• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.96-119
• /
• 2015

This research has studied the changes of Gwi-po(轉角包) by taking the cases of China's medieval wooden buildings as objects. The purpose of the study is to examine the time-periodic transition process of Gwi-po through the cases of 71 wooden buildings which were built from Tang(唐) dynasty(AD 618~690 & 705~907) until Jin(金) dynasty(AD 1115~1234) and also designated as 'Major Historical and Cultural Sites Protected at the National Level'. This research has taken note of various frame types of Jwau-dae(左右隊), which are architectural components of Gwi-po, to study the changes and development process of Gwi-po. The results are as follows. An important factor in the transformations of Gwi-po format is the changes in perception of the craftsmen about Jwau-dae, who took charge in the building process. In the early periods, the principles of Yidou sanshen dougong(一斗三升) in constructing ancons of Gwi-po had been well-maintained, while there appeared many different types of Gwi-po in later periods, due to the usage of Jwau-dae and $Shu{\check{a}}$ $t{\acute{o}}u$(?頭) in each Chulmok of Gwi-po. Transitional types of Gwi-po, which were evolved from the earlier ones, are divided into 3 categories by different forms of Jwau-dae, placed on odd number stages. The first one is 'none-$f{\bar{a}}ng$ $t{\acute{o}}u$(無枋頭) type' of Song(AD 960~1127, 1127~1279) and Liao dynasty(AD 907~1125) buildings, which doesn't have $f{\bar{a}}ng$ $t{\acute{o}}u$(枋頭)s, for the reason that Jwau-dae(左右隊) is in direct contact with Gwihan-dae(耳限大). The second one is '$Shu{\check{a}}$ $t{\acute{o}}u$ $f{\bar{a}}ng$ $t{\acute{o}}u$(?頭枋頭) type' of Song(AD 960~1127, 1127~1279) and Jin dynasty(AD 1115~1234), that has $f{\bar{a}}ng$ $t{\acute{o}}u$(枋頭)s of Jwau-dae(左右隊) identical to $Shu{\check{a}}$ $t{\acute{o}}u$(?頭) in form. The last one is '$Xi{\check{a}}o$ $g{\check{o}}ng$ $t{\acute{o}}u$(小?頭) type' of Jin(AD 1115~1234) and Yuan dynasty(AD 1271~1368), which has $f{\bar{a}}ng$ $t{\acute{o}}u$(枋頭)s of Jwau-dae identical to $Xi{\check{a}}o$ $g{\check{o}}ng$ $t{\acute{o}}u$(小?頭) in form. The earlier forms of Gwi-po, which appeared between Tang dynasty(AD 618~690 & 705~907) and Five Dynasties periods(907~960) went through transitional forms of 'non-$f{\bar{a}}ng$ $t{\acute{o}}u$(無枋頭) type', '$Shu{\check{a}}$ $t{\acute{o}}u$ $f{\bar{a}}ng$ $t{\acute{o}}u$(?頭枋頭) type' and '$Xi{\check{a}}o$ $g{\check{o}}ng$ $t{\acute{o}}u$(小?頭) type' and finally had its form settled between Yuan(元, AD 1271~1368) and Ming(明. AD 1368~1644) dynasty periods. In Liao(遼) dynasty period(AD 907~1125), as the buildings got bigger and the tendency of longer eave-exposure was implemented, there grew a certain need to structurally reinforce Gwi-po, on which load of the whole roof is concentrated. Especially, the transition from Tōuxīn $z{\grave{a}}o$(偸心造) style to Jì xīn $z{\grave{a}}o$(計心造) style in this period had a great influence on standardization of Gwi-po, along with None-${\acute{A}}ng$(無仰) style. Furthermore, Wing-type Gong(翼型?), which developed in Liao dynasty(AD 907~1125), is also thought to have had a great influence on the transition from Tōuxīn $z{\grave{a}}o$(偸心造) style to Jì xīn $z{\grave{a}}o$(計心造) style by changing the forms of Gongs(?), such as Gwi-po. However, unlike None-${\acute{A}}ng$(無仰) style, there occurred a gradual change from '$Shu{\check{a}}$ $t{\acute{o}}u$ $f{\bar{a}}ng$ $t{\acute{o}}u$(?頭枋頭) type' to '$Xi{\check{a}}o$ $g{\check{o}}ng$ $t{\acute{o}}u$(小?頭) type' of Gwi-po in $Xi{\grave{a}}$ ${\acute{a}}ng$ style.

• Radiation Oncology Journal
• /
• v.23 no.2
• /
• pp.123-130
• /
• 2005

Purpose: We wanted to improve the setup reproducibility of breast cancer patients when utilizing a commercially available breast board for radiation therapy. The breast board was modified by using a new head rest and 2 types of board fixation devices. Materials and Methods: A conventional head/neck rest was modified to be positioned in various slots of the breast board, and it was fabricated 1 cm thinner to provide more comfort to a patient when the patient's neck was rotated. This rest improves the uncertainty of the daily setup. Also, the sagging problems at the left and right sides became negligible with the two types of board fixation devices: (1) the stair type, and (2) the arm type. The first device consists of an upper/lower holder with 4 stair-types of grooves and 4 rectangular Inserts. In order to cover the whole range of vertical setup of the breast board, 4 rectangular inserts were needed, and each covered 10 steps. The arm-type fixation device was also fabricated and attached to the breast board, It had two aluminum bars that were fixed by utilizing a lock-type of screw. These devises were evaluated with two volunteers in order to prove the effectiveness of the improved setup accuracy. Results; The developed cranio-caudal fixation device demonstrated that it could reduce the cranio-caudal error by nearly $55\%$ compared to the old device. As for left-and-right inclination, the stair-type and arm-type fixation devices can reduce the relative inclination by nearly $80\%$ and $90\%$, respectively, compared to the breast board without the fixation device. Conclusion: It was verified that the developed devices were effective for positioning the patients and for avoiding inclination of the breast board.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1003-1015
• /
• 1988

Damping information is required to analyse heat exchangers for flow-induced vibration. The most important energy dissipation mechanisms in heat exchanger tubes are related to the dynamic interaction between tube and support. In liquids, squeeze-film damping is dominat. Simple experiments were carried out of a two-span tube with one intermediate support to investigate the effects of tube-support parameters, such as: tube-support thickness, diametral clearance, tube eccentricity, tube span length, location of tube-support, and nature of dynamic interaction between tube and tube-support. The results show that squeeze-film damping is much larger for lateral-type motion than for rocking-type motion at the support. Eccentricity was found to be very important. Diametral clearance, support thickness and frequency are also very relevant. The effects of these parameters on squeeze-film damping are formulated and proposed in a semi-empirical expression.

• Journal of the Korean hospital association
• /
• v.34 no.5 s.297
• /
• pp.55-63
• /
• 2005

신라천년의 고도로 삼국통일의 대업을 이룩하는데 견인차 역할을 한 화랑도의 함성이 메아리쳤던 경주! 동국대병원. 병원 앞을 흐르는 하천(형산강)엔 새하얀 자태를 뽐내며 백조가 무리지어 한가로이 노닐다 내원객을 반기기라도 하듯 날개짓을 하며, 정문 좌우측 석등은 불교재단 병원의 기품을 더해준다(사무실 부서명칭 푯말도 매우 인상적인 연꽃 엠블렘으로 장식).

• Journal of radiological science and technology
• /
• v.25 no.2
• /
• pp.83-83
• /
• 2002

국내 35개 병원의 44대의 CT장치를 대상으로 CT장치의 성능을 크게 7가지의 항목별로 구분하여 평가한 결과는 다음과 같았다. 물의 평균 CT number는 -18.9HU와 +68.6HU의 범위에 속했으며, 전체 장치의 평균은 $2.4{\pm}13.0\;HU$였다. 물의 평균 CT number의 권장수준을 -6과 +6로 하였을 경우 이에 적합한 장치는 35대(79.5%)였다. Contrast scale은 장치의 종류에 따라 많은 차이를 나타내었으나 평균은 $2.02{\pm}10^{-4}{\sim}1.665{\pm}10^{-5}$이었다. 직선성을 나타내는 상관계수는 0.984에서 0.992의 분포를 나타내었으며 평균은 $0.990{\pm}0.002$였다. 공간분해능은 0.60 m에서 1.25 mm의 분포를 나타내었으며 전체 장치의 65.9%에 해당되는 29대에서 0.75 mm의 공간 해상능을 나타내었다. 대조도 분해능은 3.2 mm(1/8인치)에서 19.1 mm(3/4인치)의 분포를 나타내었으며, 대조도 분해능의 권장수준을 6.4 mm 이하로 하였을 경우 측정 대상장치 44대 중 이에 적합한 장치는 37대(84.1%)였다. 슬라이스 두께의 설정치가 1 mm인 경우 측정치의 평균은 $2.0{\pm}0.6\;mm$이였으며, 설정치가 2 mm와 3 mm인 경우 측정치는 각각 $3.0{\pm}0.7\;mm$와 $3.5{\pm}0.6\;mm$이였다. 설정치가 5 mm와 7 mm인 경우 측정치는 각각 $5.1{\pm}0.6\;mm$, $7.0{\pm}0.5mm$이였다. 그리고 10 mm의 설정치에서는 $9.8{\pm}0.7\;mm$의 측정치를 나타내었다. 위치잡이용 중심선의 좌우방향의 편차는 -4.7 mm에서 +41.7 mm의 범위였으며, 상하방향의 편차는 -3.7 mm에서 +4.6 mm의 범위였다. 위치잡이용 중심선의 좌우 및 상하방향의 권장수준을 ${\pm}3.0\;mm$과 ${\pm}3.0\;mm$ 이하로 하였을 경우 41대의 측정 대상장치에서 이에 적합한 장치는 33대(80.5 %)였다.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.341-344
• /
• 2001

본 논문은 두 대의 카메라로 제안하는 물체의 색상, 움직임, 형태상의 특성을 이용하여 3차원 공간상의 움직임을 실시간으로 추출하는 것을 목적으로 한다. 본 논문에서 제안하는 물체는 구조상 물체 자체가 캘리브레이션 물체의 역할을 포함하여 캘리브레이션이 되지 않은 상황에서도 정확하게 물체의 3차원 정보를 추출할 수 있으므로 3차원 입력 디바이스로 이용할 수 있다. 3차원 움직임을 추출하기 위해 먼저 3차원 공간상의 물체와 좌우 영상의 상관관계를 구하고 좌우 즉 영상에서 원이 위치할 탐색영역은 MAWUPC 알고리즘을 이용하여 예측한다. 탐색영역 안에서 PCA를 사용하여 원의 정확한 위치를 찾으며 좌우 영상에서 얻은 원의 위치와 스테레오 카메라의 기하학적 구조를 종합하여 3차원 움직임을 추출한다. 추출한 3차원 움직임은 가상환경에서 가상 물체의 움직임을 제어하는데 응용할 수 있다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.2
• /
• pp.252-262
• /
• 1994

As a means to get a better understanding of the kind of form changes to which is subject the neck of the men, in its aging process, several measurement recordings on a vertical and horizontal sections were carried. Subjects were young, middle aged and elder men (15 in their twenties, 11 in their forties and again 11 in their sixties) 1) The analysis of the meansurement results led us to distinguish 3 types of subjects according to the position of the their Adam's apple with regard to the horizontal plane containing their 7th cervical vertebrae point : clearly above (Type I), next to(Type II), clearly below(Type III). We found that young men correspond to the Type I and II, middle aged men to the Type ll and 111 and elder men only to the Type III. 2) The comparison of the horizontal sectional surface contained in the planes corresponding to the 4 points, shows a larger sectional surface for elder men in the Adam's apple plane, accompanied by a change of position of the Adam's apple forwards. As for the front neck point plane, the body sectiolial surface is larger in depth in elder men, without much change in breadth. And for the acromion point plane, we observed also an increase in depth, but with a decrease in breadth corresponding partially to the atrophy of the thoraric cage in eldermen.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.11a
• /
• pp.60-62
• /
• 2001

습성침적은 여러 가지 기상 요소 중 대규모 강수량과 구름의 두께에 의해 큰 영향을 받는다. 실측치를 ADOM에 적용하여 습성침적 플럭스를 산정한 결과, $SO_2$의 침적 플럭스는 대규모 강수량과 구름 두께에 의해 좌우되고, sulfate의 침적 플럭스는 여름에 많고 겨울에 적은 전형적인 sulfate의 습성침적 패턴을 잘 따르며, 구름 내 $SO_2$의 산화정도에 따라 다르게 나타난다. 이상의 연구 결과들은 향후 산성 침적 모형을 사용한 다양한 조건에서의 습성침적 연구 및 나아가 습성침적 플럭스의 예측에 관한 선행 연구로서 도움을 줄 것으로 사료된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.260-260
• /
• 2004

연삭 가공은 대직경 반도체 웨이퍼의 경면 가공, 산업용 정밀 부품, 광학 분야의 고정밀급 렌즈 등 여러 산업 분야의 각종 정밀 부품의 마무리 공정에 적총되어 제품의 질을 좌우하는 필수적인 공정이라 할 수 있다. 이러한 연삭 가공은 높은 치수 정밀도와 양호한 표면 거칠기 및 제품의 형상을 동시에 만족시킬 수 있는 가공 기술로서 , 대직경 웨이퍼 생산에 있어서, 고정밀ㆍ고품위의 웨이퍼를 양산하는데 적합한 기술로 인식되고 있다.(중략)

• Tunnel and Underground Space
• /
• v.28 no.2
• /
• pp.170-185
• /
• 2018

The effect of fault on the stability of the closely-spaced twin tunnels located in fault zones was investigated by numerical analyses and scaled model tests on condition of varying widths, inclinations and material properties of fault. When obtaining the strength/stress ratios of pillar between twin tunnels, three different stresses were used which were measured at the middle point of pillar, calculated to whole average along the pillar section and measured at the left/right edges of pillar. Among them, the method by use of the left/right edges turned out to be the most conservative stability estimation regardless of the presence of fault and reflected the excavating procedures of tunnel in real time. It was also found that the strength/stress ratios of pillar were decreased as the widths and inclinations of fault were increased and as the material properties of fault were decreased on condition using the stresses measured at the left/right edges of pillar. As a result of scaled model tests, it was found that the model with fault showed less crack initiating pressure than the model without fault. As the width of fault was larger, tunnel stability was decreased. The fault had also a great influence on the failure behavior of tunnels, such as the model without fault showed failure cracks generated horizontally at the left/right edges of pillar and at the sidewalls of twin tunnels, whereas the model with fault showed failure cracks directionally generated at the center of pillar located in the fault zone.