multiple GGO-dominant lesions with subpleural and peribronchovascular distribution and lower lung predilection. The initial chest CT of almost half of COVID-19 patients with mild clinical symptoms showed no lung parenchymal lesions. Compared to relatively severe cases, mild cases were more likely to manifest as unilateral disease with pure GGOs or GGO-dominant mixed opacities and less likely to show air bronchogram.

• Progress in Medical Physics
• /
• v.10 no.1
• /
• pp.1-7
• /
• 1999

In this study, the dose distributions of a $^{32}$ p uniform cylindrical volume source and a surface source, a pure $\beta$emitter, were calculated in order to obtain information relevant to the utilization of a balloon catheter and a radioactive stent. The dose distributions of $^{32}$ p were calculated by means of the EGS4 code system. The sources are considered to be distributed uniformly in the volume and on the surface in the form of a cylinder with a radius of 1.5 mm and length of 20 mm. The energy of $\beta$particles emitted is chosen at random in the $\beta$ energy spectrum evaluated by the solution of the Dirac equation for the Coulomb potential. Liquid water is used to simulate the particle transport in the human body. The dose rates in a target at a 0.5mm radial distance from the surface of cylindrical volume and surface source are 12.133 cGy/s per GBq (0.449 cGy/s per mCi, uncertainty: 1.51%) and 24.732 cGy/s per GBq (0.915 cGy/s per mCi, uncertainty: 1.01%), respectively. The dose rates in the two sources decrease with distance in both radial and axial direction. On the basis of the above results, the determined initial activities were 29.69 mCi and 1.2278 $\mu$Ci for the balloon catheter and the radioactive stent using $^{32}$ P isotope, respectively. The total absorbed dose for optimal therapeutic regimen is considered to be 20 Gy and the treatment time in the case of the balloon catheter is less than 3 min. Absorbed doses in targets placed in a radial direction for the two sources were also calculated when it expressed initial activity in a 1 mCi/ml volume activity density for the cylindrical volume source and a 0.1 mCi/cm$^2$ area activity density for the surface source. The absorbed dose distribution around the $^{32}$ P cylindrical source with different size can be easily calculated using our results when the volume activity density and area activity density for the source are known.

• Geophysics and Geophysical Exploration
• /
• v.9 no.4
• /
• pp.271-278
• /
• 2006

Investigations of underground cavities are required to provide useful information for the reinforcement design and monitoring of the ground subsidence areas. It is, therefore, necessary to develop integrated geophysical techniques incorporating different geophysical methods in order to accurately image and to map underground cavities in the ground subsidence areas. In this study, we conducted geophysical investigations for development of integrated geophysical techniques to detect underground cavities at the field test site in the ground subsidence area, located at Yongweol-ri, Muan-eup, Muan-gun, Jeollanam-do. We examined the applicability of geophysical methods such as electrical resistivity, electromagnetic, and microgravity to cavity detection with the aid of borehole survey results. The underground cavities are widely present within the limestone bedrock overlain by the alluvial deposits in the test site where the ground subsidences have occurred in the past. The limestone cavities are mostly filled with groundwater or clays saturated with water in the site. The cavities, thus, have low electrical resistivity and density compared to the surrounding host bedrock. The results of the study have shown that the zones of low resistivity and density correspond to the zones of the cavities identified in the boreholes at the site, and that the geophysical methods used are very effective to detect the underground cavities. Furthermore, we could map the distribution of cavities more precisely with the study results incorporated from the various geophysical methods. It is also important to notice that the microgravity method, which has rarely used in Korea, is a very promising tool to detect underground cavities.

• Korean journal of applied entomology
• /
• v.51 no.1
• /
• pp.1-7
• /
• 2012

Silver-grey or dark brown scaring, or dark brown discolored damages caused by the yellow tea thrip, $Scirtothrips$ $dorsalis$ Hood (Thysanoptera: Thripidae) have occurred on citrus fruits cultivated in the open field in east-south area orchards of Jeju Island since 2007. The weekly population of yellow tea thrips adults caught with a yellow sticky trap increased gradually from early May and peaked in late August, 2009. In 2010 and 2011, the most population was in early October. The yellow tea thrips of some species usually dominated from July in open citrus fields, and seven generations, at least, had occurred from May to late October 2009 by a yellow sticky trap survey. In 2009, $S.$ $dorsalis$ larva were observed from July and with peaks from late August to mid September and early October on citrus fruits. The damage symptoms appeared in the mid September. In 2011, the population peaks were in early July and late September, and the symptoms increased continually from mid July to late October. The symptoms were silver-scars or initial dark discolorations and then gradually changed to dark-brown discolorations or dark-brown scars. The percent of damaged fruits were 0.9%, 0.4%, 0.8% and 2.7% in 2008, 2009, 2010 and 2011, respectively, by survey in 64 typical orchards in Jeju Island. We are the first to report symptoms of the yellow tea thrip ($Scirtothrips$ $dotsalis$) on citrus fruits.