Poly(acrylic acid) (PAA) microspheres is one of the widely-used polymeric materials for the bio-field application and the electric materials. For the synthesis of PAA microspheres, the polymerization technique using surfactants is applied. After the synthesis, the purification and separation processes are required for the removal of surfactant. When general organic solvents were used, many problems, such as huge amount of waste solvent, additional separation processes, and the possibility of residual media, were occurred. Thus, High-pressure Soxhlet extraction using liquid $CO_2$ was developed to solve these problems. In this study, High-pressure Soxhlet extraction of the synthesized PAA microspheres using liquid $CO_2$ was conducted for the removal of Monasil PCA which is used for the dispersion polymerization of acrylic acid in compressed liquid Dimethyl ether (DME). The morphology of the extracted PAA particles was checked by field emission scanning electron microscopy (FE-SEM) and the residual concentration of Monasil PCA was analyzed by inductively coupled plasma - Optical Emission Spectrometer (ICP-OES). For studying the effect of the solvent effect, Soxhlet extraction was conducted using n-hexane, liquid DME, and liquid $CO_2$. In case of n-hexane, some extracted PAA microspheres were produced. However, deformation was also occurred due to the high thermal energy of n-hexane vapor. Liquid DME could not remove Monasil PCA. When using liquid $CO_2$, the extracted PAA microspheres which were free for the residual solvent were produced without deformation. For finding the optimum operating condition, high-pressure Soxhlet extraction was conducted for 8 hours with changing the temperature of reboiler and condenser. When the extractor temperature is $19.6{\pm}0.2^{\circ}C$ and the pressure is $51.5{\pm}0.5$ bar, the best removal efficiency was obtained.
This research was carried out to examine the substitutional feasibility of low-priced materials produced in waste of forest instead of wheat flour which is extended for plywood adhesives. Wheat, pine bark, wood flour and pine foliage of coniferous trees or poplar foliage of hardwood species were selected and pulverized into 60-100 mesh minute powder after they were dried at $100-105^{\circ}C$ during 24 hours in the drying oven. The prepared particles as above were added to urea formaldehyde resin, urea-melamine copolymer resin and water soluble phenol formaldehyde resin in the ratio of 10, 20, 30 and 50%. After plywoods were processed by the above extending ratios, shear strength of extended plywoods were analyzed and discussed. The results obtained at this study were summarised as follows; 1. In the case of urea formaldehyde resin, both dry and wet shear strength of plywoods extended by wheat flour were shown the highest value. 2. Dry shear strength of urea-melamine copolymer resin was better than that of urea formaldehyde resin on the whole, while plywoods extended by wheat flour were shown excellent results. 3. Among 10% and 20% extensions of urea-melamine copolymer resin, the best results were shown by poplar leaves powder, wheat powder and wood flour. They had no significant difference statistically. 4. In the case of water soluble phenol formaldehyde resin, although dry shear strength of pine leaves powder was higher than that of wheat flour in the ratio of 10%, there was no significant difference between them in the ratio of 10 and 20%. 5. Among 20, 30 and 50% extensions of water soluble phenol formaldehyde resin, wet shear strength of wood flour and bark powder was higher than that of wheat flour. Wet shear strength of wood flour in the ratio of 10% was shown the same tendency as above.
Recently, carbon capture and storage (CCS) techniques have been globally studied. This study was conducted to use waste cement powder as an efficient raw material of mineral carbonation for $CO_2$ sequestration. Direct aqueous carbonation experiment was conducted with injecting pure $CO_2$ gas (99.9%) to a reactor containing $200m{\ell}$ reacting solution and the pulverized cement paste (W:C = 6:4) having particle size less than 0.15 mm. The effects of two additives (NaCl, $MgCl_2$) in carbonation were analyzed. The characteristics of carbonate minerals and carbonation process according to the type of additives and pH change were carefully evaluated. pH of reacting solution was gradually decreased with injecting $CO_2$ gas. $Ca^{2+}$ ion concentration in $MgCl_2$ containing solution was continuously decreased. In none $MgCl_2$ solution, however, $Ca^{2+}$ ion concentration was increased again as pH decreased. This is probably due to the dissolution of newly formed carbonate mineral in low pH solution. XRD analysis indicates that calcite is dominant carbonate mineral in none $MgCl_2$ solution whereas aragonite is dominant in $MgCl_2$ containing solution. Unstable vaterite formed in early stage of experiment was transformed to well crystallized calcite with decreasing pH in the absence of $MgCl_2$ additives. In the presence of $MgCl_2$ additives, the content of aragonite was increased with decreasing pH whereas the content of calite was decreased.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.25
no.6
/
pp.263-271
/
2015
Commercial AR(Alkali Resistant)-glass fiber has a good chemical resistant property, but also has a problem of difficulty in fiberizing process because of high viscosity in melted glass compare with E-glass fiber which is the most widely used for reinforced fiber of composite materials. In this study, we fabricated AR-glass fiber with low zirconia contents compare with commercial AR-glass fiber relatively, and measured properties against E-glass fiber. We obtained transparent clear glass with zirconia contents of 0.5~16 wt% by melting at $1600^{\circ}C$ for 2 hours. These AR-glass samples had high visible transmittance of 89~90 %, softening temperature of $703{\sim}887^{\circ}C$. And softening temperatures of them were increased according to the increasing zirconia contents. Compare with E-glass, AR-glass contains 4 wt% zirconia has different value of $-94^{\circ}C$ in softening temperature, $+68^{\circ}C$ at Log3 temperature and $-13^{\circ}C$ at Log5 temperature in viscosity. We could verify good alkali resistant property of the AR-glass fiber with SEM after dipping in alkali solution for 48~72 hours, and also high tensile strength, 1.7 times compare with E-glass fiber at 48 hours and 2.2 times at 72 hours. We conclude that this AR-glass fiber can be widely used as general alkali resistant glass fiber because of easy manufacturing condition and good properties even though it has low zirconia contents.
Kim, Young-Seok;Kim, Su-Jung;Kang, Seung-Goo;Lee, Young-Jun
The korean journal of orthodontics
/
v.37
no.6
/
pp.421-431
/
2007
The objective of this study was to provide guidelines for the diagnosis and successful treatment of orthodontic treatment with upper premolar extraction only Methods: The sample group consisted of 40 patients (20 with upper premolar extraction only, 20 with both upper and lower premolar extractions) who showed an overjet of more than 7 mm and were finished successfully. Lateral cephalographs were taken before and after orthodontic treatment. Landmarks showing the position of the upper and lower incisors and the position of the upper and lower lip were determined and angular measurement of these values were obtained for statistical analysis (Mann-Whitney test). Results: At pre-treatment, the position of the lower incisor was less labially inclined and the convexity of the lower lip was smaller in the upper premolar extraction only group than in the upper/lower premolar extraction group. At post-treatment, there was no difference in all measurements except for the position of the lower incisor. A comparison of changes between pre- and post-treatment showed that the retraction of upper & lower incisors and the decrease in convexity of the lower lip were greater in the upper/lower premolar extraction group. Conclusions: Treatment by upper premolar extraction can be of benefit for patients whose lower incisor proclination and lower lip protrusion are not excessive.
Journal of the Korean Society of Food Science and Nutrition
/
v.33
no.7
/
pp.1212-1217
/
2004
The aim of this study was to investigate Quality characteristics of Pleurospermum kamtschaticum to increase the value of functional food resources. To examine Quality characteristics of Pleurospermum kamtschaticum, various factors such as color, texture, fiber, minerals, tannin, crude proteins, crude lipids and sensory quality, were determined using physicochemical methods. The contents of dietary fiber were 0.57% and 0.54% in each 100 g of leaf and stem parts (freeze drying base). In mineral content, potassium was the highest value in both of leaf and stem parts (freeze drying base). The contents of tannin were 108.1 $\mu$g/mL and 20.9 $\mu$g/mL in leaf and stem parts (fresh base) respectively. Blanching stems showed significant difference in hardness from freeze-drying leaves. The antioxidative activity in ethanol extracts of Pleurospermum kamtschaticum was investigated using peroxide value and free radical scavenging activity. Free radical scavenging activity in ethanol extracts of Pleurospermum kamtschaticum was 43.5% in a 100 $\mu$g/mL level, and the antioxidative index was 1.09 in a 500 $\mu$g/mL level. For functional food using Pleurospermum kamtschaticum the contents of crude proteins and lipids were about 9% and 26%, respectively. The results from sensory evaluation of each treatment older age showed a better acceptability.
The Journal of the Korean bone and joint tumor society
/
v.10
no.1
/
pp.1-12
/
2004
Purpose: The current study was performed to analyze the oncological and functional results, and the patient, the limb and the prosthesis survival of osteosarcoma around the knee in children according to the treatment options. Materials and Methods: From 1982 to 2002, 63 patients with osteosarcoma around the knee underwent surgical treatments before 16 years of age. Surgical treatment options were amputation, endoprosthetic replacement, and implantation of low heat-treated autogenous bone graft after wide resection of tumor. The mean age of patients was 11.5 years (4.4~16), and the mean follow-up period was 6.1 years (2.1~16.8). All patients had neoadjuvant and adjuvant chemotherapy. All endoprosthses were extendible types. Anatomical locations of osteosarcoma were distal femur in 40 patients, and proximal tibia in 23 patients. As regard to Enneking stage, 4 patients had stage $II_A$, 50 patients had stage $II_B$, and 9 patients had stage III tumors. Results: The 5 year survival rate of stage $II_B$ patients was 72.7% in amputation, 83.7% in endoprosthesis, and 100% in low heat-treated autogenous bone graft. The 5 year survival rate of salvaged limb was 84.4% in endoprosthesis, and 80% in low heat-treated autogenous bone graft. The survival rate of prosthesis was 92.7% at 5 years, 67.4% at 10 years in endoprosthesis, and 75% at 5 years in low heat-treated autogenous bone graft. Mean functional outcome scores were 8.7 points in amputation, 20.6 points in endoprosthesis, and 16 points in low heat-treated autogenous bone graft. Distant metastasis occurred 15.8% in amputation, 27% in endoprosthesis and local recurrence occurred 8.1% in endoprosthesis, 14.3% in low heat-treated autogenous bone graft. Major complications happened 26.3% in amputation, 35.1% in endoprosthesis, and 28.6% in low heat-treated autogenous bone graft. Conclusion: Limb salvage procedure had functionally better results than amputation in children with osteosarcoma around the knee. Reconstruction with endoprosthesis after resection of tumor had good results in children as adults. In certain circumstances as too small bone for endoprosthesis or minimal bony destruction or too skeletally immature patient, low heat-treated autogenous bone graft may be a good treatment option. Low heat-treated autogenous bone graft may be considered as not only a substitute for endoprosthesis but also a temporary method before endoprosthesis.
Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.7
/
pp.504-509
/
2018
The purpose of this study was to manufacture a high-performance titanium yellow pigment. Anatase type $TiO_2$ was the skeleton of the pigment and $Sb_2O_3$ is used as the color assistant for the coloring agent, $Cr_2O_3$. Mixed raw materials for the pigment were $TiO_2$(98%), $Sb_2O_3$(99.5%), and $Cr_2O_3$(99.5%). The raw materials were mixed by a dry process and crystallized by calcination at $1,000{\sim}1,200^{\circ}C$. The crystalline material was pulverized in a Jar Mill under $1{\mu}m$ by a wet process and dried for 12 hours at $100^{\circ}C$. The pigment was finally made by a fine grinding process. To determine the best temperature for calcination, 4 temperature sections ($1000^{\circ}C$, $1100^{\circ}C$, $1150^{\circ}C$, and $1200^{\circ}C$) were set up. The X-ray diffraction peak of the rutile crystalline structure was highest at $1,150^{\circ}C$. The yellow ceramic pigment, which has the rutile structure, was applied for coating materials. The synthesized pigments underwent a discoloration tests on the acid resistance, alkaline resistance, weather resistance and heat resistance. In addition, a detection test on harmful heavy metals ($Cr^{+6}$) was done. The resulting values (${\Delta}E$) of the weather resistance test (2000hr), acid resistance test, alkaline resistance test, and heat resistance test were 0.74, 0.16, 0.07 and 0.29. The resulting value for heavy metals testing was 34ppm.
O, Jong-Hyeon;Park, Se-Hee;Shin, Hye-Jin;Cho, Kyung-Mo;Kim, Jin-Woo
Restorative Dentistry and Endodontics
/
v.33
no.2
/
pp.133-140
/
2008
The purpose of this study was to compare the apical micro leakage in root canal filled with Resilon by several self-etching primers and methacrylate-based root canal sealer. Seventy single-rooted human teeth were used in this study. The canals were instrumented by a crown-down manner with Gate-Glidden drills and .04 Taper Profile to ISO #40. The teeth were randomly divided into four experimental groups of 15 teeth each according to root canal filling material and self-etching primers and two control groups (positive and negative) of 5 teeth each as follows: group 1 - gutta percha and $AH26^{(R)}$ sealer: group 2 - Resilon, $RealSeal^{TM}$ primer and $RealSeal^{TM}$ sealer: group 3-Resilon, Clearfil SE $Bond^{(R)}$ primer and $RealSeal^{TM}$ sealer group 4-Resilon, $AdheSe^{(R)}$ primer and $RealSeal^{TM}$ sealer. Apical leakage was measured by a maximum length of linear dye penetration of roots sectioned longitudinally by diamond disk. Statistical analysis was performed using the One-way ANOVA followed by Scheffe's test. There were no statistical differences in the mean apical dye penetration among the groups 2, 3 and 4 of self-etching primers. And group 1, 2 and 3 had also no statistical difference in apical dye penetration. But, there was statistical difference between group 1 and 4 (p < 0.05). The group 1 showed the least dye penetration. According to the results of this study, Resilon with self-etching primer was not sealed root canal better than gutta precha with $AH26^{(R)}$ at sealing root canals. And there was no significant difference in apical leakage among the three self-etching primers.
Leaflets of Allium sativum L. (garlic) and leaf scales Allium cepa L. (onion) were cultured on the Murashige and Skoog(MS) medium to study the effects of plant growth regulators, temperature and light on the formation of shoot and root. And also, the potentiality of shoot or root formation of tissues in accordance with the leaf age and the region was discussed. In the experiment with garlic, the formation of shoot and root was more effective on the medium containing $BA\;2mg/{\ell}$ and $NAA\;1mg/{\ell}$ and it occured on the basal region of outer leaflets. The shoot formation was more effective at $20^{\circ}C$ than $28^{\circ}C$ under 16-hour daylength, and it was more effective in darkness than light condition at $28^{\circ}C$. The results of shoot and root formation on the new cloves of garlic harvested in 1982 were similar to those the old cloves of garlic harvested in 1981. In the experiment with leaf seales of onion, when the tissues of dormant leaf scales of onions harvested in 1981 were explanted on the MS medium, a few shoots were formed on the medium containing $BA\;2mg/{\ell}$ and $NAA\;1mg/{\ell}$. In this case,there were no differences on the shoot formation among the age and region of leaflets. On the culture of leaf scales, the shoot was not formed on the leaf scales located at outer or middle region, but it was formed on the medium containing BA accompanied with NAA at inner scales. On the medium complemented with BA alone, the tissues were not differentiated, but on the medium complemented with NAA, the callus was formed from tissues and then the root was formed through the callus.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.