• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.549-558
• /
• 2014

Buckling restrained braces(BRBs) developed as a seismic protection element, hysteretic damper, have been investigated in America and Japan mainly. BRBs are composed of a steel core and concrete-filled steel casing. It is one of the major causes of drop in productivity to fill the steel casing with concrete. To improve this problem, the BRB is introduced in which the steel core is restrained with a pair of semicircular springs. In this paper, the numerical and analytical investigation about the desirable configuration for a semicircular spring is presented. Firstly, the stiffness and strength of semicircular spring is determined theoretically to buckle into a very high-order modes. Then, the required stiffness and strength are calculated under the practical design conditions and considered as reference values to find a proper configuration. The material strength and thickness of semicircular spring are chose from the finite element analysis for 5 semicircular springs with varying height. Finally, the nonlinear buckling analysis of BRB with proper semicircular springs shows that the bucking strength of the whole BRB is very similar to the strength of steel core with length between semicircular springs.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.5
• /
• pp.112-122
• /
• 1999

이 논문은 일정체적을 갖는 양단고정 변단면 기둥의 좌굴하중 및 후좌굴 거동에 관한 연구이다. 기둥의 변단면으로는 직선형, 포물선형, 정현의 선형을 갖는세 가지 변단면을 채택하였다. Bernoulli-Euler 보 이론을 이용하여 압축하중이 작용하여 좌굴된 기둥이 정확탄성곡선을 지배하는 미분방정식을 유도하였다. 유도된 미분방정식을 Runge-Kutta 법과 REgula-Falsi법을 이용하여 수치해석하였다. 수치해석의 결과로 좌굴하중, 좌굴기둥의 평형경로 및 정확탄성곡선을 산출하였다. 또한 좌굴하중-단면비 곡선으로부터 최강기둥의 좌굴하중과 단면비를 산출하였다.

• Composites Research
• /
• v.34 no.2
• /
• pp.129-135
• /
• 2021

In this paper, in order to examine the effect of fiber volume fraction non-uniformity in thickness direction on the buckling load of cylindrical composite lattice structures, we modified the equation of buckling load of the cylindrical composite lattice structures proposed by Vasiliev. The thickness of each layer of the rib was varied by fiber volume fraction, and material properties were applied differently by using the rule of mixture. Also, we performed linear buckling analysis by varying the structure size, thickness, and average value of the fiber volume fraction of finite element model. Finally, by comparing the calculation results of the buckling load of the equivalent model using the modified buckling load equation and the results of the finite element analysis, we found that the fiber volume fraction non-uniformity in thickness direction can reduce the buckling load of the cylindrical composite lattice structure.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.103-114
• /
• 1992

A study result of buckling reliability is presented for the axially compressed imperfect elastic cylinder. Multi-mode analysis program is developed from Karman-Donnell Equation for the calculation of the buckling load of the cylindrical she1l. Geometric intial imperfection is approximated by double Fourier series of which coefficients are assumed random variables with jointly normal distribution characteristics. Crude Monte Carlo simulation technique is used to calculate the probabilistic failure properties of several cases with various imperfection Conditions.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.39-51
• /
• 1987

석유시추 보호관의 비선형 운동을 시뮬레이트하는 유효한 해법이 non-uniform grid 유한차분법과 implicit time 적분법에 근거하여 제시되었다. 극한 상태에 있는 지지 플랫폼의 상승 가속도에 의해 생기는 보호관의 동적 좌굴형 반응에 관하여 상세히 연구되었고, 이 반응에 미치는 중요 변수가 규명되었다. 운동의 현저한 감소와 이에 따른 응력들이 컴플라이언트 행오프(hang-off)를 적용시킴으로써 얻어졌다.

• Journal of the KSME
• /
• v.33 no.7
• /
• pp.614-627
• /
• 1993

좌굴하기 쉬운 구조물을 설계할 때는 반드시 좌굴특성에 대한 어떤 직관을 가져야 한다. 이글의 목적은 셸 구조물이 비선형붕괴(nonlinear collapse), 분기좌굴(bifurcation buckling) 또는 이들 모드의 조합에 의해서 어떻게 좌굴될 것인가에 대한 감각을 전하는데 있다. 이 불안정에 대한 직관적 이해는 보강되고 여러 요소들로 조립되며 분지셸(branched shell)을 갖거나 복잡한 벽구 조를 갖는 실제 셸 구조물 등의 많은 예에 의해서 얻어질 수 있다. 이 글에서는 수식의 개발이 아니라 불안정의 예측에 주안점을 두고 있으며, 큰 처짐과 소성의 조합에 의해 발생되는 비선 형좌굴과 결함민감도가 특히 강조된다. 또한 최적화된 구조물의 국부 및 전체 불안정, 좌굴모드의 상호작용, 그리고 결함민감도(imperfection sensitivity) 등이 예시된다.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.2
• /
• pp.191-200
• /
• 2001

This paper presents buckling analysis of the cylindrical shell subjected to axial loads using numerical method. The modeling method, appropriate element type, and number of element are recommended by comparing with analytical solution. Based on the parametric study, buckling stress decreases significantly as the diameter-thickness ratio increases. These results are different from those obtained from buckling analysis of columns. The number of buckling half-wave in circumferential direction decreases as the diameter-height ratio increases. Buckling stress increases 1~2% as the thickness of base plate increases. Therefore the effect of base plate on buckling strength for cylindrical shell can be disregarded. Buckling stress significantly decreases as the amplitude of initial geometric imperfection used for calculating buckling stress is developed and it shows a good agreement with numerical results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2263-2271
• /
• 2015

The thin cylindrical shell structure under compression should be checked with buckling stability. Initial imperfection effects on buckling strength has been investigated by many researchers. Even though there have been a number of these studies, more studies of buckling strength with various initial imperfections are still necessary. In Eurocode, there is a design parameter that is applicable only on specific imperfection by section thickness rather than on various initial imperfection. In this study, structural analyses, using geometry and material nonlinear analysis, of cylindrical buckling strength with various initial imperfection were performed and compared with Eurocode design strength and Finite Element Method (FEM) analysis results. Moreover, the modified design parameter, which gives more exact prediction result of buckling strength under bending with initial imperfection, is proposed for various initial imperfections.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.187-193
• /
• 2023

This paper presents the buckling behavior of a pile considering its self-weight. The differential equation and boundary conditions governing the buckling of partially embedded piles in nonhomogeneous soils are derived. The buckling load and mode shape of the pile are numerically computed by the Runge-Kutta method combined with the Regula-Falsi algorithm. The obtained numerical solutions for bucking loads agree well with the results available from the literature. Numerical examples are given to analyze the buckling load and mode shape of the piles as affected by the self-weight, embedment ratio, slenderness ratio and boundary condition of the pile as well as the aspect ratio and rigidity ratio of the subgrade reaction. It is found that the self-weight of the pile leads to the reduction of the buckling load, indicating that neglecting the effect of self-weight may overestimate the buckling load of partially embedded piles.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.3
• /
• pp.123-131
• /
• 2007

The buckling behavior of a fiber reinforced plastic pipe was researched. When a cylindrical structure is made of isotropic material, it shows two dimensional buckled shape which has same deformed section along the longitudinal direction. But an anisotropic cylindrical structure shows three dimensional buckled shape which has different deformed section along the longitudinal direction. Because the modulus of elasticity is varied in a certain direction when ply angles are changed, the strength of a pipe are changed as ply angles are changed. In this study, the limitation of two dimensional and three dimensional buckling mode was investigated and the buckling strength of a laminated composite pipe was evaluated.