• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.309-315
• /
• 2021

Pycnogenol extracted from pine bark is a component with great antibacterial activity and antioxidant effect. It is applied as a natural anti-inflammatory agent with various medical effects including anti-inflammatory effects, regulation of blood pressure, regulation of the immune system, and inhibition of cancer cell growth. However, research related to cosmetics is limited. Therefore, in this study, the effect of Pycnogenol on the skin was studied through a clinical approach. Changes in skin condition were observed after using cosmetics with Pycnogenol and without Pycnogenol for 6 weeks for 10 clinicians in each group. We observed the effect of pore reduction, wrinkle reduction around eyes, a decrease of the number and angle of loose pores, and reduction of pigmentation. Therefore, cosmetics containing Pycnogenol have the effect of improving skin problems of aging skin.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.597-605
• /
• 2013

This study was conducted in warty sea squirt farm, Jindong Bay(10 stations; July, October, January, April) for the culture period of Styela clava, Styela plicata. We utilized water temperature, chlorophyll a, suspended particulate matter, hydrodynamics, salinity and dissolved oxygen saturation for the suitability assessment of warty sea squirt farm. Newly, Life Requisite Suitability graphs were made for the correlation between the growth of Styela clava, Styela plicata and farm environment. As a result of the assessment for Habitat Suitability Index, western bay(HSI 0.32~0.41) show values higher than eastern bay(HSI 0.19~0.27). This result shows the high correlation with the unit production of Styela clava, Styela plicata($R^2$=0.834, P<0.01). This could be helpful for fishery management for the sustainable productivity through the scientific suitable site assessment.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.4
• /
• pp.312-318
• /
• 2013

Morphological characters of aggregated achenes, and achene and its epidermal microstructures were observed for 7 taxa belonging to the section Adonanthe of subgenus Adonanthe [A. amurensis Regel et Radde, A. bobroviana Sim., A. davidii Franch., A. multiflora Nishikawa et Ko. Ito, A. pseudoamurensis W. T. Wang, A. ramosa Franch. and A. tianschanica (Adolf) Lipsch. ex Bobrov] and for 1 taxon belonging to the section Lophocarpa of subgenus Adonis (A. aestivalis var. parviflora M. Bieb.). The morphological characters such as shape of aggregated achenes, length of aggregated achenes, shape of achene, and recurved type of persistent style were useful in the classification of the subgenera Adonanthe and Adonis, and each species of the series under section Adonanthe. Epidermal microstructures of achene were grouped into three types according to the presence of microwrinkles and their arranged patterns. These microwrinkles were absent in A. amurensis, were of parallel type in A. bobroviana, A. pseudoamurensis, A. ramosa, and A. aestivalis var. parviflora, and were of parallelperpendicular mixed type in A. davidii, A. multiflora, and A. tianschanica. Also, a new key to them was made using morphological characters of their aggregated achenes and achene.

• Journal of KIISE:Software and Applications
• /
• v.32 no.3
• /
• pp.181-191
• /
• 2005

This article describes a simplified mathematical model and the relevant numerical algorithm to simulate the draped cloth on virtual human body. The proposed algorithm incorporates an elliptical, or non-consecutive, method to simulate the cloth wrinkles on moving bodies without resorting to the result of the past time-steps of drape simulation. A global-local analysis technique was employed to decompose the drape of cloths into the global deformation and the local wrinkles that will be superposed linearly The global deformation is determined directly by the rotation and the translation of body parts to generate a wrinkle-free yet globally deformed shape of cloth. The local wrinkles are calculated by solving simple elliptical equations based on the orthogonality between conjugate harmonic functions representing the wrinkle amplitude and the direction of wrinkles. The proposed method requires no interpolative time frames even for discontinuous body postures. Standing away from the incremental approach of time integration in conventional methods, the proposed method yields a remarkable reduction of CPU time and an enhanced stability. Also, the transient motion of cloth could be achieved by interpolating between the deformations corresponding to each static posture.

• Composites Research
• /
• v.14 no.1
• /
• pp.22-29
• /
• 2001

The purpose of this paper is to determine the effect of the autoclave inner pressure rate, heat-up rate, tool round angle, Thickness of core, height of joggle on defects, and to minimize the defects of aircraft sandwich structure reinforced with honeycomb core occurred in autoclave processing. The results showed that the geometry of aircraft sandwich structure and tool such as tool round angle, thickness of core, height of joggle, and the autoclave cure conditions such as inner pressure rate, heat up rate strongly affected the core movement, core wrinkle, bridge phenomenon of prepreg and depression of core that occurred in autoclave processing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.4
• /
• pp.293-298
• /
• 1976

1) The decrease in strength of netting twines at the twisted joint is regarded to be due mainly to tile frictional force between plied yarns, but tile rate of decresae is within $5\%$ in filament twines and 5 to $10\%$ in spun twines. 2) The variation of the twisted joint strength with the angle between the two adjacent bars draws a parabola flaying the minimum value at tile angle of $90^{\circ}$. The minimum value was revealed as about $90\%$ of the strength at the angle of $0^{\circ}$ in wet spun twiness, but regarded to hi negligibly small filament twines. 3) The knot strength is about $30{\pm}5\%$of the twisted joint strength.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.308-311
• /
• 2010

본 연구에서는 유한요소해석을 통하여 나선 주름모양 소방용 파이프를 모델링하여 각 모델간의 발생응력과 변형량을 상호간에 비교 검토하여 강도 안전성이 우수한 배관시스템의 설계 최적화를 하기 위함이 연구의 목적이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9C
• /
• pp.756-760
• /
• 2010

This paper is proposed to an novel facial behavior recognition system for driver's fatigue detection. Facial behavior is shown in various facial feature such as head expression, head pose, gaze, wrinkles. But it is very difficult to clearly discriminate a certain behavior by the obtained facial feature. Because, the behavior of a person is complicated and the face representing behavior is vague in providing enough information. The proposed system for facial behavior recognition first performs detection facial feature such as eye tracking, facial feature tracking, furrow detection, head orientation estimation, head motion detection and indicates the obtained feature by AU of FACS. On the basis of the obtained AU, it infers probability each state occur through Bayesian network.

• The Korean Journal of Mycology
• /
• v.24 no.1 s.76
• /
• pp.25-37
• /
• 1996

Antifungal and antibacterial activities of 108 extracts from 36 species of mushrooms in Korea were screened. The powder of fruiting body of each mushroom was extracted with petroleum ether, 80% ethanol and distilled water subsequently. Among these, five extracts including the ethanol extract of Agaricus subrutilescens, seven extracts including the water extract of Amanita virosa, nine extracts including the water extract of Amanita pantherina and twenty five extracts including the water extract of Lycoperdon perlatum showed antibiotic activities against yeasts, fungi, Gram-negative bacteria and Gram-positive bacteria, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.7-14
• /
• 2011

Soft copper tube is one of the popular materials which are used for shipbuilding, automobiles, and freezing and HVAC equipment. However, these materials have problems that they cause occasionally outside wrinkle, spring back, wall thinning phenomena. In this study, to avoid these phenomena, was manufactured a mild materials devoted bending machine, which selected a bending method where the mandrel presses the pipe along with the sliding guide rail during bending process. During the course of confirming this performance, it was found that as the diameter of copper tube used for materials became smaller, the spring back phenomenon increased. And as the bending angle became larger, it became larger. In addition, we could manufacture mold products which scarcely generated wrinkle when bending copper tubes.