• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1420-1427
• /
• 2012

We investigated the physiological activity and solvent-partitioned fractions of methanol extracts from the green seaweed Sargassum fulvellum. The methanol extract from S. fulvellum was sequentially fractionated with n-hexane (SFMH), methanol (SFMM), buthanol (SFMB), and water (SFMA). We investigated the antioxidant activities of solvent fractions from S. fulvellum by using 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging capacity and an SOD activity assay. DPPH radical scavenging capacity of SFMM was 79.5% at 10 mg/ml. SOD activity of SFMM was 79.9% at 10 mg/ml. Nitrite scavenging activities of solvent fractions from S. fulvellum were investigated under different pH conditions and showed the most remarkable effect at pH 1.2. In particular, the activity of SFMB was higher than the other fractions. ADH activity and ALDH activity of SFMM were 177.0% and 167.4% at 10 mg/ml, respectively. ${\alpha}$-Glucosidase inhibitory activity of SFMH increased in a dose-dependent manner and was about 94.1% at 2 mg/ml. Elastase inhibitory activity was 93.2% at 2 mg/ml. These results revealed that S. fulvellum extracts have strong antioxidant and alcohol dehydrogenase activities and ${\alpha}$-glucosidase inhibitory activity, suggesting that S. fulvellum extracts have potential as a source of natural products for health and beauty.

• Journal of Fashion Business
• /
• v.24 no.5
• /
• pp.106-124
• /
• 2020

The purpose of this study was to analyze the three-dimensional (3D) characteristics and reproducibility of the effective expression of North American smocking pleats in the process of making clothes using a 3D virtual clothing system (CLO) and present a method of expression according to the types of North American smocking. In this study, lattice, lozenge, and flower smocking were produced as real smocking and 3D virtual content, and actual muslin properties were measured using a Fabric Kit and reflected using an emulator. The results of this study confirmed that a dense puckered design such as North American smocking could be expressed depending upon the internal line, fold angle, and reinforcement setting for 3D smocking. To partially apply pleats to flat fabrics, it was necessary to set fold lines. The fold line setting could be expressed by designing the internal line in horizontal, vertical, and diagonal directions according to the North American smocking design, and then setting the fold angle for each internal line. By setting fold angles of 0 degrees and 360 degrees according to the folding direction of the set internal line, the fabric was clearly folded and stable pleats were created. This study will contribute to the vitalization of the 3D virtual fashion content industry by analyzing and presenting the optimal expression method of sophisticated and complex pleats generated according to the North American smocking design pattern.

• Korean Journal of Food Science and Technology
• /
• v.40 no.4
• /
• pp.436-442
• /
• 2008

Hydroxyproline and Pro-Hyp dipeptide are the digestive products of collagen hydrolysate called collagen peptide. Some suggested that collagen peptides could improve aged or damaged skins, however, the effects of collagen peptides on the skin have not been known. In this study, we investigated the effects of digestive products of collagen peptides, hydroxyproline and Pro-Hyp dipeptide on skin quality using the UV-damaged dorsal skin of hairless mouse as a model system. Female SKH hairless mice were pre-irradiated with UV for 7 weeks, and then hydroxyproline, Pro-Hyp dipeptide were orally administered for 7 weeks with UV irradiation. Wrinkle formation (by replica image), skin elasticity, barrier status (by TEWL, transepidermal water loss), epidermis thickness, and biophysical changes in the stratum comeum (by hematoxylin & eosin staining) were examined. With the oral peptide treatment, effects such as skin barrier maintenance, anti-skin thickening, and recovery of the stratum corneum were observed. These results indicate that oral intake of collagen peptides may have beneficial effects on damaged skin cells.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.3
• /
• pp.213-219
• /
• 2008

Microscale heat transfer and microfluidics have become increasingly important to overcome some very complex engineering challenges. The use of very small passages to gain heat transfer enhancement is a well documented method for achieving high heat flux dissipation. In this study, the performance evaluation of micro-channel plated heat exchangers with straight, V-shaped and Y-shaped channels has been experimentally carried out under the counterflow condition. It is found that the mixing effect in V-shaped and Y-shaped channels enhances the heat transfer but pressure drop does not increase seriously in the range of low Reynolds number.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.198-201
• /
• 2004

This paper aims to investigate the micro-mechanical behaviour of tow geometry with forming pressures and densities of foams during the curing process of plain weave carbon fibre fabric prepregs onto polymer foams. In order to find out and compare deformation patterns between different forming conditions, tow parameters such as amplitude and crimp angle etc. are investigated. From the observation results, geometric difference in the tow architecture with respect to forming conditions and foam characteristics were found. To observe the micro-deformation of the fabric structure, appropriate specimens from carbon fibre-foam sandwich structures are sectioned and observed under the microscope.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.229-234
• /
• 2007

Microscale heat transfer and microfluidics have become increasingly important to overcome some very complex engineering challenges. The use of very small passages to gain heat transfer enhancement is a well documented method for achieving high heat flux dissipation. As the passage size is decreased, the heat transfer performance increases but the pressure drop increases sharply when the passage size is reduced. In this study, the performance evaluation of micro plated heat exchangers under the counter flows with straight, V-shaped and Y-shaped channel are carried out.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.1
• /
• pp.33-40
• /
• 2014

Poly vinylidene fluoride-co-hexafluoropropylene (PVdF-HFP) membrane were prepared by the electrospinning technique. We had applied a DLC coating process and then the surface of the membrane and the contact angle change was investigated. Electrospun fibrous PVdF-HFP membrane surface became to wrinkled shape by Ar plasma treatment and treatment conditions. The wrinkled surface of PVdF-HFP membrane became super-hydrophilic. However, after DLC coating process, it became super-hydrophobic. The resulting surfaces were characterized by water contact angle measurement, X-ray photoelectron spectroscopy (XPS) and field emission scanning electron microscopy (FE-SEM). Resultantly it was recognized that the wettability characteristics of the membrane surfaces depended on the chemical composition and surface morphology.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.13-18
• /
• 1976

1) The variation of the reef knot strength $T_r$ and the trawler knot strength $T_\varrho$ with the angle $\varphi$ between the adjacent bars are given by $$T_r=T_{ro}-k_{r\varphi}$$ and $$T_\varrho=T_{{\varrho}o}+k_{\varrho\varphi}$$ where $T_{ro}$ and $T_{{\varrho}o}$ are values of $T_r$ and $T_\varrho$ at $\varphi=0^{\circ}$ respectively, and $k_r$ and $k_\varrho$ constants decided by the fibre materials of netting twines ($\varphi\;is\;0^{\circ}$ when the knot is pulled lengthwise). 2) The variation of the reef knot strength $T_r'$ and the trawler knot strength $T_\varrho'$ with the angle $\varphi'$ between any one bar and the plane made by the other three bars may be expressed by $$T_r'=T_{ro}{'}\varrho^{-c\varphi'}$$ and $$T_\varrho'=T_{{\varrho}o}{'}\varrho^{-c\varphi'}$$ where $T_{ro}{'}$ and $T_{\varrho}o{'}$ are values of $T_r{'}$ and $T_\varrho{'}$ at $\varphi'=0^{\circ}\;{(\varphi=45^{\circ})}$ respectively, and o is the coefficient of attenuation. 3) Knot strength of knotted netting may be expressed by the expression derived in the preyious paper, disregarding its shape and the direction of tensile loads acting on it.

• Journal of Life Science
• /
• v.22 no.8
• /
• pp.1092-1098
• /
• 2012

This study was carried out to discover the skin wrinkle reducing components in the seeds of Arctium lappa. The isolation of a methylene chloride-soluble fraction of 70% ethanol extract from the seeds of Arctium lappa using a procollagen type-1 synthesis and MMP-1 activity resulted in the isolation and identification of four lignin compounds: arctiin, arctigenin, matairesinol, and diarctigenin. All structures were confirmed via NMR and MS spectroscopic data. To determine cell viability and procollagen type-1 synthesis, human dermal fibroblasts were treated with 10-100 ${\mu}M$. As a result, none of the four compounds showed cytotoxicity up to 50 ${\mu}M$. We also investigated their procollagen type-1 synthesis and MMP-1 inhibition activity and found that arctiin had the highest activity in terms of both procollagen synthesis and MMP-1 inhibition among all four compounds. Putting all the data together, we suggest that arctiin be used in cosmetics as an anti-wrinkle material.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.355-364
• /
• 2023

Lips have a unique desquamation process and moisturizing properties that are structurally different from ordinary skin. In particular, the turnover cycle of the stratum corneum is fast and the outermost stratum corneum is thin, so the amount of keratin is relatively high, and there are no skin appendages, so it is very vulnerable to maintaining moisture. In this study, we set three targets for lip care : stratum corneum, moisture, and barrier, and aimed to identify the potential of three target-specific ingredients for lips improvement. We confirmed the exfoliating, moisturizing, and barrier improvement efficacy of three target-specific ingredients which also have mild exfoliating effect. Specifically, we verified that Bacillus clausii extract improved skin exfoliation, gluconolactone improved skin moisture retention, and serine reinforced skin barrier function. To test the in vivo efficacy of the complex composed of three target-specific ingredients on the human lips, the lip balm manufactured with non-irritating range of concentration was applied, and we confirmed that it was effective in improving lip exfoliation·moisturizing·elasticity·wrinkles. Consequently, it was confirmed that the beauty and health indicators of the lips could be improved through the exfoliation-moisturization-barrier care of the lips and these ingredients were applied to LG H&H LIPCERIN products.