• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.137-148
• /
• 2008

There have been many cases of using wetlands as an alternative in controlling stormwater, treating mining leachate, and agricultural discharge, and so on, recently. The reality is, however, that the wetlands are not properly applicable because of the lack of enough longterm data for wetlands due to the difficulty of long-term monitoring. Therefore, this study tries to analyze the storage of Upo, Mokpo, Sajipo, and Jjokjibeul in Topyeong watershed using SWAT(Soil and Water Assessment Tool) model, one of the long-term runoff hydrologic model, for the purpose of generating the long-term data and analyzing the hydrologic behavior of wetlands based on the generated data. Also, the changes in runoff at the outlet are analyzed after applying the simulation of constructing washland in Topyeong watershed and the storage in Upo is analyzed. The result shows that the runoff at the outlet of the watershed is decreased in rainy season from July to August and increased in dry season from December to February. In addition, the analysis of Upo storage concludes that Upo can be influenced by the construction of the washland. The duration curve of washland is then analyzed in order to evaluate the wetland's sustainability in terms of washland and it appears that the runoff of washland is simulated to be less than that of the existing wetland. Moreover, runoffs of some washlands are simulated to be less even in wet season. These results lead to the fact that there should be further hydrologic management for constructed washland. Then, the changes in loads (TN and TP) because of constructing washland are analyzed. The result shows that the loads are reduced because of the construction. Also, the changes in loads due to the construction of buffer strips are analyzed to compare the load reductions caused by a washland. Finally, REMM model, a riparian management model, is applied to overcome the hydrologic ambiguousness of SWAT model, and then, the SWAT model results are compared to those of REMM.

• Journal of Hospice and Palliative Care
• /
• v.9 no.2
• /
• pp.93-100
• /
• 2006

Purpose: This study was designed to understand the doctor's attitude toward hospice and palliative care for terminal cancer patients. Methods: Specialists who work at general hospital were surveyed with questionnaires about hospice and palliative care for terminal cancer patients. The questionnaires comprise 17 items. The data were statistically analyzed. Results: Eighty one doctors responded. Their median age was 35 years old. Thirty six doctors (44.4%) were from internal medicine. The median of specialist's experience was 4 years. Forty three respondents (53.2%) have rarely examined and treated cancer patients even a week. Thirty seven respondents (45.6%) knew the exact definition of hospice and palliative care. Eighty respondents (98.8%) felt that hospice and palliative care is necessary, and 91.2% of them responded the necessity of palliative medicine specialist. As to the question 'Do you positively referred terminal cancer patient to hospice and palliative care?', 55 respondents (67.9%) responded 'Yes' and 22 (27.2%) 'No'. Among the 'Yes' respondents 17 (30.9%) had an experience of hesitation for referring patients to hospice and palliative care; the most common reason was the disagreement of family members (6, 35.3%). As for the reasons of responding 'No', 6 doctors (27.2%) did so because of their 'feeling of abandoning the patients' and the other f for the 'lack of information on the referral procedure for hospice and palliative care'. Thirty seven specialists (45.7%) thought it is most desirable for the patients to have hospice and palliative care for 3 months before death. Fifty eight specialists (71.6%) responded that hospice and palliative care help controlling the patient's psychological symptoms before all. Conclusion: While most doctors recognize the need of hospice and palliative care for patients with terminal ranter, their attitude toward hospice and palliative care was rather reserved. We suggest that continuing education, information and promotion for hospice and palliative care should be provided for doctors.

• Journal of dental hygiene science
• /
• v.7 no.4
• /
• pp.287-293
• /
• 2007

As a result of having surveyed and analyzed recognition and requirement of dental hygienists for Academic Credit Bank System, the recognition on Academic Credit Bank System accounted for 70.8%, and in terms of information media recognized, surrounding people were the highest with 52.4%. And, in case of the response as saying of being willing to participate, an opportunity of acquiring a bachelor's degree accounted for 24.0%, and in case of the response as saying of being unwilling to participate, the lack of time that will take part in education activity accounted for 13.7%, thereby having been surveyed to be the most preferential choice, respectively. The importance by sphere in course programs was indicated to be the sphere of preventive dental treatment with 3.61, the sphere of dental management with 3.38, the sphere of oral health education with 3.09, the sphere of medical-treatment coordination with 2.82, and the sphere of community dental health with 2.11 in order. The importance by field of sphere in course programs was indicated to be high in the field of oral health education by subject with 2.30 for the field of sphere in oral health education, in the field of plaque control and oral prophylaxis with 3.53 for the field of sphere in preventive dental treatment, in the field of management of the fluoride mouth-rinsing programme with 2.86 for the field of sphere in community dental health, in the field of counselling with 3.24 for the field of sphere in dental management, and in the field of medical-treatment assistance with 1.53 for the field of sphere in medical-treatment coordination.

• The korean journal of orthodontics
• /
• v.33 no.2 s.97
• /
• pp.131-140
• /
• 2003

The purpose of this study was to evaluate clinical applications of electroplating method through investigation of the physical properties of orthodontic rectangular wires according to varying their cross section. For the study, it was accomplished to electroplate the 0.016-inched orthodontic rectangular stainless steel wire. The cross section of stainless steel orthodontic rectangular wire increased from $0.016{\times}0.016inch\;to\;0.017{times}0.017inch$ by electroplating. The wire was heat treated to improve an adhesion between the wire and electroplated metal. h three-point bending test and torsion test were conducted in order to compare physical properties among three wire groups; $0.016{\times}0.016wires(group 016),\; electroplated\;0.016{\times}0.016wires(group\;016P)\;and\;0.017{\times}0.017$ wires (group 017). Through the investigations of each wire group, following results were obtained 1. At three-point bending test, the group Ol6P showed higher tendency in the degree of stiffness, yield strength and ultimate tensile strength than the group 016. Stiffness and ultimate tensile strength showed statistically significant differences between two groups at three-point bending test (p<0.05). 2. Stiffness, yield strength, and ultimate tensile strength of the group 016P showed lower tendency than those of the group 017 Stiffness showed statistically significant differences between two groups at three-point bending test (p<0.05). 3. Torque/twist rate, yield torsional moment, and ultimate torsional moment of the group 016P showed higher tendency than those of the group 016. All measurements showed statistically significant differences between two groups alter torsion test (p<0.05). 4. Torque/twist rate, yield torsional moment, and ultimate torsional moment of the group 0166P showed lower tendency than those of the group 017. Yield torsional moment, and ultimate torsional moment showed statistically significant differences between two groups after torsion test (p<0.05).

• Applied Microscopy
• /
• v.30 no.4
• /
• pp.357-365
• /
• 2000

Paneth cells have been suggested to contribute to the elimination of excess metals into the intestinal lumen. The purpose of this study wat to investigate the changes of the zinc pools in rats subjected to functional loading with zinc salt by mean of both light and electron microscopical autometallography (AMG). Wistar rats 4 were administrated with zinc chloride (20 mg/kg body weight) intraperitoneally dissolved in 1 ml distilled water. The control group received 1 ml saline IP. After further one hour the animals were transcardially perfused with 0.4% sodium sulphide dissolved in 0.1 M PB fellowed by 3% glutaraldehyde solution for 10 minutes. Pieces of ileum were frozen with solid $CO_2$ and sectioned on a cryostat. The sections $(20{\mu}m)$ were autometallographically developed. Sections selected for EM were reembedded on top of a blank Epon block, from which ultrathin sections (100 nm) were cut. The ultrathin sections were double stained with uranyl acetate (30 min) and lead citrate (5 min), then examined under electron microscope. Studies of comparable sections from control and zinc loaded animals with the AMG selenium method gave quite different results. The control animals demonstrated a weakly positive staining in the cytoplasm of the Paneth cells. In the electron microscope the AMG silver grains were found to be located in the cytoplasm, while the electron dense secretary granules and other cell organelles were void of staining. Few AMG grains were located at the apical surface of the Paneth cells. In sections from zinc loaded rats, the AMG grains were seen in abundance in the lumen of the Lieberkuhn crypts at light microscopic levels. At EM levels the zinc revealing silver grains were located in the cytoplasm as in the controls, but much more AMG grains were shifted into the secretary granules. Furthermore, profound AMG grains were found in the lumen of the crypts and surrounding vessels. And a few grains were seen in the endothelium. The AMG technique demonstrated a pattern of AMG grains in the Paneth cells that strongly suggests a transport of zinc ions through these cells.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.5
• /
• pp.523-531
• /
• 2004

Background : Bronchoscopy in patients on mechanical ventilation is being performed much more frequently. However, there is little data on the changes in physiologic parameters and no established mechanical ventilation protocol during bronchoscopy. A decreasing or the removal of positive end-expiratory pressure (PEEP) during bronchoscopy may precipitate severe hypoxemia and/or derecruitment. Methods : Our standardized mechanical ventilation protocol, without changing the PEEP level, was used during bronchoscopy. The physiological parameters were measured during the bronchoscopic procedure. Results : During bronchoscopy, respiratory acidosis, elevation of peak pressure, elevation of heart rate and auto-PEEP were developed, but were reversible changes. Procedure-related gross barotraumas or other severe complications did not developed. Conclusion : No serious complications developed during bronchoscopy under our standardized mechanical ventilation protocol when the PEEP level remained unchanged. The procedure time should be kept to a minimum to decrease the exposure time to undesirable physiological changes.

• Journal of Dairy Science and Biotechnology
• /
• v.29 no.1
• /
• pp.23-31
• /
• 2011

Domestic dairy industry is now standing at the crossroad for planning next fifty years, mainly because economic and environmental situations surrounding Korean peninsula are fast changing. For the aspects of dairy consumption, fresh milk consumed less, while consumption of the other milk and dairy products is slightly increasing every year. In 2010, it is approximately estimated that 1,939,000 tons of raw milk was used and the supply would be short by about 35,000 tons, based on the amounts in the previous year. Currently, multilateral negotiations against US and EU are underway. When it will be in effect in the future, significant damage would be expected in the dairy and livestock sectors, leading to cut domestic milk supply. Quality of farm-gate milk is graded as 1A on average 90% or more, loaded with very low in microbial and somatic cell counts. Therefore, policy implications have to be placed toward switch currently the UHT processing method to Pasteurization or the LTLT technology, by which natural flavors and nutrients in milk mostly remain after heat treatment. Domestic cheese products comprise only 10% and the rest is occupied by the various kinds of imported natural products. The market size keeps increasing up to 65,423,000 tons last year. When it comes to vitalization of our natural cheese industry, cheese whey, which is a main by-product in cheese manufacture, is a critical issue to be solved and also "On-Farm Processing" would be combined with a growth of big dairy companies when few immediate issues among the relevant regulations will be eased and alleviated in the near future. Fermented milk market is recorded as a single area of gradual increase in the past 10 years, Korea. Fermented yogurts with health claims targeted stomach, liver, and intestine are popular and has grown fast in sales amounts. In this context, researches on beneficial probiotic lactic acid bacteria are one of the important projects for domestic milk and dairy industries. Labelling regulations on efficacy or health-promoting effects of functional dairy products, which is the most important issue facing domestic dairy processors, should be urgently examined toward commercial expression of the functionality by lawful means. Colostrum, a nutrition-rich yellowish fluid, is roaded with immune, growth and tissue repair factors. Bovine colostrum, a raw material for immune milk preparations and infant formula, can be used to treat or prevent infections of the gastrointestinal tract. Nanotechnology can be applied to develop new milk and dairy products such as micro-encapsulated lactase milk for consumers suffering lactose intolerance. Raw milk is suggested to be managed by its usage in the processing line because imbalance of supply and demand is structural problem in every country and thus the usage systems as in the advanced dairy countries is worth of bench-marking to stabilize milk supply and demand. Raw milk produced is desirable to divide into the three parts; domestic, import, and buffering purposes. It is strongly recommended that a domestic dairy control center as an institutional framework should be urgently established as is Dairy Board in New Zealand and Australia. Lastly, government policy should be directed to foster the highly-educated people who are majoring in Dairy Sciences or working in the dairy industry by means of financial support in studying and training abroad as well.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.157-165
• /
• 2006

The change of external/internal factors of the cell rquires specific biological functions to maintain life. Such functions encourage particular genes to jnteract/regulate each other in multiple ways. Accordingly, we applied a linear decomposition model IFSA, which derives hidden variables, called the 'expression mode' that corresponds to the functions. To interpret gene interaction/regulation, we used a cross-correlation method given an expression mode. Linear decomposition models such as principal component analysis (PCA) and independent component analysis (ICA) were shown to be useful in analyzing high dimensional DNA microarray data, compared to clustering methods. These methods assume that gene expression is controlled by a linear combination of uncorrelated/indepdendent latent variables. However these methods have some difficulty in grouping similar patterns which are slightly time-delayed or asymmetric since only exactly matched Patterns are considered. In order to overcome this, we employ the (IFSA) method of [1] to locate phase- and shut-invariant features. Membership scoring functions play an important role to classify genes since linear decomposition models basically aim at data reduction not but at grouping data. We address a new function essential to the IFSA method. In this paper we stress that IFSA is useful in grouping functionally-related genes in the presence of time-shift and expression phase variance. Ultimately, we propose a new approach to investigate the multiple interaction information of genes.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.129-138
• /
• 2006

It is expected that the typical lifestyle of the future will be transformed into an opulent and comfortable existence as the quality of life improves due to the increase in household income and reduction in working hours. In the meantime, as the standard of living becomes increasingly more comfortable and plentiful, the toll on physical health becomes magnified as a result of obesity and insufficient exercise caused by super nutrition and change in labor conditions (from physical labor to mental labor). This has instigated a deep awareness in fitness on the part of many people, forcing them to recognize the significance of daily exercise and physical activity. The high annual growth rate in the fitness and athletic apparatus market, which is more than 20%, is attributed to this phenomenon. The Elliptical Cross Trainer(ECT), which has drawn wide attention recently, is a non-impact athletic apparatus that not only promotes exercise of the upper body parts in such sports as skiing but also the exercise of lower parts of the body on a treadmill. It is a type of cross training athletic gear that has been developed for aerobic exercise throughout the entire body. It has already formed a market as big as that of the treadmill in Europe, America, etc. Recently, its demand is growing sharply in the Korean markets as well as those in Northeast Asian countries, Despite such demand increase and expansion, since most of the expensive ECTs are exclusively supplied by suppliers in only a few advanced countries, localization of the ECT is urgently required in order to enhance competitiveness of Korean manufacturers and to expand the market. This paper introduces the process and results of a design-engineering cooperative study that was peformed for the development of the ECT.

• Korean Journal of Psychosomatic Medicine
• /
• v.17 no.1
• /
• pp.8-14
• /
• 2009

Objectives : The purpose of this study was to investigate the various aspects of stress in patients with chronic prostatitis. Methods : Thirty two chronic prostatitis patients meeting the criteria of NIH-category III were compared with sixty four controls. Data pertaining to the source of, response to, and coping with stress, as well as chronic prostatitis symptom index were collected using a self-report questionnaire. The questionnaire consisted of a Global Assessment of Recent Stress(GARS), Stress Response Inventory(SRI), Ways of Coping Checklist(WCC), in addition to the NIH-CPSI. Results : From the results of GARS subscales, the scores of changes in relationship, sickness or injury and financial were significantly higher in patients with chronic prostatitis than normal controls. Chronic prostatitis patients had greater amplification of somatization, depression and anger in SRI and significantly lower score in ways of coping checklist compared with controls. In the NIH-CPSI of chronic prostatitis patients, the degree of symptom played a role in depression as stress response item and significant negative correlationship between the symptom point and problem focused, seeking social support coping strategy was observed. Conclusion : These results show that patients with chronic prostatitis have greater stress, higher stress response and insufficient coping strategy. Therefore, these efforts should be considered that enhancing healthier coping strategy and evaluation and management of stress experienced by chronic protatitis patients