• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.23-24
• /
• 2017

본 논문은 무정전전원장치의 전압품질 향상을 위한 디지털 홀수고조파 반복제어기 설계기법에 대해 기술한다. 반복제어기의 설계를 위해 전체 제어시스템을 설계하고, 반복제어기가 안정하기 위한 기준을 제시한다. 비선형 부하에 대해 반복제어기를 적용함으로써, 인버터 출력전압의 홀수고조파 성분을 효과적으로 보상할 수 있으며, 이를 모의실험 및 실험으로 확인한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.653-662
• /
• 1999

In this paper, subharmonically injection locked oscillator(SILO) was designed and measured. SILO with series feedback was designed using Two Signal Method(TSM). The free-running oscillator frequency was 9.4 GHz with 6 dBm output power. In case of injection, the multiplied injected signal locked the free-running frequency. The locked signal output power was higher than any other spurious response at least 40 dB. The locking range was 220MHz (second subharmonic locking), 100 MHz(4th subharmonic locking), and phase noise was -111 dBc/Hz, -104 dBc/Hz at 100kHz offset, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.462-469
• /
• 2001

In this paper, local oscillator in K band using low frequency noise upconversion gain anaylsis was designed and measured. We extended Two Signal Method(TSM) to estimate upconversion gain and resulting phase noise. To confirm the validity of the proposed method, a free-running oscillator which had low upconversion gain was designed. The measured oscillation frequency was 23.42 GHz and phase noise at 1 MHz of offset was -105.2 dBc/Hz. Also, this oscillator was operated for subharmonic injection locked osci1lator(SILO). In this case, SILO showed ideal frequency multiplier phase noise characteristics at low subharmonic injection power level.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.461-469
• /
• 2017

A segment of the wave board has been expressed as a submerged line segment in the two dimensional wave flume. The lower end of the line segment could be extended to the bottom of the wave flume and the other opposite upper end of the board could be extended to the free surface. It is assumed that the motion of the wave board could be defined by the sinusoidal motion in horizontal direction on either end of the wave board. When the amplitude of sinusoidal motion of the wave board on lower and upper end are equal, the wave board motion could express the horizontally oscillating submerged segment of piston type wave generator. The submerged segment of flap type wave generator also could be expressed by taking the motion amplitude differently for the either end of the board. The pivot point of the segment motion could play a role of hinge point of the flap type wave generator. Simplified analytic solution of oscillating submerged wave board segment in water of finite depth has been derived through the first order perturbation method at two dimensional domain. The case study of the analytic solution has been carried out and it is found out that the solution could be utilized for the design of wave generator with arbitrary shape by linear superposition.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.4
• /
• pp.208-222
• /
• 1990

The nonlinear hydrodynamic pressure force and moment on hinged wavemakers of variable-draft are presented. A closed-form solution (correct to second-order) for the nonlinear wavemaker boundary value problem has been obtained by employing the Stokes perturbation expansion scheme. The physical significance of the second-order contributions to the hydrodynamic pressure moment are examined in detail. Design curves are presented which demonstrate both the magnitude of the second-order nonlinearities and the effects of the variable-draft hinge height. The second-order contributions to the total hydrodynamic force and moment consist of a time-dependent and a steady part. The sum of the first and second-order pressure force and moment show a significant increase over those predicted by linear wavemaker theory. The second-order effects are shown to vary with both relative water depth and wave amplitude. The second-order dynamic effects are relatively more important for hinged wavemakers with shallower drafts.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.16 no.1
• /
• pp.1-6
• /
• 1979

A method to determine the optimum drafts of waveboards of single and double-flap wavemaker is presented by using a linearized first-order wave theory and a linear regression method. A linear regression is verified to be quite simpler than the local disturbance consideration or regular-wave forming distance. It is pointed out that lower hinge should be deep enough to keep the upper flap vertical for a long wave length.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.1-9
• /
• 2001

Based on the linear potential theory with the side wall reflection. the directional spectrum waves are numerically simulated by a source distribution method and these together with long-crested irregular waves are also generated at the towing tank of Pusan National University by considering the transfer function of the wave maker obtained from the regular waves. In the numerical simulation, the characteristics of the directional spreading function are investigated by changing the breadth of the wave-maker unit. the width of the towing tank and the wave period. In the experimental generation, the statistical properties and the power spectrums of the long-crested irregular and directional waves are compared along the towing tank length. The directional spreading functions are also investigated at various positions in the tank.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.2
• /
• pp.112-120
• /
• 2021

The novel wave generating system of a wave flume has been devised by utilizing the analytic solution of wave board motion in idealized two dimensional space. The arbitrary oscillation motion of submerged wave board segment has been defined by sinusoidal motion of upper and lower end of the wave board. The analytic solution of the wave board motion has been represented by the solution of board motion due to flap motion and swing motion. Arbitrary oscillation of the board could be specified by determining amplitude, frequency, and the phase lag. A novel hybrid wave generator could be operated not only in piston motion but also in flap or swing motion by selection of control parameter. The wave generator has unique motion enhancing ability by appending flap motion or swing motion to piston motion in wave generation. In addition the hybrid wave generator has advantages in generating high quality wave spectrum of irregular wave in simulating real sea condition.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.150-155
• /
• 1991

연소기체의 진단연구에 응용하기 위한 코헤런트 라만분광기를 설계·제작하여 성능을 조사하였다. 광원으로는 단일 종모드로 발진하는 Nd:YAG 레이저의 이차고조파와 색소 레이저를 이용하였다. Collinear 방법으로 상온의 질소기체 압력을 변화시키면서 분광 신호를 측정하였으며, 제작된 분광기 성능에 대하여 논의하였다.

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.353-358
• /
• 2004

A transient irregular wave was designed based on ISSC spectrum The designed wave was generated in the towing tank and ,the roll motion of a model was measured A method to predict the maximum roll motion, expected in the short-term sea state, was investigated with comparison of the theoretical and experimental results.