• Journal of Animal Environmental Science
• /
• v.18 no.1
• /
• pp.45-56
• /
• 2012

This study was conducted to give basic information of the animal manure management by manure units determination for recycling farming in Cheorwon-gun. Manure units (MU) are used in the permitting, registration, and the environmental process because they allow equal standards for all animals based on manure nutrient production. An MU is calculated by multiplying the number of animals by manure unit factor for the specific type of animal. The manure unit factor for MU determination was determined by dividing amounts of manure N produced 80 kg N/year. Conversion to manure units is a procedure used to determine nutrient pollution equivalents among the different animal types. In this study, the manure unit factor based on nitrogen in Hanwoo, dairy cow, pig were 0.36, 0.8 0.105, respectively. The analysis of manure unit per ha shows that the N loading by MU is quite different by region. The nitrogen loading of manure unit (MU) per ha of cultivated land was the highest in the Galmal-eup on province with 2.4 MU/ha, which is higher than the appropriate level. The Seo-myeon province came next with 1.92 MU/ha. To be utilized as a valid program to build the recycling farming system, diverse measures shall be mapped out to properly determine manure units, evaluate N-loading and to properly manage their nutrient balance of each region.

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.317-323
• /
• 1994

Nine plant foods (persimmon leaf, perilla seed, Chinese quince, ginger root, walnut, mugwort leaf, arrowroot, buckwheat and sorghum) rich in phenolic substances were examined for their effects on the digestive enzymes, food-poisoning bacteria and mutagenicity/antimutagenicity by Ames test. Among tested samples, Chinese quince significantly inhibited the $\alpha-amylase$ activity (97%), exhibiting an uncompetitive inhibition type. Protease activity was inhibited by Chinese quince (86%), persimmon leaf (51%) and mugwort leaf (20%), in which mugwort extract exhibited a noncompetitive type. Lipase was activated >50% by all samples. The inhibition of $\alpha-amylase$ was highly correlated with the content of condensed tannin (r=0.89) and the inhibition of protease, with total phenolic content (r=0.84). Total phenolies fraction of tested samples showed the growth inhibition toward E. coli. Streptococcus faecalis and Salmonella enteritidis, in which the effect of perilla, sorghum and arrowroot was the highest for E. coli. Standard phenolics and food samples did not show any mutagenicity toward Salmonella typhimurium TA98 and TA100. Tannic acid inhibited the mutation of the two strains by benzo[a]pyrene whereas total phenolics fractions of Chinese quince and walnut exhibited antimutagenicity to a lesser extent.

• Korean journal of food and cookery science
• /
• v.28 no.2
• /
• pp.207-214
• /
• 2012

In this study, cabbage ($Brassica$ $oleracea$ var. $capitata$) Kimchi was made packed into four kinds of packaging materials, PET vessel, PP tray, OPP/AL/PE film and Nylon/PE/LLDP film, and the effects of these packaging materials on Kimchi quality characteristics, such as lactic acid bacteria counts, salinity, sugar contents, pH, total acidity, electron donating ability were examine as well as their effects on the sensory qualities after storage at a temperature of $4^{\circ}C$. The pH change ranged from pH 6.24 to 6.43 shortly after manufacture, and did not significantly change until 7 days of storage. However, it began to decrease rapidly after 14 days. On the 35th day of storage, the acidity was 0.79% in the PET vessel and 0.83% in OPP/AL/PE. Therefore, the PET vessel and OPP/AL/PE were considered appropriate packaging materials for Kimchi storage. The salinity did not change significantly during the storage period, and the sugar content generally increased in the four kinds of packaging materials, but decreasing after the 7th day of storage. After 14 days of storage, the Kimchi stored in the OPP/AL/PE film showed the highest lactic acid bacteria counts. Although the electron donating ability was the highest after proper time for fermentation, it decreased in all the packaging materials after the proper time for fermentation. However, the OPP/AL/PE film had an antioxidant potential of up to 93.18%. In the sensory evaluation, fermented Kimchi was found to be superior unfermented Kimchi. In addition, the Kimchi stored in the OPP/AL/PE film for 14 days showed the high score of 6.70 and 6.60 in overall preference. Therefore, the results of this study provide basic knowledge on the fermentation level and packaging material's condition for commercialization of small packed cabbage Kimchi. Henceforth, industrialization must include a variety of studies under these conditions to increase the merchantability.

• Journal of Embryo Transfer
• /
• v.20 no.3
• /
• pp.271-277
• /
• 2005

This study was undertaken to determine the normal appearance of the postpartum uterine involution. Postpartum changes in uterine shape, architecture, echogenicity and diameter were monitored with ultrasonography in 8 Cocker spaniel bitches. The excretory period of vaginal discharges in 8 normal bitches of uterine involution was finished completely at 23.20$\pm$2.77 days (Mean$\pm$SD) postpartum. The short axis shape of the uterus was varied from polygonal to circular. This lasted until 1600$\pm$2.12 days Postpartum, during which time the short axis uterine shape gradually changed to circular. Also, the long axis shape of the uterus was created a beaded appearance of the horns until 25.60$\pm$2.51 days postpartum. The uterine diameter was decreased not only in the placental sites from 24.20$\pm$2.06mm at 1 day to 13.18$\pm$0.84mm at 7 days postpartum, but also in the interplacental sites 14.26$\pm$2.22mm at 1 day, 9.81$\pm$0.7mm at 7 days postpartum. There was a general trend of decreasing uterine diameter, which occurred more rapidly at the placental sites. In conclusion, normal postpartum uterine involution in Cocker spainel bitches appeared to be completed around 68 days postpartum by gross findings such as vaginal discharges, and by ultrasongraphic findings, uterine shape and echogenicity.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.215-231
• /
• 2020

Forest landscape models (FLMs) can be used to investigate the complex interactions of various ecological processes and patterns, which makes them useful tools to evaluate how environmental and anthropogenic variables can influence forest ecosystems. However, due to the large spatio-temporal scales in FLMs studies, parameterization and validation can be extremely challenging when applying to new study areas. To address this issue, we focused on the parameterization and application of a spatially explicit forest landscape model, LANDIS-II, to Mt. Gyebang, South Korea, with the use of the National Forest Inventory (NFI) and long-term ecological research (LTER) site data. In this study, we present the followings for the biomass succession extension of LANDIS-II: 1) species-specific and spatial parameters estimation for the biomass succession extension of LANDIS-II, 2) calibration, and 3) application and validation for Mt. Gyebang. For the biomass succession extension, we selected 14 tree species, and parameterized ecoregion map, initial community map, species growth characteristics. We produced ecoregion map using elevation, aspect, and topographic wetness index based on digital elevation model. Initial community map was produced based on NFI and sub-alpine survey data. Tree species growth parameters, such as aboveground net primary production and maximum aboveground biomass, were estimated from PnET-II model based on species physiological factors and environmental variables. Literature data were used to estimate species physiological factors, such as FolN, SLWmax, HalfSat, growing temperature, and shade tolerance. For calibration and validation purposes, we compared species-specific aboveground biomass of model outputs and NFI and sub-alpine survey data and calculated coefficient of determination (R²) and root mean square error (RMSE). The final model performed very well, with 0. 98 R² and 8. 9 RMSE. This study can serve as a foundation for the use of FLMs to other applications such as comparing alternative forest management scenarios and natural disturbance effects.

• The Journal of Korean Medicine
• /
• v.16 no.2 s.30
• /
• pp.177-194
• /
• 1995

The following conclusions were obtained after bibliographic investigation on the therapy of lung cancer by western, oriental, and integrated oriental and western medicine. 1. Lung cancer is classified into small cell lung cancer(SCLC) or non small cell lung cancer(NSCLC) in the treatment by western medicine, and applied with the means of surgery, radiotherapy and chemotherapy alone or combined, depending on the stage and the symptom. 2. Treatment by oriental medicine includes the means of strengthening body resistance to dispel pathogenic factors(扶正祛邪), combined approach of reinforcement and expulsion(攻補兼施), and reinforcing both qi and blood(氣血雙補), depending on the initial, middle, and terminal stage. And also treatment based on differentiation of symptom(辨證施治) is applied according to the type of symptom; deficiency of qi of both lung and spleen(肺脾氣虛), heat symptom of lung by deficiency of yin(肺熱陰虛), stagnation of damp-phlegm and blood(濕痰瘀阻), stagnation of qi and blood(氣血瘀滯), deficiency of both qi and yin(氣陰兩虛). Single or combined herb drug is used according to the symptom. 3. Treatment by integrated oriental and western medicine improved survival rate and quality of life. It promoted recovery and improved survival rate in the patients receiving surgery. Integrated radiotherapy and oriental medicine treatment reduced adverse effect by radiotherapy and improved therapeutic effect and survival rate. Integrated chemotherapy with oriental medicine treatment reduced side effect by chemotherapy and improved quality of life and survival rate. These results suggest that therapy of lung cancer should be applied with integrated oriental and western medicine from diagnosis to treatment for promoting therapeutic effect. And further study on this therapy should be ensued.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.321-331
• /
• 2005

The purpose of this study was to compare the effectiveness of mechanical and acid treatment on enamel surfaces for the retention of pit and fissure sealants and evaluate the presence of a prismless layer. The etch pattern produced on enamel from immature and mature premolar teeth extracted with varying period of acid etching using 37% phosphoric acid was examined using a scanning electron microscope(SEM). The composition of each groups was evaluated using an energy dispersive x-ray(EDX) spectroscopy. The result of present study can be summarized as follows: 1. Prismless layer was commonly observed on the fissure enamel in young and mature premolar. 2. There were no differences in micro-structure and etching pattern on fissure enamel between the young and the mature premolar. 3. The most effective etching pattern for retention of pit and fissure sealant was observed in 60 seconds of etching time and no apparent difference of etching pattern was found among 15, 30, and 45 seconds of etching time which showed non-retentive etching patterns. 4. The etching pattern obtained by grinding enamel surface with bur followed by 60 seconds of etching was similar to that of 60 seconds of etching without any pretreatment of fissure surface. 5. Type 2 etching pattern was commonly found on fissure enamel in both young and mature premolar. 6. The calcium content and P/Ca ratio in fissure enamel between the young and the mature premolar were significantly different(P<0.05). But content of calcium, phosphate and P/Ca ratio on various regions of fissure enamel in both young and mature premolar did not showed any difference. Based on these results, prismless layer may negatively influence the retention of pit and fissure sealants. Therefore, the mechanical removal of the prismless layer by grinding prior to etching or by prolonged etching time of enamel within the fissure system should result in an improved bonding of a pit and fissure sealant.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.1
• /
• pp.19-30
• /
• 2010

The Jurassic Daebo Ogcheon granite is distributed in the Ogcheon area which is located in the central part of the Ogcheon Belt, Korea. This paper newly examines the timing of Honam shearing on the basis of the petrofabric researches on the deformation structures of the Ogcheon granite. The structural shape of Ogcheon granite is mainly characterized by a wedge shaped of E-W trend and an elongate shape of ENE trend in geological map and by contacts parallel to the regional S1 foliation in the host Ogcheon supergroup. It indicates that the pluton was permittedly emplaced after the S1 formation. The main deformation structures are marked by a solid-state tectonic foliation of N-S trend, which passes through the contact of the pluton, and by an aplitic dyke of E-W trend, and by sinistral, NW and E-W oriented shear zones on the eastern border of the pluton. The petrofabric study on the main deformation structures suggests that the tectonic foliation and the aplitic dyke were formed by the Honam dextral strike-slip shearing of (N)NE trend at ca. $500{\sim}450^{\circ}C$ deformation temperature, and that the sinistral shear zones could be induced by the dextral rotation of the pluton from its original site of intrusion, that is, by the shear strain which is due to sliding of the pluton past the host rocks. The history of emplacement and deformation of the Ogcheon granite and the previous results on the timing of Honam shearing would be newly established and reviewed as follows. (1) Early~Middle Jurassic(187~170 Ma); intrusion of syntectonic foliated granite related to Early Honam shearing, (2) Middle Jurassic(175~166 Ma); main magmatic period of Jurassic granitoids, the permitted emplacement of the Ogcheon granite, (3) Middle~Late Jurassic(168~152 Ma); main cooling period of Jurassic granitoids, the deformation of the Ogcheon granite related to Late Honam shearing. Thus, this study proposes that the Honam shear movement would occur two times at least during 187~152 Ma (ca. 35 Ma) through the intertectonic phase of 175~166 Ma.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.908-914
• /
• 2017

Cold plasma (CP) was applied to examine microbial safety and physicochemical properties of rough rice. CP was generated in a square-shaped plastic container (250 W, 15 kHz, ambient air) and dielectric barrier discharge plasma treatment was applied for periods of 0, 10, and 20 min during 2 weeks at 4 and $25^{\circ}C$. As a result of observing changes in growth of microorganisms, 3.46-3.86 log CFU/g of total aerobic bacteria and 2.27-2.86 log CFU/g of mold were detected in the early stage of storage. The growth of total aerobic bacteria and mold was increased depending on the storage temperature and period, but there was no big difference between cultivars. Microbial analysis after storage showed that microorganisms of plasma-treated group were less grown approximately 1.50 log CFU/g. Moisture content of rough rice was decreased by storage temperature and periods. As for the amylose content, changes in the content by plasma were not observed in Samkwang, Cheongpum and Misomi, whereas Palbangmi showed a tendency to increase. The results of this study indicated that CP treatment improved the microbial quality of rough rice, but further studies should be conducted to reduce the deterioration of sensory quality induced by CP.

• Weed & Turfgrass Science
• /
• v.4 no.4
• /
• pp.330-337
• /
• 2015

Research was conducted to investigate germination and establishment characteristics of five fescue species. Alternative conditions of 8-hr light at $25^{\circ}C$ and 16-hr dark at $15^{\circ}C$ were applied. Significant differences were observed in seed germination power, germination speed and germination peak time. Germination power was 62.25% in CRF 'Audubon' to 96.75% in TF 'Olympic Gold'. It was greater with TF over FF, being TF > HF > SF > CF > CRF. Germination speed, measured as days to seed germination of 50% through 80%, was fastest with TF, medium with CF and HF, and slowest with CRF and SF, being TF > CF, HF > CRF, SF. Germination peak time was much faster with TF over FF. It ranged from 0.94 to 1.47 days with TF. But it varied with 2.80 to 12.36 days among FF species. The peak time was longer in order of HF, SF < CF < CRF. Considering germination power, germination speed and germination peak time, TF 'Arid III' was the best cultivar under alternative conditions, while CRF 'Audubon' the poorest. Overall establishment characteristics among Festuca species were even better with TF over FF in order of TF > CF, HF > SF > CRF.