• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.41-52
• /
• 2015

The number of military facilities has been rapidly increased due to growing requirement of modernization and military welfare. However, adequate maintenance has not implemented to these facilities. As a result, they are deteriorated quickly and require performance enhancement treatments. There are two ways of performance enhancement, reconstruction and remodeling. Despite the research result that remodeling within the standard remodeling range is more economical, remodeling of military facilities is not considered equivalent to reconstruction as an option of performance improvement. Therefore, derived from the relationship between performance change during life cycle of building and range of remodeling needs, this study tries to propose Remodeling Process Model(RPM) which uses a method to choose remodeling in a Specific Point of Time(SPT) when remodeling is considered more economical than reconstruction. In addition, this study suggests practical service life and functionality evaluation standard together which require to realize the RPM. This RPM make it possible to avoid the cases that facilities which do not have any problem on structural reliability but have low level of functionality miss appropriate remodeling timing and inevitably choose reconstruction as a performance improvement option. It also present the possibility of simple reconstruction / remodeling decision-making for facility managers who administrate building having various type, compilation and elapsed time. Consequently, this process model focusing on remodeling more may contribute to reduce resource waste caused by reconstruction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.253-259
• /
• 2018

In February 2014, the rudder upper stock and the nut of a passenger ship were released and an accident occurred. That accident occurred because the steering gear of passenger ships that was intended to move many passengers. The accidents due to steering gear was zero according to 2010-2016 statistics. There is no rules prevent loosening of the upper rudder nut in "Ship Safety Act" and "Structural standard of steel ship". Since the accident, the Korea register has been revised to the joining method in Part 5 Chapter 7 of the rules in the classification of steel ships. In the field survey of 12 passenger ships operating on Mokpo and surrounding islands, the welding method was applied in the cases as the fastening method. The fastening type was equipped with two C-type structures. It was structured to be difficult to access. The NAS 3350 test was conducted to investigate ways to prevent homologous accident considering the characteristic of passenger ships that need to lift or unload rides once a year.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.34-45
• /
• 2019

To drive construction project successful, a construction manager with good competency is needed. In order to select appropriate construction manager, there should be a standard and a method for appropriately evaluating the competency of construction manager. There have been many researches on the competency of construction managers, but there are two points to be supplemented. One is that construction manager's competency measurement was not concrete and objective, and the other is that construction project performance directly reflects individual manager's performance. The purpose of this study is to derive a construction manager competency evaluation index by using the Notational Analysis technique that is used when deriving an indicator that measures the athlete's competency in sports. This analysis was drawn with Delphi method. Finally, the 'measurable behaviors'were derived that can evaluate the competency of construction managers. Through this, it is possible to express each manager's expertise, leadership, and personal characteristics in numerical expression. This will help decision makers when selecting construction managers. It is anticipated that decision makers will be able to make the decision to select the necessary construction managers easier because it can evaluate the construction managers through a scientific approach based on the record by supplementing the existing method which only relied on intuition.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.438-438
• /
• 2021

우리나라의 수질오염총량관리제도는 수계 내 모든 유역을 관리대상으로 동일 기준유량 조건에 동일한 대상물질로 관리하고 있지만, 본류는 지류의 영향을 받고 있으며 지류는 사람이 거주하는 지역 인근에 있어 본류 수질에 직접적인 영향을 미치고 있다. 이는 지류의 시급한 개선이 필요한 오염물질의 실질적인 관리가 어려워 이를 개선하기 위해 오염도가 높은 지류의 총량관리를 위한 지류총량제도의 추가 도입이 필요한 실정이다. 본 연구에서는 지류총량제 시행에 따른 효과를 예측하기 위해 팔당수계 유역을 소유역 단위로 분할하고 HSPF 모형을 적용하여 팔당수계 소유역 지류에서의 수질 변화 양상이 본류에 미치는 영향을 분석하였다. 연구대상지역은 팔당수계 중권역 유역(남한강 하류 유역, 경안천 유역, 북한강 하류 유역)으로 구분하고 유역 유출 및 수질 모델링은 지류하천을 포함하는 57개 소유역을 대상으로 수행하였다. 입력자료는 공간자료(표고, 경사, 토지이용, 토양도 등)와 기상자료(춘천, 양평, 이천, 수원관측소)는 2008년~2018년의 강수량, 최고기온, 최저기온, 평균풍속, 평균습도 등의 시단위 자료를 사용하였다. 모의결과, BOD는 남한강 하류유역의 주요 지천 유역인 복하천, 양화천, 청미천 및 흑천 유역에서 0.54~0.56mg/L의 범위로 주변 유역보다 높게 나타났으며, 경안천 유역은 경안천 유역의 중·하류 유역에서 2.63~4.22mg/L의 범위로 높게 나타났고, 북한강 유역은 조종천 하류 및 북한강 상류 유역에서 1.36~3.31mg/L의 범위로 주변 유역보다 높게 나타났다. T-P는 남한강 하류 유역은 주요 지천 유역인 복하천, 양화천, 청미천 유역에서 0.07~0.19mg/L의 범위로 주변 유역보다 높게 나타났고, 남한강 하류 유역의 중간 지점 유역인 한강(E1, E2, E4, E6)에서 높게 나타났다. 경안천 유역은 중·하류 유역의 좌안측 유역인 경안(A4, A3, B2, B1, F9)에서 0.1~0.14mg/L의 범위로 높게 나타났으며, 북한강 유역은 전체 유역에서 0.06mg/L 이하로 남한강 하류 및 경안천 유역보다 전반적으로 낮게 나타났다. 이와 같이 지류총량관리에 HSPF 모형의 적용은 가능하였으나 HSPF 모형을 이용한 소유역 단위의 유량 및 수질 예측을 위해서는 기존의 유량 및 수질 관측망을 소유역 단위로 좀 더 정밀하게 계획하는 것이 필요하다고 판단된다.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.403-425
• /
• 2015

The Chicago Convention and Annexes have become the basis of aviation safety regulations for every contracting state. Generally, the State's aviation safety regulations refer to the Standards and Recommended Practices(SARPs) provided in the Annexes of the Chicago Convention. In order to properly reflect international aviation safety regulations, constant studies of the aviation fields are of paramount importance. This Paper is intended to identify the main differences between korean and foreign regulation and suggest a few amendment proposals on Mixed-fleet Flying(at or more two aircraft type operation) of flight crew. Comparing with these regulations, the korean regulations and implementations have some insufficiency points. I suggest some amendment proposals of korean regulations concerning Mixed-fleet Flying that flight crew operate aircraft of different types. Basically an operator shall not assign a pilot-in-command or a co-pilot to operate at the flight controls of a type of airplane during take-off and landing unless that pilot has operated the flight controls during at least three take-offs and landings within the preceding 90 days on the same type of airplane or in a flight simulator. Also, flight crew members are familiarized with the significant differences in equipment and/or procedures between concurrently operated types. An operator shall ensure that piloting technique and the ability to execute emergency procedures is checked in such a way as to demonstrate the pilot's competence on each type or variant of a type of airplane. Proficiency check shall be performed periodically. When an operator schedules flight crew on different types of airplanes with similar characteristics in terms of operating procedures, systems and handling, the State shall decide the requirements for each type of airplane can be combined. In conclusion, it is necessary for flight crew members to remain concurrently qualified to operate multiple types. The operator shall have a program to include, as a minimum, required differences training between types and qualification to maintain currency on each type. If the Operator utilizes flight crew members to concurrently operate aircraft of different types, the operator shall have qualification processes approved or accepted by the State. If applicable, the qualification curriculum as defined in the operator's Advanced Qualification Program could be applied. Flight crew members are familiarized with the significant differences in equipment and/or procedures between concurrently operated types. The difference among different types of airpcrafts decrease and standards for these airpcrafts can be applied increasingly because function and performance have been improved by aircraft manufacture company in accordance to basic aircraft system in terms of developing new aircrafts for flight standard procedure and safety of flight. Also, it becomes more necessary for flight crews to control multi aircraft types due to various aviation business and activation of leisure business. Nevertheless, in terms of flight crew training and qualification program, there are no regulations in Korea to be applied to new aircraft types differently in accordance with different levels. In addition, it has no choice different programs based on different levels because there are not provisions to restrict or limit and specific standards to operate at or more than two aircraft types for flight safety. Therefore the aviation authority introduce Flight Standardization and/or Operational Evaluation Board in order to analysis differences among aircraft types. In addition to that, the aviation authority should also improve standard flight evaluation and qualification system among different aircraft types for flight crews to apply reasonable training and qualification efficiently. For all the issue mentioned above, I have studied the ICAO SARPs and some state's regulation concerning operating aircraft of different types(Mixed-fleet flying), and suggested some proposals on the different aircraft type operation as an example of comprehensive problem solving. I hope that this paper is 1) to help understanding about the international issue, 2) to help the improvement of korean aviation regulations, 3) to help compliance with international standards and to contribute to the promotion of aviation safety, in addition.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.172-180
• /
• 2003

The purpose of this study is to observe the heat transfer process in in-vivo human muscle based on Proton Resonance Frequency(PRF) method in Magnetic Resonance Imaging(MRI). MRI was obtained to measure the temperature variation according to the heat transfer in phantom and in-vivo human calf muscle. A phantom(2% agarose gel) was used in this experiment. MR temperature measurement was compared with the direct temperature measurement using a T-type thermocouple. After heating agarose gel to more than 5$0^{\circ}C$ in boiling hot water, raw data were acquired every 3 minutes during one hour cooling period for a phantom case. For human study heat was forced to deliver into volunteer's calf muscle using hot pack. Reference data were once acquired before a hot pack emits heat and raw data were acquired every 2 minutes during 30minutes. Acquired raw data were reconstructed to phase-difference images with reference image to observe the temperature change. Phase-difference of the phantom was linearly proportional to the temperature change in the range of 34.2$^{\circ}C$ and 50.2$^{\circ}C$. Temperature resolution was 0.0457 radian /$^{\circ}C$(0.0038 ppm/$^{\circ}C$) in phantom case. In vivo-case, mean phase-difference in near region from the hot pack is smaller than that in far region. Different temperature distribution was observed in proportion to a distance from heat source.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.6
• /
• pp.79-89
• /
• 2014

The purpose of this study is to draw the implication for building domestic housing-related co-operatives by understanding activities of housing-related co-operatives from case study and by suggesting the start-up typology for possible domestic housing-related co-operatives and requisites for building them. According to their activities housing-related co-operatives are categorized into three types which are housing supply and operation type, maintain and improve the existing housing type, and design and performance improvement type. National housing policy should be connected to housing co-operatives indirectly. That is, the policy direction ought to be not toward controlling housing co-operatives, letting them supply more houses directly, but toward supporting voluntary co-operatives, showing them the overall housing policy blueprint. Co-operatives cannot be a panacea. Too much protection or support for co-operatives could lead to a reverse discrimination against private companies, and the co-operatives might overuse this kind of prominent position. We need to focus on the possibility of the role of co-operatives as a facilitator for local economy rather than a perfect substitute for the existing economy system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.649-660
• /
• 2021

Through analytical method based on S-76 model, the level of rotor hub vibration reduction was analyzed according to higher harmonic actuating by individual blade control. The higher harmonic actuating method for individual blades was divided into a method of generating an additional actuating force from the pitch-link in the rotating part and generating actuating force through the active trailing edge flap control of the blade. In the 100kts forward flight conditions, the hub load analysis was performed by changing the phase angle of 15 degree for the 2P/3P/4P/5P harmonic actuation for individual blades. Through the harmonic actuation results, the sensitivity of the rotor system according to the actuating conditions was analyzed, and the T-matrix representing the characteristics of the rotor system was derived based on this analysis result. And through this T-matrix, optimal higher harmonic actuating condition was derived to minimize hub vibration level for flight condition. In addition, the effect on the performance of the rotor system and the pitch-link load under minimum hub vibration condition, as well as the noise influence through the noise analysis were confirmed.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.161-167
• /
• 2019

In this paper, the performance verification of an around-view sonar and an excavation depth measuring sonar applicable to track-based ROVs (Remotely Operated underwater Vehicles) for heavy duty work is studied. For the performance verification, an experiment is carried out in a water tank and at sea by attaching the around-view sonar and the excavation depth measuring sonar for a heavy work ROV. In the case of the around-view sonar, image sonars are mounted on ROV in four directions (front, back, left and right) and in the case of the excavation depth measuring sonar, the same kind of MBES (Multi Beam Echo Sounder) is mounted on the front of the ROV. The result of an operation test of the ROV equipped with these sonars shows that the sonar systems are rarely affected by high turbidity due to sedimentation during the operation. In the case of the around-view sonar, it is possible to see rock formation, gravel and sandbank 30 m ahead of the ROV. It is confirmed that the excavation depth can be measured after the ROV has performed the excavation. This experiment demonstrates that the ROV can improve the efficiency of the work by utilizing the around-view sonar and the excavation depth measuring sonar.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.1
• /
• pp.60-66
• /
• 2023

Currently, the maritime industry is focusing on developing technologies that promote autonomy and intelligence, such as smart ships, autonomous ships, and eco-friendly technologies, to enhance ship operational efficiency. Many countries are conducting research on different methods to ensure ship safety while increasing operational efficiency. This study aims to develop a real-time ship operational efficiency analysis model using data analysis methods to address the current limitations of the present technologies in the real-time evaluation of operational efficiency. The model selected ship operational efficiency factors and ship operational condition factors to compare the operational efficiency of the ship with present and classified factors to determine whether the present ship operational efficiency is appropriate. The study involved selecting a target ship, collecting data, preprocessing data, and developing classification models. The results of the research were obtained by determining the improved ship operational efficiency based on the ship operational condition factors to support ship operators.