• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.590-597
• /
• 2007

The portion of thin plate is expected to increases as to the development of design and fabrication technology. The weld-induced deformation is more serious in thin plates than in thick plates because heat affect zone of thin plates is wider than that of thick plates, and in addition internal and external constraints much more influence upon weld-induced deformation of thin plates. This paper is aimed at applying the mechanical tensioning method to fillet weld of thin plates to reduce the weld-induced deformation. For this purpose, fillet welding tests have been carried out for several thin plate specimens with varying plate thickness and magnitude of tensile load. From the present study, it has been found that the tensioning method is effective on reduction of weld-induced deformation.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.5
• /
• pp.504-508
• /
• 2007

In the case of thin plate blocks, buckling deformation due to longitudinal shrinkage is the most important weld-induced deformation. This paper is concerned with developing the formula to predict the longitudinal shrinkage due to welding, in which mechanical tension effect in welding direction is accounted for. For this purpose, bead on plate welding test has been carried out for the 27 thin plate specimens with varying welding conditions and magnitude of tensile load. Empirical formula of predicting the longitudinal shrinkage has been derived based on the results of welding test, in which effect of mechanical tension is included. The derived formula can be usefully used in predicting the level of tensile load to reduce the longitudinal shrinkage.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.28-28
• /
• 2011

최근 초경량 직물에 나일론 Spiral Crimp 신축소재에 많이 사용되어지는 Mechanical 신축성 직물이 시판되고 있으나 신축특성의 저하, 품질 저하의 문제점이 대두되고 있어 아직까지 본격적으로는 상용화되지 못하고 있고 국내외적으로 아직까지 나일론 세섬사 Spiral Crimp 신축소재개발과 관련된 기술개발은 전무한 실정이다. 따라서 본 연구에서는 현재까지 국내외적으로 개발되지 못한 스포츠 아웃도어용 경량직물의 Mechanical 신축성 초경량 직물을 개발하기 위해서 중합단계에서 나일론 개질 폴리머를 개발하고, 수축 특성이 서로 다른 2종의 나일론 폴리머를 이용하여 side by side 형태로 세섬 복합방사와 사가공 및 연신 단계에서 2d급 Spiral Crimp 및 Super Bulky특성이 우수한 신축성 소재를 개발하여 이들의 구조와 물성을 조사 검토하여 이를 실제 현장에 자료를 제공하는 것을 목적으로 하였다.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.341-351
• /
• 2008

This study investigated the effect of intermittent polymerization on the rate of polymerization shrinkage and cuspal deflection in composite resins. The linear polymerization shrinkage of each composite was measured using the custom-made linometer along with the light shutter specially devised to block the light at the previously determined interval. Samples were divided into 4 groups by light curing method; Group 1) continuous light (60s with light on); Group 2) intermittent light (cycles of 3s with 2s light on & 1s with light off for 90s): Group 3) intermittent light (cycles of 2s with 1s light on & 1s with light off for 120s); Group 4) intermittent light (cycles of 3s with 1s light on & 2s with light off for 180s). The amount of linear polymerization shrinkage was measured and its maximum rate (Rmax) and peak time (PT) in the first 15 seconds were calculated. For the measurement of cuspal deflection of teeth, MOD cavities were prepared in 10 extracted maxillary premolars. Reduction in the intercuspal distance was measured by the custom-made cuspal deflection measuring machine. ANOVA analysis was used for the comparison of the light curing groups and t-test was used to determine significant difference between the composite resins. Pyramid showed the greater amount of polymerization shrinkage than Heliomolar (p < 0.05). There was no significant difference in the linear polymerization shrinkage among the groups. The Rmax was group 4 < 3, 2 < 1 in Heliomolar and group 3 < 4 < 2, 1 in Pyramid (p < 0.05). Pyramid demonstrated greater cuspal deflection than Heliomolar. The cuspal deflection in Heliomolar was group 4 < 3 < 2, 1 and group 4, 3 < 2, 1 in Pyramid (p < 0.05). It was concluded that the reduced rate of polymerization shrinkage by intermittent polymerization can help to decrease the cuspal deflection.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.5
• /
• pp.496-503
• /
• 2007

Although weld-induced deformation is inevitable in shipbuilding, it is important to reduce it as low as possible during fabrication for a more efficient production of ships' blocks. The weld-induced deformation is more serious in thin plates than in thick plates because heat affect zone of thin plates is wider than that of thick plates, and in addition internal and external constraints much more influence upon weld-induced deformation of thin plates. This paper deals with the application of the mechanical tensioning method to butt weld of thin plates to reduce the transverse and longitudinal deformation. in order to investigate the quantitative effect of tensioning method upon the reduction of angular deformation and shrinkage in longitudinal and transverse direction of weld line, butt welding test have been carried out for several thin plate specimens with varying plate thickness and magnitude of tensile load. Numerical simulation has been also carried out to compare the weld-induced deformation and residual stress. From the present study, it has been found that the tensioning method is very effective on reduction of weld-induced residual stress as well as weld-induced deformation.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.3 s.70
• /
• pp.103-108
• /
• 2006

It has been well appreciated that reducing weld-induced deformation as law as possible is important during fabrication for a more efficient production of blocks. The weld-induced deformation is more serious in thin plates than in thick plates because heat affect zone of thin plates is wider than that of thick plates and in addition internal and external constraints much more influence upon weld-induced deformation of thin plates. This paper deals with the application of the mechanical tensioning method to butt weld of thin plates to reduce the weld-induced deformation. In order to investigate the quantitative effect of tensioning method upon the reduction of angular deformation and shrinkage in longitudinal and transverse direction of weld line, butt welding test have been carried out for several thin plate specimens with varying plate thickness and magnitude of tensile load. From the present experimental study, it has been found that the tensioning method is very effective on reduction of weld-induced residual stress as well as weld-induced deformation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.7
• /
• pp.317-330
• /
• 2001

대규모 가상환경의 핵심은 사용자 PC의 성능에 영향을 받는 확장성에 있다. 기존의 접근 방식은 대규모 환경을 지원하기 위해 멀티캐스트를 주로 사용하였다. 그러나 멀티캐스트는 현재 멀티캐스트 하드웨어가 지원할 수 있는 그룹의 수가 제한된다는 문제점이 있다. 본 논문에서는 PC 클라이언트와 인터넷과 같은 대규모 네트워크 기반의 확장성 높은 가상환경 모델을 제시한다. 멀티캐스트 네트워크와 PC 클라이언트 사이에 위치하는 관심영역 관리자(AOIM)는 멀티캐스트 그룹과 함께 다중 필터링을 수행하여 정보의 흐름을 최적화한다. 또한, 관심영역 관리자는 사용자의 관심 패턴에 따라 관심영역(AOI)으로부터 PC 클라이언트로의 데이터 전송량을 조절한다. 관심영역은 정보의 정확도에 따라 세 단계로 구분되며, 각 단계의 구분은 네트워크 현황에 따라 적응적으로 수축 또는 확장될 수 있어 PC 클라이언트는 최적화된 가상환경 상태정보를 제공받는다. 결론적으로, 제안된 모델은 다양한 컴퓨팅 환경의 PC 클라이언트에게 정확한 최우선 관심영역 정보를 제공한다.

• Journal of Yeungnam Medical Science
• /
• v.16 no.2
• /
• pp.309-317
• /
• 1999

Background: Left ventricular diastolic filling is an important determinant for maintenance of cardiac output during hemodialysis. Few investigators have studied the influence of hemodialysis on diastolic function. To evaluate the change of left ventricular systolic and diastolic function. we performed M-mode and Doppler echocardiographic studies before and after hemodialysis. Methods: The study population consisted of 30 patients(15 patients were male, mean age $45{\pm}10$ years) with CRF on maintenance hemodialysis. They have normal left ventricular systolic function(Fractional shortening>30%) and no evidence of valvular heart disease or regional wall motion abnormalities. The ejection fraction (EF) was measured using M-mode echocardiography and Doppler indices such as peak E velocity, peak A velocity, isovolumetric relaxation time(IVRT), deceleration time(DT). and left ventricular ejection time(LVET) obtained from Doppler echocardiography. The index of myocardial performance (IMP) was calculated from each of the Doppler velocity indices. Results: The weight reduction after hemodialysis was $2.1{\pm}1.0kg$(p<0.0001), After hemodialysis, there was some decrease in blood pressure(p<0.05), but no significant change in heart rate, EF and fractional shortening, mean VCF, peak A velocity, and DT. And significant reduction in peak E velocity, E/A ratio(p<0.0001. p<0.001), and significant increase in IVRT and IMP(p<0.05, p<0.0001) were noted. Conclusion: In conclusion, preload reduction is the main mechanism that accounts for changes in Doppler diastolic indices after hemodialysis. And an increased IMP suggests that diastolic function may be aggravated after hemodialysis, and that implies impaired left ventricular filling and disturbed left ventricular compliance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.5
• /
• pp.425-431
• /
• 2006

In order to investigate the effects of ethylene on the seed development of three corn types (dent, sweet, and super sweet corns), aminoethoxyvinyl glycine (AVG) and silver thiosulfate (STS) and ethephon (2-chloroethylphosphonic acid, CEPA) were applied either on whole plants or shanks of ears at 9 and 21 days after silking. Ethylene production of developing super sweet corn seeds was much higher than those of sweet and dent corns. The cavity in the endosperm tissues of the super sweet corn started earlier and endosperm was collapsed more severely compared to those of sweet and dent corns. Ethylene production seemed to be related to the death of endosperm cells to form a cavity. Application of AVG and STS reduced ethylene production and delayed cavity formation in endosperm of super sweet corn seeds, while CEPA increased ethylene production and enhanced the time of cavity formation. AVG and STS increased 100-seed weight, while CEPA decreased.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.579-587
• /
• 2010

To investigate the properties of PET films, PET films were extruded at various temperature above $T_m$ and quenched at $18^{\circ}C$ for amorphous sheet, and stretched along a direction defined as the machine direction (MD) with a transverse direction (TD) above $T_g$ at various stretching ratios and then annealed at various temperatures produced by SKC PET line. Thermal shrinkage of MD and TD increased with decreasing annealing temperature and extruding temperature, and increasing stretching ratio. The degree of crystallinity, density, heat of fusion (${\Delta}H$) and pre-melting point ($T_m'$) increased with increasing annealing temperature and extruding temperature. Number average molecular weight ($M_n$) and intrinsic viscosity decreased with increasing extruding temperature. Tensile strength and modulus increased with increasing stretching ratio, however decreased with increasing annealing temperature. Reflective index of both stretching and thickness direction increased with increasing stretching ratio and annealing temperature.