• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.13-22
• /
• 2011

In this study, ultimate strengths of 51 continuous reinforced concrete deep beams were evaluated by the ACI 318M-08's strut-tie model approach implemented with the presented indeterminate strut-tie model and load distribution ratio of the companion paper. The ultimate strengths of the continuous deep beams were also estimated by the shear equations derived based on experimental results, conventional design codes based on experimental and theoretical shear strength models, and current strut-tie model design codes. The validity of the presented strut-tie model and load distribution ratio was examined through the comparison of the strength analysis results classified according to the primary design variables of shear span-to-effective depth ratio, flexural reinforcement ratio, and concrete compressive strength. The present study results of ultimate strengths obtained using the indeterminate strut-tie model and load distribution ratio of the continuous deep beams agree fairly well with those obtained using other approaches. In addition, the present approach reflected the effect of the primary design variables on the ultimate strengths of the continuous deep beams consistently and accurately. Therefore, the present study will help structural designers to conduct rational and practical strut-tie model designs of continuous deep beams.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.503-511
• /
• 2008

This paper presents the results of an analytical and experimental study on the performance of reinforced concrete beams subjected to pure torsion. The main parameters of the experimental tests were amount of torsional reinforcement and the ratio of the transverse torsional reinforcement to the longitudinal torsional reinforcement. The test results indicated that the maximum amount of torsional reinforcement required in ACI 318-05 code underestimated almost twice as much as the observed maximum amount of torsional reinforcement. Comparisons between the tested and calculated torsional behaviors of the 102 beams showed that the torsional failure modes of ACI 318-05 code disagreed with the observed failure modes. In addition, the torsion provisions in ACI 318-05 code overestimate the torsional strength of the RC beams in which relatively large amount of torsional reinforcement were reinforced, while underestimate for the beams with small amount of torsional reinforcement. This discrepancy between the theoretical ultimate torsional strength as given by the ACI 318-05 code and the experimental one can be due to neglecting the tension stiffening effect and the contribution of the torsional strength by concrete.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.4
• /
• pp.935-946
• /
• 2016

In this paper, we analyzed wage determinants of the vocational high school graduates utilizing both individual-level and work region-level variables. We formulate the models in the way wage determination has multi-level structure in the sense that individual wage is influenced by individual-level variables (level-1) and work region-level (level-2) variables. To incorporate dependency between individual wages into the model, we utilize hierarchical linear model (HLM). The major results are as follows. First, it is shown that the HLM model is better than the OLS regression models which do not take level-1 and level-2 variables simultaneously into account. Second, random effects on sex, maester dummy and engineering dummy variables are statistically significant. Third, the fixed effects on business hours and mean wage of regular job for level-2 variables are statistically significant effect individual-level wages. Finally, parental education level, parental income, number of licenses and high school grade are statistically significant for higher individual-level wages.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.5
• /
• pp.1375-1387
• /
• 2016

The purpose of this study was to evaluate the effect of exercise on cognitive function in the elderly through a systematic literature review and meta-analysis. For the study purpose, 14 studies were selected through a systematic process of using several databases and 11 studies were used to estimate the effect size of exercise on cognitive function. Meta-analysis was performed using a random effects model, and the effect size on cognitive function was calculated. The effect size for cognitive function of exercise intervention was Hedges' g=1.05 (95% CI: 0.61~1.50), indicating a large effect size. For heterogeneity, moderator analysis was performed using intervention, number of times per week, intervention duration, and cognitive function measurement. Cognitive function measurement was statistically significant, the other moderators did not significant difference. Results support that exercise has significant positive effects on cognitive function in elderly in korea. It also provided a basis that can be applied to exercise intervention design for cognitive function.

• Journal of the Economic Geographical Society of Korea
• /
• v.13 no.4
• /
• pp.548-560
• /
• 2010

This study aims to estimate the payment of farmland reverse mortgage(FRM) and to explore policy considerations about the restructuring of rural area after the initiation of farmland reverse mortgage. Farmland reverse mortgage provides stable monthly income basement for the welfare of rural elderly by liquidating fixed asset such as farmlands which the elderly in rural area owns. The main results of this study can be summarized as follows. First, FRM model based on Housing Equity Conversion Model, which is suggested by Rodda et al (2003), was built. Then, critical factors like farmland value rising rates and interest rates were elaborated, and affordable and proper monthly payment were estimated. 246,982 won, 419,374 won and 757,379 won is given to the borrower at age 65, 75 and 85 respectively with 100,000,000 won value farmland. Second, policy considerations which are necessary for the successful launch of FRM, and restructuring of rural area after launching FRM were discussed. Three policy considerations were proposed. First is about the integrated asset management system for rural elderly people. Second is about the reasonable settlement of corporate farmers system. And third is about the preparations for rural land use planning.

• Korean Journal of Social Welfare
• /
• v.56 no.1
• /
• pp.155-179
• /
• 2004

This study is about the effectiveness and activation strategies of vacational training programme for the disabled guided by the Ministry of Labour and the Korea Employment Promotion Agency for the Disabled(KEPAD). This research employed quantitative approach. The quantitative research used the samples of 853 disabled people who had finished vocational training programme during recent 3 years. In this research the effectiveness is categorized into two ; product effectiveness and employment effectiveness. Product effectiveness is influenced by the kind of train-center, train-area, train-length. The KEPAD, non-IT job area and train-period over 6 month are more effective. Employment effectiveness is significantly influenced by demo-sociological factor rather than disability factor. Especially the kind of train-center is very important to be employed for the disabled. This implicates that choice of train-center by the disabled and effective management of it by the public sector is very important in developing employment. Effective management, stated above, includes reengineering programmes and functions accountable to the need form the trainee, bridging the gap among train-centers in terms of performance, differentiation of financial support according to the product to save the public fund, encouraging one special programme in one train-center.

• Korean Journal of Social Welfare
• /
• v.52
• /
• pp.5-32
• /
• 2003

This paper examines the labor entry of conditional welfare recipients. This paper focuses on two questions. First, what is the percentage of conditional welfare recipients who have labor entry? Second, what are the predictors in the labor entry and the duration to the entry? Using Data about 917 welfare recipients who participated in the self-sufficiency programs of the Offices for Secure Employment in Seoul, this paper attempts to answer the above questions. Logistic regression analysis and survival analysis are adopted to identify variables predicting labor entry of conditional welfare recipients. This paper also utilizes a multiple imputation method to deal with the limitation of data by the missing values in some variables. The major findings are as follows: about 43.8% of the conditional welfare recipients have successful labor entry; and in the labor entry and the duration to the entry, gender, household, information and referral services for employment, health and willingness for self-sufficiency are the predictors that are statistically significant. Among these variables, health and willingness for self-sufficiency are more noticeable; it is recognized that programs to care for health of welfare recipients who want to have the labor entry and counseling programs to strengthen welfare recipients' willingness for labor entry are very important for them to be successful in the labor entry. This paper provides a basic knowledge about realities of the conditional welfare recipients' labor entry, identifies research areas for further research, and develops policy implications for their self-sufficiency.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.423-431
• /
• 2011

Recentincreasing awareness of the environmental damage caused by the $CO_2$ emission of fossil fuelsstimulated the interest in alternative and renewable sources of energy. Fuel cell is a representative example of hydrogen energy utilization. In this study, Molten Carbonate Fuel Cell system is simulated by using $Aspen^{TM}$. Stack model is consisted of equilibrium reaction equations using $ACM^{TM}$(Aspen Custom Modeler). Balance of process of fuel cell system is developed in Aspen $Plus^{TM}$ and simulated at steady-state. Analysis of performance of the system is carried out by using sensitivity analysis tool with main operating parameters such as current density, S/C ratio, and fuel utilization and recycle ratio.In Aspen $Dynamics^{TM}$, dynamics of MCFC system is simulated with PID control loops. From the simulation, we proposed operation range which generated maximum power and efficiency in MCFC power plant.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.516-521
• /
• 2012

This study developed a simple model to investigate effects of important operating parameters on performance of a bubbling-bed adsorber and regenerator system collecting $CO_2$ from flue gas. The chemical reaction rate was used with mean particles residence time of a reactor to determine the extent of conversion in both adsorber and regenerator reactors. Effects of process parameters - temperature, gas velocity, solid circulation rate, moisture content of feed gas - on $CO_2$ capture efficiency were investigated in a laboratory scale process. The $CO_2$ capture efficiency decreased with increasing temperature or gas velocity of the adsorber. However, it increased with increasing the moisture content of the flue gas or the regenerator temperature. The calculated $CO_2$ capture efficiency agreed to the measured value reasonably well. However the present model did not agree well to the effect of the solid circulation rate on $CO_2$ capture efficiency. Better understanding on contact efficiency between gas and particles was needed to interpret the effect properly.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.217-222
• /
• 2012

The synthesis of dimethyl carbonate(DMC) is a promising reaction for the use of naturally abundant carbon dioxide. DMC has gained considerable interest owing to its versatile chemical reactivity and unique properties such as high oxygen content, low toxicity, and excellent biodegradability. In this study, the synthesis of DMC through the transesterification of ethylene carbonate(EC) with methanol was investigated by using ionic liquid and metal oxide catalysts. The screening test of different catalysts revealed that choline hydroxide ([Choline][OH]) and 1-n-butyl-3-methyl imidazolium hydroxide([BMIm][OH]) had better catalytic performance than metal salts catalysts such as MgO, ZnO and CaO. The effects of reaction parameters such as reaction temperature, MeOH/EC mole ratio, and carbon dioxide pressure on the reactivity of [Choline][OH] catalyst were discussed. High temperature and high MeOH/EC mole ratio were favorable for high conversion of EC. However, the yield of DMC showed a maximum when carbon dioxide pressure was 1.34 MPa, and then it decreased for higher carbon dioxide pressure. Zinc chloride($ZnCl_2$) was used as co-catalyst with the ionic liquid catalyst. The mixed catalyst showed a synergy effect on the EC conversion and DMC yield probably due to the acid-base properties of the catalysts.