• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.74-79
• /
• 2002

Many control techniques have been proposed in order to improve the control performance in discrete-time domain control system. In control system using these techniques, the response-characteristic of system is dependent on the gains of the controller. Specially, There is a need to readjust the gain of controller when the response of system is changed by disturbance or load fluctuation. In this paper, I-PD controller and pre-compensator are designed by multilayer neural network. The gains of I-PD controller and pre-compensator are adjusted automatically by back propagation algorithm when the response characteristic of system is changed under a condition. Applying this control technique to the position control system using a DC servo motor as a driver, the control performance of controller is verified by the results of experiment.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.163.2-163.2
• /
• 2012

다목적실용위성 3호는 2012년 5월 발사되어, 위성 기능점검을 위한 시험을 성공적으로 완료하였다. 위성이 발사체로부터 분리된 이후 임무궤도(고도 685km, 승교점 지방시 13시 30분을 갖는 태양동기궤도)를 획득하기 위해서는 궤도조정이 필요하다. 본 논문에서는 다목적실용위성 3호의 초기운영 기간 동안 수행한 총 10번의 궤도조정 계획 및 결과에 대해 기술하였다. 궤도조정 1 단계에서는 궤도조정 절차 및 기능을 점검하기 위해 6번의 시험 궤도조정을 순차적으로 수행하였고 이후 2 단계에서는 임무궤도 진입을 위해 4번의 궤도조정을 실시하였다. 궤도조정을 위해서는 원하는 추력분사 방향을 맞추기 위해 롤 방향 또는 피치 방향의 자세제어가 필요한데, 추력기를 사용하여 자세를 기동하는 모드(Del-V Mode)와 휠을 사용하여 자세를 기동하는 모드(Fine Del-V Mode)로 구분된다. 시험 궤도조정에서는 우선적으로 두 가지 모드에 대한 모드전환 시험을 실시하여 위성체 및 지상국 운영절차에 대한 이상 유무를 점검하였고, 이후 추력기 분사량을 10초로 설정하여 예측 대비 실제 궤도변경 결과값을 확인하였다. 시험 궤도조정의 결과를 토대로 본 궤도조정에서는 임무궤도를 획득하기 위한 경사각 조정 및 고도 조정을 수행하였다. 경사각 조정 시에는 승교점 지방시의 변화량을 줄이고, 이후 자연 교란력에 의한 궤도변화를 고려하여 목표궤도를 계획하였다. 또한, 고도 조정 단계에서는 연료 사용량 및 이심률 변화를 최소화 할 수 있도록 전형적인 호만 궤도천이 방식을 적용하였다. 궤도조정 결과 당초 목표한 값을 정확하게 달성하였고, 궤도조정 이후 궤도변화도 장기간 동안 임무궤도 범위를 유지함을 확인할 수 있었다.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.531-536
• /
• 2007

In this paper we present an interpolation-LQ control technique which tunes continuously the controller gain by interpolating the gains of sub-LQ controllers. The proposed controller design technique is applied to the container crane system for simulations. Several cases of simulations are carried out in order to prove the control effectiveness and robustness. The simulation results of the proposed controller are compared with those of LQ controllers. The results showed better control performance than those of LQ controllers.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.31-39
• /
• 2012

In this paper, we propose a microprocessor-based automatic voltage regulator(AVR) to reduce consumers' electric energy consumption and to help controlling peak demanding power. Hybrid Switching Automatic Voltage Regulator (HS-AVR) consist of a toroidal core, several tap control switches, display and command control parts. The coil forms an autotransformer which has a serial main winding and four parallel auxiliary windings. It controls the output voltage by changing the combination of the coils and the switches. Relays are adopted as the link switches of the coils to minimize the loss. To make connecting and disconnecting time accurate, relays of the circuit have parallel TRIACs. A software phase locked loop(PLL) has been used to synchronize the timings of the switches to the voltage waveform. The software PLL informs the input voltage zero-crossing and positive/negative peak timing. The traditional voltage transformers and AVRs have a disadvantage of having a large mandatory capacity to accommodate maximum inrush current to avoid the switch contact damage. But we propose a suitable AVR for every purpose in smart grid with reduced size and increased efficiency.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.142-149
• /
• 1997

This paper applied one of the well-known optimal control theory, namely, linear quadratic regulator(LQR), to the station-keeping maneuvers(SKM) for a geostationary satellite. The boundary conditions to transfer the system with a good accuracy at a terminal time were based upon the predicted orbital data which are created due to the Earth's non-uniform mass distribution's effect during 14 days and due to luni-solar effect during 28 days. Through the linearization of the nonlinear system equation with respect to reference orbit and the numerical integration of Riccati equation, the optimal trajectories and the corresponding control law have been obtained by using LQR. From the comparison of ${\Delta}V$ obtained by LQR with the ${\Delta}V$ obtained anatically by geometric method, Station Keeping Maneuvers(SKM) via LQR may provide comparable results to a real system. Furthermore it will demonstrate the possibility in fuel optimization and life extension of geostationary satellite.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.2
• /
• pp.58-69
• /
• 1995

In this paper GFI (Generalized Fuzzy Isodata) and FI (Fuzzy Isodata) algorithms are studied and applied to the tire tread pattern classification problem. GFI algorithm which repeatedly grouping the partitioned cluster depending on the fuzzy partition matrix is general form of GI algorithm. In the constructing the binary tree using GFI algorithm cluster validity, namely, whether partitioned cluster is feasible or not is checked and construction of the binary tree is obtained by FDH clustering algorithm. These algorithms show the good performance in selecting the prototypes of each patterns and classifying patterns. Directions of edge in the preprocessed image of tire tread pattern are selected as features of pattern. These features are thought to have useful information which well represents the characteristics of patterns.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.69-79
• /
• 1999

The research and implementation was preformed on high-resolution CCTV camera with CCD exclusive DSP conventional analog signal processor CCTV camera has its limit on auto exposure(AE), auto white balance(AWB), back light compensation(BLC) processing, severe distortion and noise of image, manual control parameter setting, etc. In our study, to resolve the problems in conventional CCTV camera, we made it possible to control AE, AWB, BLC automatically by the use of the DSP, which are used exclusively in the CCD camera produced domestically, and the microcontroller. And we utilized the function of screen display of microcontroller for the user-friendly interface to control CCD camera. And the electronic variable resister(EVR) was used to avoid setting parameters manually in the level of manufacturing process. As the result, It became possible to control parameters of the camera by program. And the cost-down effect was accomplished by improving the reliability of parameter values and reducing the efforts in setting parameters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.754-757
• /
• 2007

This paper presents automatic LCD gamma control system using gamma curve optimization. It controls automatically gamma adjustment registers in mobile LCD driver IC to reduce average gamma error and adjusting time. The proposed gamma system contains module-under-test (MUT, LCD module), PC installed with program, multimedia display tester for measuring luminance, and control board for interface between PC and LCD module. We have developed a new algorithm using 6-point programmable matching technique with reference gamma curve. Developed algorithm and program are generally applicable for most of the LCD modules.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.464-470
• /
• 2004

We propose an enhanced backpropagation algorithm by auto-tuning of learning rate using fuzzy control system for performance improvement of backpropagation algorithm. We propose two methods, which improve local minima and loaming times problem. First, if absolute value of difference between target and actual output value is smaller than $\varepsilon$ or the same, we define it as correctness. And if bigger than $\varepsilon$, we define it as incorrectness. Second, instead of choosing a fixed learning rate, the proposed method is used to dynamically adjust learning rate using fuzzy control system. The inputs of fuzzy control system are number of correctness and incorrectness, and the output is the Loaming rate. For the evaluation of performance of the proposed method, we applied the XOR problem and numeral patterns classification The experimentation results showed that the proposed method has improved the performance compared to the conventional backpropagatiot the backpropagation with momentum, and the Jacob's delta-bar-delta method.

• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.83-90
• /
• 1999

제어이론분야에서의 발전은 그러한 이론을 다방면으로 응요할 수 있는 분야를 더더욱 폭넓게 제공해 주고 있다. 자동화와 관련된 분야뿐만 아니라, 건축 및 토목분야에서도 고도의 제어어이론을 응용한 예를 쉽게 접할 수 있게 되었으며, 지진동에 의한 구조물의 진동을 억제하려는 방책이 그 ??ㅣ다. 이에 관한 많은 연구에서도 알 수 있듯이, 일반적으로 구조물의 수학적 모델에만 의존하여, 즉 구조물의 설계파라미터는 이미 설계되어져 있다는 가정하에 제어계를 설계하고 있다. 그러나 이러한 설계법에 있어서는 설계자로 하여금 구조물의 설계파라미터를 조정할 수 있는 자유도는 전혀 주어지지 않게 되며 단지 제어계의 파라미터를 조정하는 자유도만 허용된다. 이러한 문제점을 극복하기 위해 구조계 및 제어기의 설계파라미터를 동시에 조절할 수 있는 자유도가 허용되는 '구조계/제어계의 동시 최적화' 기법이 있다. 따라서 본 논문에서는 교량의 주탑 및 해양구조물 등의 진동제어 문제에 이러한 설계기법을 이용하여 주어진 설계사양을 만족하도록 구조계 및 제어계의 파라미터를 최적화 한다. 특히 본 논문에서는 제어계 설계 문제에 있어서의 일반적인 경우를 고려하여 상태의 일부가 관측된다고 가정하고 출력피드백의 경우에 대해 고찰하고 있다. 이때의 설계사양은 선형행렬부등식(LMI)으로 주어지며, 실험을 통하여 본 논문에서 소개하는 설계기법의 유효성을 검증한다.