• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.119-129
• /
• 2004

A three dimensional (3D) method of analysis is presented for determining the free vibration frequencies and mode shapes of thick, circular and annular plates with nonlinear thickness variation along the radial direction. Unlike conventional plate theories, which are mathematically two dimensional (2D), the present method is based upon the 3D dynamic equations of elasticity. Displacement components u/sub s/, u/sub z/, and u/sub θ/ in the radial, thickness, and circumferential directions, respectively, are taken to be sinusoidal in time, periodic in θ, and algebraic polynomials in the s and z directions. Potential (strain) and kinetic energies of the plates are formulated, and the Ritz method is used to solve the eigenvalue problem thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four digit exactitude is demonstrated for the first five frequencies of the plates. Numerical results we presented for completely free, annular and circular plates with uniform linear, and quadratic variations in thickness. Comparisons are also made between results obtained from the present 3D and previously published thin plate (2D) data.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.153-159
• /
• 1997

In a stiffened plate reinforced on one of its sides by beam type stiffeners, the asymmetry about the plate mid-plane induces coupling between flexural wave and longitudinal wave. In this research interactions between flexural and longitudinal wave motion are analyzed in a stiffened plate which is reinforced only in one direction. The plate is modelled as a beam to which offset spring-mounted masses are attached at regular intervals. Propagation constants of the coupled waves and corresponding characteristic waves are derived by using periodic structure theory, and a computer code is developed. Also, sample calculations are carried out and the results are discussed.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.90-98
• /
• 2006

본 연구에서는 체철공장에서 래이들 카의 매우 높은 열에 주기적으로 빈번히 노출되는 공동가대의 열적 피해에 대한 체계적인 평가를 수행하였다 먼저 실험과 함께 유한요소법을 사용한 열해석이 수행되었다. 기존 공동가대와 향후 설치될 신 공동가대 모두에 대한 적합한 기준을 검증하기위하여 가장 심각한 상태에 대한 열평가가 포함되었다. 또한 공동가대에 적합한 방열판의 설계를 위하여 실험결과에 근거한 수치해석이 사용되었다. 마지막으로 새로 설치될 공동가대의 안전성과 내구성을 평가하기위한 피로해석을 수행하였다. 6m 신형공동가대의 열응력해석 및 피로해석 결과 기존 공동가대보다는 취약하나 설치 및 사용에는 문제가 없음을 확인하였다.

• Journal of Korean Library and Information Science Society
• /
• v.39 no.3
• /
• pp.345-368
• /
• 2008

This study investigated the general problems concerning the subject Computer Science in the KDC(Korean Decimal Classification) 4th edition based on the comparative analysis with DDC, NDC, Disciplinary Classification System of Korean Research Foundation and National Standard Science and Technology Classification and Science and Technology Classification of Korea Science and Engineering Foundation, and suggested some ideas for the improvements of them. The subject of Computer science in the KDC 4th edition will be helpful to be improved to integrate in classes 004-005 now separated into two main classes of 000(004-005) and 500(566) in KDC4, to systematize subdivisions, to add new subjects, to delete and relocate some inappropriate subjects and to add notes.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.159-169
• /
• 1998

The purpose of this study is to analyze the radiation characteristics of the shaped Cassegrainian antenna. Radiation pattern of the sub-reflector is calculated by GTD (Geometrical Theory of Diffraction) The complete radiation patterns are obtained by summing the reflect field from the surface and the diffracted fields from the edge. The first and the second derivative on the sub-reflector are calculated by the local interpolation technique. The Radiation characteristics of the main-reflector are obtained by integrating the surface current density, which is derived from PO approximation. The radiation integral is expanded by the Jacobi-Bessel series for the purpose of reducing the computation time.

• The KIPS Transactions:PartA
• /
• v.10A no.2
• /
• pp.173-180
• /
• 2003

This paper proposes Remote Educating Communication Tool (RECT) that allows students and teachers to communicate using Web-based Bulletin Board System. The distance teaching using DCOM (Distributed Component Object Model) voice module is used to enhance academic accomplishments for students in computer class. The DCOM voice module to be used in distance learning is designed, implemented and applied to teachers and students in the computer class in order to measure and analyze academic results. The RECT server provides Q&A sessions between students and teachers in the BBS using recording and playback functions. The client RECT includes recording and playback functions. The client module of RECT receives and uses DCOM module. When recording, the client transmits voice files with the recorded content to the server.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.551-556
• /
• 2004

The purpose of this study was to suggest a systematic and scientific method for measurement of children's growth development, in which the accuracy of existing diagnosis method has not been concretely examined yet. The most popular method for diagnosis of children's growth is to analyze the opening degree of growth plate in each joint by X-ray image. However, X-ray method has some disadvantages; it is impossible to measure the diagnosis of growth periodically and repeatedly due to the radiation problem. Hence, this study introduced a profile analysis and the algorithm of analyzing the image of growth plate with the BUA(Broadband Ultrasound Attenuation) of calcaneus, to verify the possibility of alternative ultrasonic method harmless to human body. We obtained the images of growth plate in proximal tibiae, phalanges, and calcanei of 269 children (7∼16 years old) with X-ray. And the image of growth plate in calcanei was also obtained front those children with ultrasound. The results showed that the time of the opening degree of growth plate in each joint was almost consistent between X-ray and ultrasonic images. Also, the images of growth plate measured by X-ray and ultrasound showed the high correlation. Therefore, it is expected that the algorithm of ultrasonic profile analysis introduced in this study can replace the existing X-ray method to measure the growth plate correctly.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.482-490
• /
• 2013

Although the flat plate system is an efficient structural type due to the simplicity of its construction, the low story height, and the various plan design, the slab-column connections are vulnerable to punching shear failure from gravity load and eccentric shear failure from lateral load. To prevent the structure collapse, various construction methods of slab-column connection reinforcement are developed but none of these satisfies all of structural performance, economics, and constructability. This paper presents the reinforcement of slab-column connection with lattice bars. The structural performance is confirmed with the interior slab-column connection tests subjected to cyclic loading, and the economic feasibility is demonstrated from the structural design under the same condition with lattice bars, stud rails, and stirrups.

• Journal of Korean Library and Information Science Society
• /
• v.36 no.1
• /
• pp.353-370
• /
• 2005

The purpose of this study aims to provide possible suggestions for the improvement of the korean Decimal Classification System in 21th century through the analysis of history field as the subject of study. As a result of this study, some problems(for example, irrational classification number system, very simplicity of $\lceil$Table of Geographic Areas. Historical Periods. Persons$\rfloor$. improper development of class 900, necessity of some internal tables and $\lceil$Table of Racial, Ethnic, National Groups$\rfloor$, insufficiency of note etc.) were found out. This study can be useful for the future revision of KDC4 because a revolutionary improvement were provided.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.3
• /
• pp.53-60
• /
• 1997

Generally, a safety estimation based on the buckling strength is carried out to evaluate the strength of plate members in the design process of ship hull structures and more accurate and efficient tool for the buckling strength estimation of enormous plate members of ship structure is naturally demended for saving design process. While, in the reason that the design codes of classification societies do not consider the various effects or include some effects roughly, considerate safe side results are suggested occasionally. In this study, advanced buckling strength estimation system prepared various classification buckling evaluation codes and new evaluation code considering the effects of in-plane tension, plate boundary condition, lateral load & residual stress is developed using the window management system of engineering workstation. Additionally maximum deflection estimation formula is equipped for the increase of fabrication reliability of thin plate ship structure. From this evaluation system, more reliable buckling safety of plate panel will be guaranteed in the ship hull design stage. In order to expand the use of this system pc version system will be developed sooner or later.